-
Vendor: IRWIN
Irwin 213104 Dovetail/Detail Saw, 7-1/4 in L Blade, 22 TPI, ProTouch Grip Handle, Polymer Handle
Used to flush cut dowels or fine detail cut such as work around windows and door frames. Pull stroke action eliminates binding and facilitates a straight cut. Induction hardened teeth stay sharp longer. Quick release button for blade replacement. Interior trim contractor/detail work around...- $18.28
- $18.28
- Unit price
- per
-
Vendor: IRWIN
Irwin 218HP-300 Bow/Hacksaw, 12 in L Blade, 8/18 TPI, Steel Handle
Saw contains both a wood cutting and a hacksaw blade. Ideal for gardening, pruning and metal cutting. Welded frame offers stability, no flex and faster cut. Knuckle guard protects your hand while sawing. 6 in deep throat design makes cutting plastic pipe and small...- $21.86
- $21.86
- Unit price
- per
-
Vendor: IRWIN
Irwin 22007 Tinner Snip, 7 in OAL, 1-1/2 in L Cut, Curved, Straight Cut, Steel Blade, Double-Dipped Handle
Irwin® Aviation and offset snips feature hot-drop-forged steel blades for a sharper cutting edge and greater strength. Ergonomically designed ProTouch™ grips and long-life spring increase leverage and optimize cuts. Precision ground edges on the blades ensure a tight grip on each cut for excellent...- $14.28
- $14.28
- Unit price
- per
-
Vendor: IRWIN
Irwin 22010 Tinner Snip, 10 in OAL, 2 in L Cut, Curved, Straight Cut, Steel Blade, Double-Dipped Handle, Blue Handle
Irwin® Aviation and offset snips feature hot-drop-forged steel blades for a sharper cutting edge and greater strength. Ergonomically designed ProTouch™ grips and long-life spring increase leverage and optimize cuts. Precision ground edges on the blades ensure a tight grip on each cut for excellent...- $17.72
- $17.72
- Unit price
- per
-
Vendor: IRWIN
Irwin 22012 Tinner Snip, 12-3/4 in OAL, 2-3/4 in L Cut, Curved, Straight Cut, Steel Blade, Double-Dipped Handle
Irwin® Aviation and offset snips feature hot-drop-forged steel blades for a sharper cutting edge and greater strength. Ergonomically designed ProTouch™ grips and long-life spring increase leverage and optimize cuts. Precision ground edges on the blades ensure a tight grip on each cut for excellent...- $22.36
- $22.36
- Unit price
- per
-
Vendor: IRWIN
Irwin 222601 Spring Clamp with Soft Grip Pad, 1 in Clamping, Steel, Blue/Silver
Metal spring clamps with soft-grip pads.- $3.00
- $3.00
- Unit price
- per
-
Vendor: IRWIN
Irwin 222702 Spring Clamp with Soft Grip Pad, 2 in Clamping, Steel, Blue/Silver
Metal spring clamps with soft-grip pads.- $4.62
- $4.62
- Unit price
- per
-
Vendor: IRWIN
Irwin 222803 Spring Clamp with Soft Grip Pad, 3 in Clamping, Steel, Blue/Silver
Metal spring clamps with soft-grip pads.- $7.08
- $7.08
- Unit price
- per
-
Vendor: IRWIN
Irwin 223118 Throat Depth Bar Clamp, 18 in Max Opening Size, 3-1/8 in D Throat
Clutch lock steel bar clamp with soft-grip handle is larger and more ergonomic, allowing high clamping pressure with less effort I-beam bar reduces flexing and bowing. Larger clutch plates allow for easier release and increase durability and dependability. Throat depth of 3-1/8 in. Soft...- $19.65
- $19.65
- Unit price
- per
-
Vendor: IRWIN
Irwin 224134 Pipe Clamp, 600 lb, Clamping Range: 3/4 in, Ergonomic Handle, Steel
New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle. Larger clutch plates allow for easier release and increased durability and dependability. Innovative clutch system eliminates the need for threaded...- $19.52
- $19.52
- Unit price
- per
-
Vendor: IRWIN
Irwin 224212 Pipe Clamp, 1500 lb, Clamping Range: 1/2 in, Ergonomic Handle, HCS
New clutch system eliminates the need for threaded pipe. Larger feet offer more stability and clearance between handle and worktop. Larger, more ergonomic handle. Larger clutch plates allow for easier release and increased durability and dependability. Innovative clutch system eliminates the need for threaded...- $17.46
- $17.46
- Unit price
- per
-
Vendor: IRWIN
Irwin 225101ZR C-Clamp, 900 lb Clamping, 1 in Max Opening Size, 1-3/16 in D Throat, Steel Body
Larger handle on this C-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue, double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps for woodworkers,...- $3.00
- $3.00
- Unit price
- per
-
Vendor: IRWIN
Irwin 225102ZR C-Clamp, 900 lb Clamping, 2 in Max Opening Size, 1-5/16 in D Throat, Steel Body
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.- $3.76
- $3.76
- Unit price
- per
-
Vendor: IRWIN
Irwin 225103ZR C-Clamp, 3 in Max Opening Size, 2-1/4 in D Throat, Cast Iron Body, Blue Body
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue.- $6.84
- $6.84
- Unit price
- per
-
Vendor: IRWIN
Irwin 225104 C-Clamp, 900 lb Clamping, 4 in Max Opening Size, 3 in D Throat, Steel Body, Blue Body
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Double-rolled thread for faster clamping and increased durability Larger swivel pad reduces...- $9.04
- $9.04
- Unit price
- per
-
Vendor: IRWIN
Irwin 225105 C-Clamp, 10 lb Clamping, 5 in Max Opening Size, 3-1/4 in D Throat, Steel Body, Blue Body
Larger handle on this C-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue, double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps for woodworkers,...- $12.81
- $12.81
- Unit price
- per
-
Vendor: IRWIN
Irwin 225106 C-Clamp, 900 lb Clamping, 6 in Max Opening Size, 3-1/2 in D Throat, Steel Body, Blue Body
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Double-rolled thread for faster clamping and increased durability Larger swivel pad reduces...- $11.40
- $11.40
- Unit price
- per
-
Vendor: IRWIN
Irwin 225108 C-Clamp, 900 lb Clamping, 8 in Max Opening Size, 4 in D Throat, Steel Body, Blue Body
Larger handle on this C-clamp makes it easier to apply torque for more clamping pressure with less hand fatigue, double-threaded screw reduces screw deflection and drift for faster clamping and allows you to apply 50% more clamping force than with most clamps for woodworkers,...- $17.69
- $17.69
- Unit price
- per
-
Vendor: IRWIN
Irwin 225123 C-Clamp, 900 lb Clamping, 2 in Max Opening Size, 3-1/2 in D Throat, Steel Body, Blue Body
Double-rolled thread for faster clamping and increased durability. Larger swivel pad reduces marring on work surface and increases stability. Larger handle for greater clamping pressure with less effort and reduced hand fatigue. Double-rolled thread for faster clamping and increased durability Larger swivel pad reduces...- $6.63
- $6.63
- Unit price
- per
-
Vendor: IRWIN
Irwin 226100 Band Clamp, 350 lb Clamping, 14 in Max Opening Size, 1 in D Throat, Nylon Body, Blue/Silver Body
For use on large and irregular-shaped projects; the mechanical clamp parts are made of metal, the nylon band can hold up to 350 lb. 1 in x 15 ft band clamp allows you to clamp large projects- $16.63
- $16.63
- Unit price
- per
-
Vendor: IRWIN
Irwin 226304ZR Workshop Vise, 4-1/4 in Jaw Opening, 4 in W Jaw, 2.2 in D Throat, Steel
Made of forged iron. Can hold up to 3000 lb of clamping pressure. Provides top clamping pressures for heavy-duty jobs. Clamping capacity of 4-1/4 in and throat depth of 2-1/2 in. Anvil and pipe jaws incorporated Features aggressive steel jaws- $74.05
- $74.05
- Unit price
- per
-
Vendor: IRWIN
Irwin 226410 Angle Clamp, 200 lb Clamping, Plastic Body
Designed to hold materials up to 3 in thick, at 90 deg angle. Designed to hold material up to 3 in thick at a 90 deg angle- $27.94
- $27.94
- Unit price
- per
-
Vendor: IRWIN
Irwin 23 Sheet Metal Tool, 8 in OAL, 3-1/8 in Jaw Opening
Made of high-grade, heat-treated alloy steel for maximum toughness and durability. Turn screw to adjust pressure and fit work, stays adjusted for repetitive use. Classic trigger release to provide maximum locking force for easier bending, forming and crimping of sheet metal. Makes bending, forming...- $19.27
- $19.27
- Unit price
- per
-
Vendor: IRWIN
Irwin 23007 Tinner Snip, 7 in OAL, 2 in L Cut, Curved, Straight Cut, Steel Blade, Double-Dipped Handle, Green Handle
Irwin® Aviation and offset snips feature hot-drop-forged steel blades for a sharper cutting edge and greater strength. Ergonomically designed ProTouch™ grips and long-life spring increase leverage and optimize cuts. Precision ground edges on the blades ensure a tight grip on each cut for excellent...- $12.95
- $12.95
- Unit price
- per
-
Vendor: IRWIN
Irwin 23010 Tinner Snip, 10 in OAL, 2 in L Cut, Curved, Straight Cut, Steel Blade, Double-Dipped Handle, Yellow Handle
Irwin® Aviation and offset snips feature hot-drop-forged steel blades for a sharper cutting edge and greater strength. Ergonomically designed ProTouch™ grips and long-life spring increase leverage and optimize cuts. Precision ground edges on the blades ensure a tight grip on each cut for excellent...- $18.27
- $18.27
- Unit price
- per
-
Vendor: IRWIN
Irwin 23012 Tinner Snip, 12-3/4 in OAL, 2-3/4 in L Cut, Curved, Straight Cut, Steel Blade, Double-Dipped Handle
Irwin® Aviation and offset snips feature hot-drop-forged steel blades for a sharper cutting edge and greater strength. Ergonomically designed ProTouch™ grips and long-life spring increase leverage and optimize cuts. Precision ground edges on the blades ensure a tight grip on each cut for excellent...- $22.70
- $22.70
- Unit price
- per
-
Vendor: IRWIN
Irwin 233250 Pencil Sharpener, Steel Blade
Integrated emory board for fine point filing. Narrow sharpening angle for broader, more durable point reduced lead breaking. Uses 50% less pencil per sharpening cycle and has 20% harder blade for longer life. Uses 50% less pencil per sharpening cycle 20% harder blade for...- $4.62
- $4.62
- Unit price
- per
-
Vendor: IRWIN
Irwin 25 Welding Clamp, 9 in Jaw Opening, 2-3/4 in W Jaw
For use in welding applications or for holding awkward shapes in place. U-shaped jaws provide enhanced visibility and more working space. Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use. Constructed of high-grade heat-treated alloy steel for maximum toughness and...- $31.63
- $31.63
- Unit price
- per
-
Vendor: IRWIN
Irwin 25130 Circular Saw Blade, 7-1/4 in Dia, 5/8 in Arbor, 24-Teeth, Carbide Cutting Edge, Applicable Materials: Wood
Thin kerf, 2.7 mm, saw blade for corded circular saws. Corrosion resistant coating helps prevent rusting. Precision ground teeth for smooth, accurate cuts, slots for straighter cuts. Alternate top bevel, 18 deg hook angle. Corrosion-resistant coating helps to prevent rust formation Precision ground teeth...- $7.77
- $7.77
- Unit price
- per
-
Vendor: IRWIN
Irwin 274101 Pipe Wrench, 1-1/2 in Jaw, 10 in L, Iron, I-Beam Handle
Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle's wide provides better weight distribution. Constructed from the high-grade cast iron, forged and...- $21.31
- $21.31
- Unit price
- per
-
Vendor: IRWIN
Irwin 274102 Pipe Wrench, 2 in Jaw, 14 in L, Iron, I-Beam Handle
Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle's wide provides better weight distribution. Constructed from the high-grade cast iron, forged and...- $18.29
- $18.29
- Unit price
- per
-
Vendor: IRWIN
Irwin 274103 Pipe Wrench, 2-1/2 in Jaw, 18 in L, Iron, I-Beam Handle
Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle's wide provides better weight distribution. Constructed from the high-grade cast iron, forged and...- $27.33
- $27.33
- Unit price
- per
-
Vendor: IRWIN
Irwin 274104 Pipe Wrench, 3 in Jaw, 24 in L, Iron, I-Beam Handle
Heavy-duty cast iron housing with drop forged jaw that is heat-treated to resist distortion or breakage, hardened teeth, easy spin adjusting nut, hammer head provides flat surface for hammering. I-Beam handle's wide provides better weight distribution. Constructed from the high-grade cast iron, forged and...- $55.28
- $55.28
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016004 Jobber Drill Bit, 1/16 in Dia, 1-7/8 in OAL, Spiral Flute, 1-Flute, 1/16 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $1.40
- $1.40
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016005 Jobber Drill Bit, 5/64 in Dia, 2 in OAL, Spiral Flute, 1-Flute, 5/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $1.70
- $1.70
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016006 Jobber Drill Bit, 3/32 in Dia, 2-1/4 in OAL, Spiral Flute, 1-Flute, 3/32 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $1.40
- $1.40
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016007 Jobber Drill Bit, 7/64 in Dia, 2-5/8 in OAL, Spiral Flute, 1-Flute, 7/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $1.46
- $1.46
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016008 Jobber Drill Bit, 1/8 in Dia, 2-3/4 in OAL, Spiral Flute, 1-Flute, 1/8 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $1.80
- $1.80
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016009 Jobber Drill Bit, 9/64 in Dia, 2-7/8 in OAL, Spiral Flute, 1-Flute, 9/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $1.88
- $1.88
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016010 Jobber Drill Bit, 5/32 in Dia, 3-1/8 in OAL, Spiral Flute, 1-Flute, 5/32 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $2.12
- $2.12
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016011 Jobber Drill Bit, 11/64 in Dia, 3-1/4 in OAL, Spiral Flute, 1-Flute, 11/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $2.06
- $2.06
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016012 Jobber Drill Bit, 3/16 in Dia, 3-1/2 in OAL, Spiral Flute, 1-Flute, 3/16 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $2.28
- $2.28
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016013 Jobber Drill Bit, 13/64 in Dia, 3-5/8 in OAL, Spiral Flute, 1-Flute, 13/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $3.02
- $3.02
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016014 Jobber Drill Bit, 7/32 in Dia, 3-3/4 in OAL, Spiral Flute, 1-Flute, 7/32 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $3.12
- $3.12
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016015 Jobber Drill Bit, 15/64 in Dia, 3-7/8 in OAL, Spiral Flute, 1-Flute, 15/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $3.42
- $3.42
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016016 Jobber Drill Bit, 1/4 in Dia, 4 in OAL, Spiral Flute, 1-Flute, 1/4 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $3.86
- $3.86
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016017 Jobber Drill Bit, 17/64 in Dia, 4-1/8 in OAL, Spiral Flute, 1-Flute, 17/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $4.30
- $4.30
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016018 Jobber Drill Bit, 9/32 in Dia, 4-1/4 in OAL, Spiral Flute, 1-Flute, 9/32 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $4.40
- $4.40
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016020 Jobber Drill Bit, 5/16 in Dia, 4-1/2 in OAL, Spiral Flute, 1-Flute, 5/16 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $5.48
- $5.48
- Unit price
- per
-
Vendor: IRWIN
Irwin 3016021 Jobber Drill Bit, 21/64 in Dia, 4-5/8 in OAL, Spiral Flute, 1-Flute, 21/64 in Dia Shank, Straight Shank
High-speed steel with M-35, 5% cobalt, for higher heat and abrasion resistance; heavy-duty web construction for strength and durability. Split point begins drilling immediately, minimizing bit walk when used in applications such as metal drilling, including heavy-duty abrasive alloy metal drilling on hardened steel...- $6.06
- $6.06
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.