The 1 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Eco-Flo Well Point, MPT Connection, Pipe Size: 2 x 36 in, Dimensions: 3-1/2 in Dia 80 GZ stainless steel mesh screen 30 in screen 80 mesh

Water Source Yard Hydrant Elbow, Nominal Size: 1 in, Barb x MPT Connection, Angle: 90 deg, 120 psi, Operating Temperature: 100 deg F, Brass

Eco-Flo Pool Utility Pump, 115 V, 1/4 hp, 1980 gph, Thermoplastic, Dimensions: 9-1/4 in L x 14 in W x 13-1/2 in H Will drain from flat surfaces down to 1/8 in Continuous duty, efficient 115 V PSC motor for lower carbon footprint Oil...

Eco-Flo Sewage Pump, Outlet Connection Size: 2 in, 5700 gph, 115 V, 1/2 hp, Suction Lift: 18 ft, Cord Size: 20 ft, Cast Iron/Thermoplastic, Black, Dimensions: 11.2 in L x 9.8 in W x 18.9 in H, Includes: Hardware, Power Cord Heavy-duty cast iron...

Eco-Flo Pitcher Pump Kit, Leather, Includes: Flat Leather Valve and Leather Cup

The 3/4 in barbed x 3/4 in male NPT x 3/4 in barbed brass hydrant tee allows multiple flexible poly pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. The hydrant tee meets all federal low lead...

Eco-Flo Submersible Sump Pump, 1/2 hp, 4080 gph, Maximum Lift Head: 32 ft, Inlet Connection Size: 1-1/2 in, Outlet Connection Size: 1-1/4 in, 115 V, 6 A, Frequency Rating: 60 Hz, Number of Phases: 1, Cord Length: 10 ft, Temperature Rating: 40 to 104...

Eco-Flo Submersible Utility Pump Kit, 1980 gph, 115 V, 3.3 A, 1/4 hp, Number of Phases: 1, Maximum Head: 25 ft, Cord Size: 10 ft, Temperature Rating: 32 to 104 deg F, Thermoplastic, Dimensions: 13 in L x 13 in W x 10-1/2 in...

The pitcher pump is made with cast iron for optimum strength. It has a rugged design for a long service life. This pump has a maximum lift of 25 ft. No lead Pitcher spout designed to hold pail for easy operation

Eco-Flo Sump Pump, Outlet Connection Size: 1-1/2 in, 3600 gph, 115 V, 3.5 A, Frequency Rating: 60 Hz, 1/3 hp, Suction Lift: 25 ft, Cord Size: 10 ft, Temperature Rating: 40 to 104 deg F, Aluminum/Thermoplastic, Dimensions: 9-5/8 in L x 9-5/8 in W...

The 13 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and/or a snifter valve. Solid brass design meets federal low-lead regulations

Water Source Coupling, Nominal Size: 1/2 in, Barb Insert Connection, Brass

The 2 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.

The 1 in barbed x 3/4 in male NPT x 1 in barbed brass hydrant tee allows multiple PVC pipe lines to be connected to the hydrant. This piece makes hydrant connection quick and easy. This hydrant tee meets federal low lead regulations.

Water Source Check Valve, 1-1/2 in Nominal, Media: Cold Water, Gas, Oil, Brass Body, 200 psi Pressure, Suitable for: Jet, Submersible and Centrifugal Pumps

The 1 in male adapter with the rope loop connects flexible poly pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

The 3/4 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

The 1-1/4 in two hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. 1/8 in female tapping for an air valve...

Water Source Check Valve, Nominal Size: 2 in, Media: Cold Water, Gas, Oil, Body Material: Brass, 200 psi

The 1 in two-hole brass control center check valve gives full engagement of accessories without reducing water flow or poppet operation. This piece is mainly used where space is limited. It is easy to install. Vertical or horizontal application prevents back flow to the...

The 1 in pitless adapter can be used to connect submersible pump piping to a horizontal supply line. The 2 pieces of the pitless adapter separate so you can lift the pump easily. This pitless adapter has a brass body with Buna-N O-rings and...

Water Source Foot Valve, 1-1/2 in Connection, 200 psi, Body Material: Brass, Strainer Material: Brass

Water Source Air Volume Control, Specifications: 3/8 in MPT Connection, Suitable for: 120 gal Water Tank

Water Source Flush Pipe Coupling, Nominal Size: 2 in, Slip Connection, Schedule Rating: SCH 40, PVC

The 30/50 psi low pressure switch signals the pump to start when the water system drops to a preset low pressure (e.g. 30 psi) and stop at high-pressure mark (e.g. 50 psi). If the pressure drops rapidly, the switch will automatically shut-off the pump....

The 2 in foot valve holds prime in pump while filtering water from lakes, wells, ponds etc. Long-lasting, spring loaded foot valves are manufactured with high-quality brass. Features include perforated brass screen strainer, exclusive design poppet, stem guide and wide channel for maximum flow....

The 20/40 psi pressure switch signals the pump to start when the water system drops to a preset (e.g. 20 psi) and stop at high-pressure mark (e.g. 40 psi). This switch is to be used with submersible well pumps or as a replacement switch....

The stainless steel well point drives into all types of soil. They are engineered to provide an ideal combination of easy driving, effective sand control, corrosion resistance and strength. There is also a three step bonding design which prevents the screen from peeling back....

The pitcher pump leathers are used in pitcher pumps. Prime the pump before each use. When wet, leathers will expand to create an air tight seal.

The 1/2 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Water Source Flat Valve, Leather, Dimensions: 3-1/2 x 1-7/8 in

Water Source Pressure Switch, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Working Pressure: 20 to 40 psi

The 1-1/4 in brass male insert adapter connects PVC pipe to the barbed end and a threaded iron pipe to the female end. To minimize leaks, make sure all connections are tight. Use thread tape on all threaded connections.

Water Source Flush Pipe Coupling, Nominal Size: 1-1/4 in, Slip Connection, Schedule Rating: SCH 40, PVC

The brass insert coupling connects two PVC pipes together. It has 3/4 in insert x 3/4 in insert. Use with clamps.

Water Source Pressure Switch, 115/230 V, Dimensions: 3 in L x 4 in W x 4 in H, Steel Body, Gray, 30, 50 psi Working, Suitable for: Submersible Well or Jet Pumps

The pressure gauge measures water pressure in the pressure tank. It has a 1/8 in back connection. Dark numbers are easy to read on the gauge. Measures water pressure in well tank

The 10 in brass tank tee connects the water line from the pump to the pressure tank. 1/4 and 1/2 in ports accept a pressure switch, a pressure gauge, a relief valve and a snifter valve. Solid brass design meets federal low-lead regulations

Water Source Pressure Switch, 115/230 V, Dimensions: 3.95 in L x 3.75 in W x 3.95 in H, Steel Body, Gray, 40, 60 psi Working, Suitable for: Submersible Well or Jet Pumps

The 1 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

The 3/4 in barbed x 3/4 in male NPT thread hydrant elbow is designed for ground hydrant installations. It connects the yard hydrant to flexible plastic pipe. It is easy to install. It connects the yard hydrant to flexible plastic pipe

Water Source Cable Guard, Suitable for: 4, 5, 6 in Well Casings The submersible cable guard prevents submersible power cables from rubbing in a well casing, cable guard is constructed of durable plastic material Easy-to-use, snap-in wire guide The cable guard is constructed of...

Water Source Inline Sump Check Valve, 1-1/2 in Nominal, MNPT Connection, PVC Body

The 1-1/4 in well point drive coupling connects the well point to the drive pipe. The galvanized steel construction withstands the pounding force necessary to drive a well point into the ground. The design assures a tight joint at the pipe.

Water Source Check Valve, 3/4 in Nominal, Media: Gas, Oil, Water, 2-3/4 in Length, 1-1/2 in Width, 1-1/2 in Height, Brass Body, 200 psi Pressure

Water Source Yard Hydrant Repair Kit, Includes: Head Set Screw, Packing Nut, Plunger Insert and Packing Plunger

Water Source Check Valve, 1-1/4 in Nominal, Brass Body, 200 psi Pressure, 180 deg F, Suitable for: Jet, Submersible and Centrifugal Pumps

The brass insert coupling connects two PVC pipes together. It has 1 in insert x 1 in insert. Use with clamps.

Eco-Flo Sump Pump Check Valve, 1-1/2 x 1-1/4 or 1-1/2 in Connection, MPT x Barb or Spigot Connection, Body Material: Plastic Prevents back flow of water into sump pit