-
Vendor: PRO-FIT
ProFIT 0029098 Concrete Nail, Fluted Concrete Nails, 4D, 1-1/2 in L, Steel, Brite, Flat Head, Fluted Shank, 1 lb
ProFIT Concrete Nail, Heat Treated, 4D, 1-1/2 in L, Galvanized, Head Type: Flat, Shank Type: Spiral, Package Quantity: 1 lb, Head Size: 11/32 in, Nails per Pound: 128- $8.33
- $8.33
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0132138 Hand Drive Roofing Nail, 2 in L, Flat Head, 11 ga, 1 lb
ProFIT Hand Drive Roofing Nail, 7/16 in Head, Flat Head, Round, Smooth Shank, Diamond Point, 2 in Length, 11 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 136, Package Weight: 1 lb Large flat head for greater holding power Heavy-gauge, round, smooth shank provides greater...- $5.50
- $5.50
- Unit price
- per
-
Vendor: DEWALT
DEWALT DCA16250 Series Finish Nail, Glue Collation, 2-1/2 in L, 16 Gauge, Steel, Suitable for: DC618K Finish Nailer
DEWALT Finish Nail, Collation Type: Glue, Collation Angle: 20 deg, Head Diameter: 0.113 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 16, 1/16 in Dia, 2-1/2 in L, Steel, Galvanized, Suitable for: DC618K Finish Nailer- $47.93
- $47.93
- Unit price
- per
-
Vendor: MAZE NAILS
Maze HT150-112 Trim Nail, Hand Drive, 1-1/2 in L, Carbon Steel, Smooth Shank, Black, 5 lb
These slim diameter hardwood trim nails are made from a HCS wire to ensure good driving into oak, birch, walnut and other hardwoods. There are many more nails per pound than with ordinary finish nails so they cost less to use and there are...- $8.36
- $8.36
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0600370 Series Framing Nail, Paper Tape Collation, 3 in L, 11 Gauge, Steel, Galvanized, Round Head, Smooth Shank
Use for general rough framing and construction.- $69.81
- $69.81
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0603154 Finish Nail, Glue Collation, 2-1/2 in L, 15, Steel, Brad Head, Smooth Shank
Use for interior trim and moldings.- $14.32
- $14.32
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0010198 Deck Nail, 16D, 3-1/2 in L, Steel, Hot-Dipped Galvanized, Flat Head, Spiral Shank, 1 lb
ProFIT Deck Nail, 16D, 3-1/2 in L, Steel, Hot-Dipped Galvanized, Head Type: Flat, Shank Type: Spiral, Package Quantity: 1 lb, Head Size: 11/32 in, Nails per Pound: 59, Point Type: Diamond Thin, mechanically deformed spiral shank helps reduce splitting without bending Hot-dipped galvanized to...- $9.40
- $9.40
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 3078155 Square Cut Nail, Concrete Cut Nails, 8D, 2-1/2 in L, Steel, Hot-Dipped Galvanized, Rectangular Head, 5 lb
Masonry nails are hardened nails designed to be driven into concrete or the mortar used to hold together bricks or cement blocks. This rigidity also lends masonry nails to a wide variety of installations ranging from attaching plywood subfloor to securing carpet tack strips....- $30.07
- $30.07
- Unit price
- per
-
Vendor: SENCO
Senco DA23EPBN Finish Nail, 2-1/4 in L, 15, Steel, Bright Basic, Brad Head, Smooth Shank
Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 2-1/4 in L, Steel, Bright Basic, Suitable for: SFN40, SFN30, SFN1+, F15, FinishPro 35, FinishPro 41XP Nailers Fewer...- $54.12
- $54.12
- Unit price
- per
-
Vendor: SENCO
A100509-23X1/2 EG MICRO PIN
NAIL PIN MC HDLS EG 23GAX1/2IN- $19.12
- $19.12
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch DA-1540 Finish Nail, 2-1/2 in L, 15 Gauge, Steel, Coated, Smooth Shank
Bostitch Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 0.072 in, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 2-1/2 in L, Steel, Coated, Suitable for: DeWalt D51275K DUO-FAST, DAFN-6480, DAFN-6432, Porter Cable DA250, DA250A, DA250B, Senco SFN30, DFN40, SFN1, A25FN...- $100.84
- $100.84
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T18N125FNB Finish Nail, 1-1/4 in L, 18 Gauge, 316 Stainless Steel, T-Shaped Head, Smooth Shank
Simpson Strong-Tie Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Type: T-Shaped, Shank Type: Smooth, Material Gauge: 18, 1-1/4 in L, 316 Stainless Steel, Suitable for: Bosch BNS200-18, Bostitch BT1855K, SB-1850BN, SB-2IN1, GBT1850K, DeWalt DC51236K, D51238K, SureShot 4450, SureShot 4450 ST, Grip-Rite GRTBN125,...- $33.78
- $33.78
- Unit price
- per
-
Vendor: SENCO
Senco Q25BAB Wire Staple, 7/16 in W Crown, 2-1/2 in L Leg, 15, Galvanized
For sheathing, subflooring, roof decking, subcomponents lathing, window units cedar shingles, furring Fascia & Soffits, vinyl siding. Fits Senco SNS45XP, SNS40, SNS44XP, SNS41, SNS50, M2+, M2, M1, DeWALT® D51430, Max TA551, Hitachi N500AC, 5008AA/AB, Porter Cable MS200, Others Atro Panta 100, DuoFast DS-7664, Fasco...- $179.33
- $179.33
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch RH-S10D120HDG Series Framing Nail, Plastic Strip Collation, Galvanized, Smooth Shank, 4000/PK, 0.12 in Diameter
Bostitch Framing Nail, Collation Type: Plastic Strip, Collation Angle: 21 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.12 in Dia, 3 in L, Steel, Galvanized, Suitable for: N88RH, F21PL, F21PL2 Pneumatic Nailer, DeWalt D51845, DUOFAST CN350B, Hitachi...- $201.14
- $201.14
- Unit price
- per
-
Vendor: SENCO
Senco KD28APBSN Series Collated Nail, Plastic Strip Collation, 3-1/4 in L, Steel, Bright Basic, Full Round Head
Senco Collated Nail, Collation Type: Plastic Strip, Collation Angle: 20 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3-1/4 in L, Steel, Bright Basic, Suitable for: FP702XP, SN952XP, FP752XP Framing Nailer- $84.67
- $84.67
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0621090 Crown Staple, 7/16 in W Crown, 1-1/2 in L Leg, 16 Gauge, Electro-Galvanized, 10000/PK
Fits Duo-Fast and Paslode pneumatic staplers.- $99.40
- $99.40
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0063198 Casing Nail, 16D, 3-1/2 in L, Carbon Steel, Hot-Dipped Galvanized, Brad Head, Round Shank, 1 lb
Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT® finish nails come in three basic styles finish, casing and hardened trim. They are used to set door and window frames, apply trim and in...- $9.38
- $9.38
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch CAPPAK-5M Cap Staple, 5/16 in W Crown, 1 in L Leg, 18 Gauge, Steel, Electro-Galvanized, 5000/PK
1 in plastic Bostitch caps & 5/16th crown, 18 ga 1 in staples eliminate pull-through when installing felt, house wrap and foam board insulation. For use with Bostitch cap stapler (273.5660) fits Bostitch tools SB150SLBC-1. Caps & staples eliminate pull-through when installing felt, house...- $160.45
- $160.45
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0600200 Framing Nail, 3-1/2 in L, Steel, Bright, Clipped Head, Smooth Shank
Use for general rough framing and construction.- $76.22
- $76.22
- Unit price
- per
-
Vendor: SENCO
Senco KD27APBSN Series Collated Nail, Plastic Strip Collation, 3 in L, Steel, Bright Basic
Senco Collated Nail, Collation Type: Plastic Strip, Collation Angle: 20 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3 in L, Steel, Bright Basic, Suitable for: Model SN952XP, FP752XP, FP325FRHXP, FP702XP Framing Nailer- $83.80
- $83.80
- Unit price
- per
-
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S10PTD1 Deck Nail, 10D, 3 in L, 304 Stainless Steel, Bright, Full Round Head, Annular Ring Shank
Annular ring threads provide secure attachment of cedar, redwood and other stable decking materials to deck joists and preclude nail head popping. Slender shanks permit nailing at board ends without splitting. Small unobtrusive checker pattern heads blend with wood grain and diffract sunlight. Note,...- $17.08
- $17.08
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S16N150N17 Collated Crown Staple, 7/16 in W Crown, 1-1/2 in L Leg, 16 Gauge, Stainless Steel
Fits Bostitch 650S5, Hitachi N5008AA & A1, N5008AB & N5008AC, Fasco G, Max TA551/16-11 (1 in- 2 in), Porter Cable CMS200 & MS200, SENCO M1 (3/4 to 1-3/4 in), M2+ (1-1/4 to 2 in), SNS45 (1 to 2 in), SNS50 (1-1/4 to 2 in),...- $179.58
- $179.58
- Unit price
- per
-
Vendor: SENCO
Senco KD28ASBF Nail, 3-1/4 in L, Steel, Sencote, Full Round Head, Smooth Shank
Senco Nail, Collation Type: Wire Weld Coil, Collation Angle: 15 deg, Head Diameter: 0.131 in, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 3-1/4 in L, Gray, Steel, Sencote, Suitable for: PAL100XP, PAL130XP, SFN40, SFN2B Pneumatic Nailer- $130.25
- $130.25
- Unit price
- per
-
Vendor: SENCO
Senco GD24APBSN Collated Nail, Plastic Strip Collation, 2-3/8 in L, Steel, Bright Basic, Full Round Head, Smooth Shank
Senco Collated Nail, Collation Type: Plastic Strip, Collation Angle: 20 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, 0.113 in Dia, 2-3/8 in L, Steel, Bright Basic, Suitable for: Model SN952XP, FP752XP, FP325FRHXP, FP702XP Framing Nailer- $95.29
- $95.29
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0057098 Box Nail, 4D, 1-1/2 in L, Steel, Hot-Dipped Galvanized, Flat Head, Round, Smooth Shank, 1 lb
ProFIT Box Nail, 4D, 1-1/2 in L, Steel, Hot-Dipped Galvanized, Head Type: Flat, Shank Type: Round, Smooth, Package Quantity: 1 lb, Head Size: 7/32 in, Nails per Pound: 374, Point Type: Diamond, Shank Size: 7/64 in- $8.06
- $8.06
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S10PTD5 Deck Nail, 10D, 3 in L, 304 Stainless Steel, Bright, Full Round Head, Annular Ring Shank
Annular ring threads provide secure attachment of cedar, redwood and other stable decking materials to deck joists and preclude nail head popping. Slender shanks permit nailing at board ends without splitting. Small unobtrusive checker pattern heads blend with wood grain and diffract sunlight. Note,...- $59.80
- $59.80
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0065199 Sinker Nail, 16D, 3-1/4 in L, Vinyl-Coated, Flat Countersunk Head, Round, Smooth Shank, 25 lb
ProFIT Sinker Nail, 16D, 3-1/4 in L, Vinyl-Coated, Head Type: Flat Countersunk, Shank Type: Round, Smooth, Package Quantity: 25 lb, Head Size: 11/32 in, Nails per Pound: 62, Point Type: Diamond- $48.91
- $48.91
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BT1303B-1M Nail, 3/4 in L, 18 Gauge, Steel, Galvanized, Brad Head, Smooth Shank, 1000/PK
Bostitch Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 2 mm, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 18, 0.0475 in Dia, 3/4 in L, Galvanized, Steel, Suitable for: BTFP12233, SB-1842BN, SB-2IN1, SB-1850BN, BT35B, BT200K-2, BT125K-2, GBT1850K Nailers- $7.13
- $7.13
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0053138 Common Nail, 6D, 2 in L, Steel, Brite, Flat Head, Round, Smooth Shank, 1 lb
Popular for general rough framing and construction. Brite finish to enhance corrosion resistance- $5.69
- $5.69
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0616870 Series Framing Nail, Wire Weld Collation, 3 in L, 11 Gauge, Steel, Galvanized, Round Head, Smooth Shank
Use for general rough framing and construction.- $94.83
- $94.83
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0132119 Hand Drive Roofing Nail, 1-3/4 in L, Flat Head, 11 ga, Steel, 25 lb
ProFIT Hand Drive Roofing Nail, 7/16 in Head, Flat Head, Round, Smooth Shank, Diamond Point, 1-3/4 in Length, 11 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 155, Package Weight: 25 lb Large flat head for greater holding power Heavy-gauge, round, smooth shank provides greater...- $45.83
- $45.83
- Unit price
- per
-
Vendor: DEWALT
DEWALT DCA16150 Series Finish Nail, Glue Collation, 1-1/2 in L, 16 Gauge, Suitable for: DC618K Finish Nailer
DEWALT Finish Nail, Collation Type: Glue, Collation Angle: 20 deg, Head Diameter: 0.113 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 16, 1/16 in Dia, 1-1/2 in L, Steel, Galvanized, Suitable for: DC618K Finish Nailer- $39.42
- $39.42
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch SB16-1.25-1M Finish Nail, 1-1/4 in L, 16 Gauge, Steel, Coated, Round Head, Smooth Shank
Bostitch Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 1/16 in, Head Type: Round, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 16, 1-1/4 in L, Steel, Coated, Suitable for: GFN1664K, FN16250K, SB-1664FN, FN1664K Nailers- $19.07
- $19.07
- Unit price
- per
-
Vendor: SENCO
Senco P21BAB Wire Staple, 1 in W Crown, 2 in L Leg, 16, Galvanized Steel
Fasteners for ACQ pressure treated lumber. Fits Senco PW200, PW150, PW150R, PW, PW-2 in, PW-R, SPS, MW, Duofast RS-1748, KW-1748, Hitachi N3824A, Fasco F3 SNW-38CT R, F30 SNW-50 R and Halstead HSW14.- $81.55
- $81.55
- Unit price
- per
-
Vendor: ORGILL BULK NAILS
ProFIT 0132172 Hand Drive Roofing Nail, 3 in L, Flat Head, 11 ga, Steel, 50 lb
ProFIT Hand Drive Roofing Nail, 7/16 in Head, Flat Head, Round, Smooth Shank, Diamond Point, 3 in Length, 11 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 93, Package Weight: 50 lb Large flat head for greater holding power Heavy-gauge, round, smooth shank provides greater...- $69.48
- $69.48
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0010199 Deck Nail, 16D, 3-1/2 in L, Steel, Hot-Dipped Galvanized, Flat Head, Spiral Shank, 25 lb
ProFIT Deck Nail, 16D, 3-1/2 in L, Steel, Hot-Dipped Galvanized, Head Type: Flat, Shank Type: Spiral, Package Quantity: 25 lb, Head Size: 11/32 in, Nails per Pound: 59, Point Type: Diamond- $98.63
- $98.63
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch C6R99BCG Framing Nail, 2 in L, Thickcoat, Ring Shank
Bostitch Framing Nail, Collation Angle: 15 deg, Point Type: Blunt Chisel, Shank Type: Ring, 0.099 in Dia, 2 in L, Thickcoat, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi NV83A, Makita AN901, Max 890C, Paslode F275C,P275C, F325C, P325C, 5300C,...- $111.98
- $111.98
- Unit price
- per
-
Vendor: SENCO
Senco DA21EABN Finish Nail, 2 in L, 15, Galvanized Steel, Brad Head, Smooth Shank
Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 2 in L, Galvanized Steel, Suitable for: SFN40, SFN30, SFN1+, F15, FinishPro 35, FinishPro 41XP Nailers- $63.81
- $63.81
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0069138 Hand Drive Roofing Nail, 2 in L, Flat Head, 11 ga, Steel, 1 lb
ProFIT Hand Drive Roofing Nail, 7/16 in Head, Flat Head, Round, Smooth Shank, Diamond Point, 2 in Length, 11 ga, Steel, Galvanized, Approximate Nails per Pound: 120, Package Weight: 1 lb Large flat head for greater holding power Heavy-gauge, round, smooth shank provides greater...- $7.46
- $7.46
- Unit price
- per
-
Vendor: SENCO
Senco C06BAAP Wire Staple, 3/8 in W Crown, 3/8 in L Leg, 22, Galvanized Steel
Applications include casing, finish, trim, molding, base, cabinets.- $61.42
- $61.42
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0096078 Joist Hanger Nail, 3D Penny, 1-1/4 in L, Flat Head, 11 ga Gauge, Steel, Galvanized
Use for metal hangers to wood. Hot-dipped galvanized for exterior use. Meets ASTM A-153. Smooth, heavy shank provides increased holding power Hot-dipped galvanized to enhance corrosion resistance- $5.53
- $5.53
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie S410ARN5 Roofing Nail, 4D Penny, 1-1/2 in L, Full Round Head, 10 ga Gauge, Stainless Steel
The Simpson Strong-Tie® roofing nail-annular ring shank was designed to optimize holding power, while incorporating higher levels of corrosion resistance. Its large flat head provides extra bearing surface to firmly secure roofing material and its annular ring shank increases withdrawal resistance. A variety of...- $62.86
- $62.86
- Unit price
- per
-
Vendor: SENCO
Senco HC27APBX Series Collated Nail, Paper Tape Collation, 3 in L, Steel, Bright Basic, Clipped Head
Senco Collated Nail, Collation Type: Paper Tape, Collation Angle: 34 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.12 in Dia, 3 in L, Steel, Bright Basic, Suitable for: Model SFN40, SFN2B Pneumatic Nailer- $53.72
- $53.72
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0051038 Poultry Net Staple, 3/4 in L, 1 lb, 3/16 in W Crown, 13
Used to attach poultry netting to wood. Size of 13 ga. 3/16 in head.- $7.21
- $7.21
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch C10P120DG Framing Nail, 3 in L, 11 Gauge, Steel, Thickcoat, Round Head, Smooth Shank
Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Head Type: Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.12 in Dia, 3 in L, Steel, Thickcoat, Suitable for: N80CB, N86C, N89C, N100C, N100CPP, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi...- $158.30
- $158.30
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch C4R80BDG Siding Nail, 1-1/2 in L, Steel, Thickcoat, Ring Shank
Bostitch Siding Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Point Type: Blunt Diamond, Shank Type: Ring, 0.08 in Dia, 1-1/2 in L, Steel, Thickcoat, Suitable for: N63CP, N64C, N66C, N66BC Pneumatic Nailer, Hitachi NV65AH, Max CN565, Makita AN611, Porter-Cable COIL200, COIL250 Tools...- $108.55
- $108.55
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0053178 Common Nail, 10D, 3 in L, Steel, Bright, Smooth Shank, 1 lb
ProFIT Common Nail, 10D, 3 in L, Steel, Bright, Shank Type: Smooth, Package Quantity: 1 lb, Head Size: 5/16 in, Nails per Pound: 66, Shank Size: 0.148 in- $5.69
- $5.69
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0162138 Finishing Nail, 6D, 2 in L, Carbon Steel, Electro-Galvanized, Brad Head, Round Shank, 1 lb
Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT® finish nails come in three basic styles finish, casing and hardened trim. They are used to set door and window frames, apply trim and in...- $7.06
- $7.06
- Unit price
- per
-
Vendor: SENCO
Senco DA19EABN Finish Nail, 1-3/4 in L, 15, Galvanized Steel, Brad Head, Smooth Shank
Senco Finish Nail, Collation Type: Glue, Collation Angle: 34 deg, Head Diameter: 0.072 in, Head Type: Brad, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 15, 1-3/4 in L, Galvanized Steel, Suitable for: SFN40, SFN30, SFN1+, F15, FinishPro 35, FinishPro 41XP Nailers- $62.17
- $62.17
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.