Apollo PEX lead-free dezincification-resistant brass tees are the premier low-cost solution for connections within a PEX piping system. Apollo PEX fittings are suitable for both potable water and hydronic heating systems. Apollo PEX fittings may be used with copper crimp rings, stainless steel pinch...

Oatey® Sure-Vent® 20 DFU capacity air admittance valve's one-way valve allows air to enter the plumbing drainage system when negative pressures develop in the piping system. For use as a secondary vent One size approved to handle up to 3 in vent pipe Opens/closes...

Richmond Water Heater, Inlet Connection Size: 1/2 in, Outlet Connection Size: 3/4 in, BTU Rating: 38,000 Btu, Gas Type: Natural Gas, Tank Capacity: 50 gal, Vent Type: Atmospheric, Vent Size: 61-1/4 in, Water Connection Location: Top, Tank Height: 58-3/8 in, Dimensions: 20-1/2 in Dia,...

IPEX Reducing Coupling, Nominal Size: 3 x 1-1/2 in, Hub Connection, Schedule Rating: SCH 40, PVC, White

Recommended for appliance connections. Corrosion-resistant brass construction with yellow painted aluminum handles. Threads conform to all applicable standards. CSA design Certified and meets ANSI Z21-15. Heavy-duty forged brass body eliminates pinhole leaks commonly associated with cast products Blowout proof stem assembled from the inside...

NDS Deck Drain, 3 in Dia, Styrene, White 3 in S and D HUB

The Danco faucet aerator removal tool is ideal for removing and installing hidden faucet aerators in specially designed faucets. This kit includes four different color coded cache aerator keys that will fit standard, junior, tiny junior and tom thumb size hidden aerators. These cache...

NDS Drain Grate, Grate Opening Size: 1/4 in, Open Surface Area: 10.4 sq-in, Square, 5.88 in L, 2 in H, 5.88 in W, 6 in Dia, HDPE, Green, Foam, Working Pressure: 1 to 60 psi Fits 3 or 4 in sewer and drain pipe...

NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rust-proof and maintenance-free, lightweight and easy to install. Designed for maximum durability to handle light foot traffic. Fits 4 in...

NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rust-proof and maintenance-free, lightweight and easy to install. NDS has a full line of drainage products, fittings and accessories available....

Universal adapters will connect to corrugated, sewer and drain and SCH. 40 pipe in sizes ranging from 3 in to 12 in. Fits 3 in and 4 in, corrugated pipe, sewer and drain pipe, SCH 40 pipe and triple wall pipe. Basin adapters are...

NDS grates are a proven alternative to traditional concrete drains with UV inhibitors are used to prevent fading and cracking from the sun, chemical-resistant, rustproof and maintenance-free, lightweight and easy to install. Flat top structural foam polyolefin atrium grate with UV inhibitor, open surface...

The 1 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Eco-Flo Sewage Pump, Outlet Connection Size: 2 in, 5700 gph, 115 V, 1/2 hp, Suction Lift: 18 ft, Cord Size: 20 ft, Cast Iron/Thermoplastic, Black, Dimensions: 11.2 in L x 9.8 in W x 18.9 in H, Includes: Hardware, Power Cord Heavy-duty cast iron...

Eco-Flo Submersible Utility Pump Kit, 1980 gph, 115 V, 3.3 A, 1/4 hp, Number of Phases: 1, Maximum Head: 25 ft, Cord Size: 10 ft, Temperature Rating: 32 to 104 deg F, Thermoplastic, Dimensions: 13 in L x 13 in W x 10-1/2 in...

Eco-Flo Submersible Sump Pump, 1/2 hp, 4080 gph, Maximum Lift Head: 32 ft, Inlet Connection Size: 1-1/2 in, Outlet Connection Size: 1-1/4 in, 115 V, 6 A, Frequency Rating: 60 Hz, Number of Phases: 1, Cord Length: 10 ft, Temperature Rating: 40 to 104...

Water Source Yard Hydrant Elbow, Nominal Size: 1 in, Barb x MPT Connection, Angle: 90 deg, 120 psi, Operating Temperature: 100 deg F, Brass

Eco-Flo Pitcher Pump Kit, Leather, Includes: Flat Leather Valve and Leather Cup

Eco-Flo Pool Utility Pump, 115 V, 1/4 hp, 1980 gph, Thermoplastic, Dimensions: 9-1/4 in L x 14 in W x 13-1/2 in H Will drain from flat surfaces down to 1/8 in Continuous duty, efficient 115 V PSC motor for lower carbon footprint Oil...

The 1 in barbed x 3/4 in male NPT x 1 in barbed brass hydrant tee allows multiple PVC pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. This hydrant tee meets federal low lead regulations.

Water Source Coupling, Nominal Size: 1/2 in, Barb Insert Connection, Brass

Water Source Check Valve, Nominal Size: 1-1/2 in, Body Material: Brass, 200 psi, Suitable for: Jet, Submersible and Centrifugal Pumps

The 3/4 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

The pitcher pump is made with cast iron for optimum strength. It has a rugged design for a long service life. This pump has a maximum lift of 25 ft. No lead Pitcher spout designed to hold pail for easy operation

Eco-Flo Sump Pump, Outlet Connection Size: 1-1/2 in, 3600 gph, 115 V, 3.5 A, Frequency Rating: 60 Hz, 1/3 hp, Suction Lift: 25 ft, Cord Size: 10 ft, Temperature Rating: 40 to 104 deg F, Aluminum/Thermoplastic, Dimensions: 9-5/8 in L x 9-5/8 in W...

Eco-Flo Well Point, MPT Connection, Pipe Size: 2 x 36 in, Dimensions: 3-1/2 in Dia 80 GZ stainless steel mesh screen 30 in screen 80 mesh

The 3/4 in barbed x 3/4 in male NPT x 3/4 in barbed brass hydrant tee allows multiple flexible poly pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. The hydrant tee meets all federal low lead...

The 1 in male adapter with the rope loop connects flexible poly pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 2 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.

The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and/or a snifter valve. Solid brass design meets federal low-lead regulations

Eco-Flo Control Center Check Valve, 1-1/4 in Connection, Body Material: Brass

The 1 in two-hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. Vertical or horizontal application prevents back flow to the...

The 1 in pitless adapter can be used to connect submersible pump piping to a horizontal supply line. The 2 pieces of the pitless adapter separate so you can lift the pump easily. This pitless adapter has a brass body with Buna-N O-rings and...

The 2 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

The 20/40 psi pressure switch signals the pump to start when the water system drops to a preset (e.g. 20 psi) and stop at high-pressure mark (e.g. 40 psi). This switch is to be used with submersible well pumps or as a replacement switch....

The 1/2 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 30/50 psi low pressure switch signals the pump to start when the water system drops to a preset low pressure (e.g. 30 psi) and stop at high-pressure mark (e.g. 50 psi). If the pressure drops rapidly, the switch will automatically shut-off the pump....

Water Source Flush Pipe Coupling, Nominal Size: 2 in, Slip Connection, Schedule Rating: SCH 40, PVC

Water Source Foot Valve, 1-1/2 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

Water Source Check Valve, Nominal Size: 2 in, Media: Cold Water, Gas, Oil, Body Material: Brass, 200 psi

The stainless steel well point drives into all types of soil. They are engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three step bonding design which prevents the screen from peeling back....

Water Source Air Volume Control, Specifications: 3/8 in MPT Connection, Suitable for: 120 gal Water Tank

Water Source Cable Guard, Suitable for: 4, 5, 6 in Well Casings The submersible cable guard prevents submersible power cables from rubbing in a well casing, cable guard is constructed of durable plastic material Easy-to-use, snap-in wire guide The cable guard is constructed of...

The 1-1/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 3/4 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

Water Source Pressure Switch, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Working Pressure: 20 to 40 psi

Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in

Water Source Pressure Switch, 115/230 V, Dimensions: 3 in L x 4 in W x 4 in H, Steel Body, Gray, 30, 50 psi Working, Suitable for: Submersible Well or Jet Pumps

Water Source Flush Pipe Coupling, Nominal Size: 1-1/4 in, Slip Connection, Schedule Rating: SCH 40, PVC