Sea Tech® 35 Series products are designed and manufactured to be trouble-free for many years of service life. 35 Series products are designed and manufactured in polysulfone, a high-performance thermal plastic material. 35 Series products are available in standard imperial inch sizes and interconnect...

Features heavy pattern rough brass, 1-piece O-ring bonnet and coated wheel handle.

Designed to prevent water line freeze up. Ready to install, grounded cord and plug, thermostat controlled with pilot light. UL and CSA approved. Install on pipes, then wrap with pipe insulation. Pipe heating cable designed to prevent water line freeze up Ready to install...

The ProSource hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing, and a...

Anderson Metals Pipe Tee, Nominal Size: 3/8 in, FIPT Connection, 200 psi, Operating Temperature: 150 deg F, Brass, Red

Charlotte Pipe Pipe, Bell End, Nominal Size: 2 in, 2-3/8 in Dia Outside, Wall Thickness: 0.154 in, 20 ft L, 280 psi, Operating Temperature: 140 deg F, Schedule Rating: SCH 40, PVC, White

BrassCraft® 1/2 in FIP inlet x 3/8 in OD compression x 3/8 in OD compression dual outlet, dual shut-off multi-turn angle valve controls water flow to household plumbing fixtures. The angle valve is most often used where the water pipe enters the room from...

Charlotte Pipe Pipe, Bell End, 4 in Nominal, 4.215 in OD, 0.075 in Wall Thickness, 10 ft Length, 140 deg F Operating, PVC DWV, White

Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID.

arrowhead Heavy-Duty Hose Bibb, 1/2 x 3/4 in Connection, MPT x MHT Connection, 8 to 9 gpm, 125 psi, Actuator Type: T-Handle, Temperature Rating: 180 deg F, Body Material: Red Brass, Dimensions: 3-1/2 in H x 1-1/4 in W x 4 in D

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, NPT Connection, 890 psi, Operating Temperature: 250 deg F, Brass, 5 in L, Suitable for: Brass, Copper and Iron Pipes

Lightweight construction, suitable for air, water and spray applications, contractor-grade, for use with hose barbs and clamps. Non-marking abrasion-resistant cover

Our channel-flow pipe is used as the distribution pipe in conventional gravel-filled leach fields.

IPEX high-performance vinyl systems are designed to meet the temperature, pressure and size requirements of piping systems used in chemical processes and other industrial applications. They feature outstanding resistance to photodegradation, creep stress and immunity to oxidation and are exceptionally suited for use with...

IPEX Sewer Increaser Coupling with Stop, Nominal Size: 4 x 3 in, Hub Connection, PVC, White

Canplas Pipe Adapter, Nominal Size: 3 in, FNPT x Hub Connection, Schedule Rating: SCH 40, ABS, Black

FDA-grade, suitable for use with liquid transfer, pneumatic and vacuum line, for use with hose barbs and clamps. Higher pressure ratings

TEE COMPRESSION PVC 1 INCH

For use with water or oil. multi-turn operation, 3/4 in hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. The valves are precisely engineered for outstanding service, long life and reliable performance These valves offer...

For use with water or oil. multi-turn operation, 3/4 in hose thread outlet, large flow area, threaded ends comply with ANSI B1.20.1, hose threads comply with ANSI B1.20.7. The valves are precisely engineered for outstanding service, long life and reliable performance These valves offer...

Easy quarter turn On/Off operation regulates water flow from a trickle to wide open. Compact, low-lead compliant, operates easily for long life. Large flow rate for use as any general-purpose hose connection outlet for external water service. 60% copper alloy brass construction with chrome-plated...

Elkhart Products 118 Pipe Reducer, Nominal Size: 1-1/4 x 3/4 in, FTG x Sweat Connection

Boshart Plumb Eeze, Nominal Size: 1-1/4 in, Operating Temperature: 73 deg F, Polyethylene, Gray, 7.87 in L

Countersunk and tapped.

Boshart Pipe Plug, Nominal Size: 1-1/2 in, Insert Connection, Polypropylene

Used to change direction. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints.

Used to change direction. Adapts to standard female pipe threads. Teflon thread tape is recommended for threaded joints.

Elkhart Products 111R Reducing Pipe Tee, Nominal Size: 2 x 2 x 1 in, Sweat Connection, Copper

Abbott Rubber Hose Coupling, Nominal Size: 3 in, MNPT Connection, Die-Cast Aluminum

BrassCraft's Safety+PLUS gas connector combines patented excess flow technology with the advanced corrosion resistance, to provide a safer gas connector for your home and family. In the event of a gas line rupture or disconnect, the Safety+PLUS excess flow valve (EFV) restricts gas flow...

Three-piece construction, nut, sleeve and body. Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. Easy to disassemble, no flaring tool required. Primary uses water, gasoline, oil and vacuum lines. UPC individually bagged.

High-quality polyethylene pipe wrap for industrial use. Superior all-weather moisture proof pipe protection.

Kit contains #8825 brass connector, #8826 brass links (Pair), #8847 brass packing nut, #8839 Buna-N "O" rings (Pair), #8842 plunger (one piece), #8301 stainless steel lock nut, #8836 fulcrum bolt and #8837 square head set screw. Low lead

Lay flat PVC contractor-grade hose for pump discharge and agricultural applications. Designed for open end moderate water discharge service Strong, lightweight and flexible lay flat hose for construction site service Rolls up flat for easy storage Mildew-resistant Cam-Lock Quick Connect

For 1/2 in ID (5/8 in OD) corrugated. Recommended for gas range connectors. Use with PlumbShop SC or RSC Series connectors. 1/2 in MIP end tapped 3/8 in FIP thread, 3/4 in MIP tapped 1/2 in FIP.

This quick-connect female swivel elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS x 1/2 in NPSM fitting rotates fully under pressure, connects to...

Our channel-flow pipe is used as the distribution pipe in conventional gravel-filled leach fields.

Streamline® copper tube sets the standard for quality, consistency and service in the plumbing industries. With a full line of copper tube products to support most all plumbing supply and DWV applications, Streamline® copper tube is available in all common types including K-type, L-type,...

Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID....

CSA certified up to 0.05 psig, -40 to 150 deg operating temperature.

BrassCraft's ProCoat stainless steel gas connector is engineered with added safety in mind. The proprietary polymer coating is designed to withstand prolonged exposure to harsh household chemicals, UV rays and salt. ProCoat is applied to the corrugated stainless steel connector using advanced powder-coat technology....

UPC individually bagged.

Canplas Reducing Combination Tee Pipe Wye, Nominal Size: 2 x 2 x 1-1/2 in, Hub Connection, ABS, Black

The ProSource hose clamps are multi purpose clamps used to seal hoses or pipes onto fittings. The hose clamps are the ideal choice for all forms of projects and application requiring hose clamps. It's designed with a stainless steel band and housing, and a...

Used for capping off PEX fittings. Bar coded.

Connector with nickel plated brass nuts and nitrile rubber sealing washer. Complies with no-lead laws. Dimension of 3/4 in FIP x 3/4 in FIP. Nickel plated brass nuts Nitrile rubber sealing washer

This 3/4 in lead-free hot water control valve is designed for installation on water heating equipment to provide tempered water to point-of-use fixtures and is ideal for radiant heat applications. The double throttling design combines hot and cold water control for a sensitive response...

Pacer's S Series self-priming centrifugal pumps are light-weight and chemically resistant for general service on water, salt water, waste water, mild acids and bases. This is our most popular pump across multiple markets. They feature stainless steel internal fasteners, Viton®, EPDM or Buna O-ring...

Polyvinyl chloride foam with aluminum shell that reflects heat. Adhesive closed-cell foam insulates and protects.

Anderson Metals Tube Elbow, Nominal Size: 1/4 x 3/8 in, Angle: 90 deg, 300 psi, Brass