Connection shall be made using Watts® series 35 quick-connect fitting with integral collet and O-ring guide. Fitting shall be able to fully rotate under pressure and allow for easy disconnect and re-use without the use of disconnection tools. Fitting must not disassemble to disconnect....

Use with copper, brass, aluminum or plastic tubing. -65 to 250 deg F temperature range. For ID copper tube size, reduce OD size by 1/8 in. Easy to disassemble, no flaring tool required.

Anderson Metals Hose Insert Adapter, Nominal Size 1: 1/2 in, Nominal Size 2: 3/4 in, Barb, FGH, Nylon

LB-480 Slimline design pump allows to fit into 8 in pipes. Powerful pumps built with durable materials in an easy handling design. Top discharge provides maximum motor cooling efficiency allowing continuous duty operation at low water levels and extended dry-run capability. Urethane, semi-vortex impeller...

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, B16.14, B16.39, for threads ANSI B1.20.1.

Canplas Sewer Pipe Adapter Coupling, Nominal Size: 4 x 3 in, Hub Connection, Schedule Rating: 40, ABS, Black

JM Eagle's wide line of solvent weld ABS pipe is available in 5, 10 and 20 ft lengths in Dia of 1-1/2 to 6 in. ABS pipes are available in both solid and cellular core. Solvent weld joints are designed to provide a rigid...

Canplas Sanitary Pipe Elbow, Nominal Size: 1-1/2 in, Hub Connection, Angle: 90 deg, ABS, Black

The SharkBite® straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to...

Use with copper, brass, aluminum or plastic tubing. For primary use with water, gasoline, oil and vacuum lines.

Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease-of use reduces installation errors. Fastest way to connect PEX, copper, CPVC, PE-RT...

Barb x male pipe. One piece brass. Use with plastic tubing or rubber hose. Intended for use with hose clamp or crimp type ferrule. 32 to 200 deg F temperature range. Barbed edges provide positive connection. Excellent vibration resistance. Barb size is hose ID....

Canplas Cleanout Tee, Nominal Size: 3 in, Hub Connection, Schedule Rating: SCH 40, ABS, Black

SharkBite Max polybutylene adapters are the fastest way to transition between polybutylene pipe and PEX, copper, CPVC, PE-RT or SDR-9 HDPE pipe in any combination. Each polybutylene transition coupling has color-coordinated collars on each end to identify which side goes with which pipe -...

Plug the end of PEX, copper, CPVC and PE-RT pipe. Innovative push-to-connect design makes for quick and easy installation and removal. Ideal for working in tight spaces. Faster install time and ease-of use reduces installation errors. Fastest way to connect PEX, copper, CPVC, PE-RT...

The SharkBite® straight coupling is the easiest plumbing fitting to join any combination of Copper, PEX, CPVC, PE-RT or SRD9 HDPE pipe together. With no soldering, clamps, unions or glue required, it's as simple as inserting the pipe into the fitting deep enough to...

SharkBite Max braided flexible water heater connector allows you to work in tight spaces and easily connect a water heater with existing pipes that don't line up. Our braided water heater supply lines are approved for use on electric or gas water heaters with...

SharkBite Max braided flexible water heater connector allows you to work in tight spaces and easily connect a water heater with existing pipes that don't line up. Our braided water heater supply lines are approved for use on electric or gas water heaters with...

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation. Quick-connect and disconnect Easy to use in confined spaces No...

SharkBite Max flexible water heater connectors with ball valves allow you to work in tight spaces and easily connect water heaters with existing pipes that don't line up. Integrated ball valve allows the water heater supply to be shut off. Approved for use on...

Canplas Sanitary Street Pipe Elbow, Nominal Size: 1-1/2 in, Spigot x Hub Connection, Angle: 90 deg, ABS, Black

Regular-bodied, fast set CPVC solvent cement designed for use on CPVC pipe and fittings, schedule 80 and copper tube size, CPVC hot and cold water pipe and fittings up to 4 in Dia. Flows freely and provides a thick layer of cement on the...

BrassCraft® 1/2 in Nom compression inlet x 1/2 in OD compression outlet 1/4-turn straight valve controls water flow to household plumbing fixtures like faucets, toilets, dishwashers, icemakers, washing machines. The straight valve is most often used where the water pipe enters the room from...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications....

Removes most faucet handles.

PVC is a complete piping system with PVC SCH 40 and SCH 80 pipe that provides exceptional performance in demanding industrial projects where corrosion-resistance is a key requirement. IPEX high-performance vinyl systems with PVC SCH 40 pipe and SCH 80 pipe are designed to...

Used to aid in the installation of kitchen and bathroom faucets. Suitable for 1 in and 7/8 in hex nuts, 4 and 6 point water pipe joints. Internal dimensions of the wrench head are (from the inside out) 2.1 cm, 2.35 cm. and 2.8...

IPEX Reducing Pipe Tee, 2 x 2 x 1-1/2 in Nominal, Slip x Slip x FPT Connection, 280 psi Pressure, 140 deg F Operating, SCH 40 Schedule, PVC, White

SharkBite PEX tubing is a cross-linked polyethylene pipe for a range of residential and commercial plumbing applications. This pipe is approved for all potable water systems and is also available in red and white colors. SharkBite PEX is approved for crimp, clamp or push-to-connect...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 20 ft L, 220 psi, Schedule Rating: SCH 40, PVC

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3 in, 20 ft L, 260 psi, Schedule Rating: SCH 40, PVC

Charlotte Pipe, Bell End, Solid Wall, Nominal Size: 4 in, 10 ft L, SDR 35, PVC, Green

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1-1/2 in, 1.9 in Dia Outside, Wall Thickness: 0.073 in, 20 ft L, 160 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 26, PVC 3 in bell depth

Meets the following specifications for material ANSI/ASTM A-197, for dimensions ANSI/ASME B.16.3, for threads ANSI B1.20.1.

Canplas Reducing Pipe Bushing, Nominal Size: 3 x 2 in, Spigot x Hub Connection, ABS, Black

Canplas Adjustable P-Trap with Union, Nominal Size: 2 in, Hub Connection, ABS, Black

Elkhart Products 111 Pipe Tee, Nominal Size: 2 in, Sweat Connection, Copper

SharkBite® female connectors combine innovative push-to-connect design with a standard FNPT adapter on the opposite end. The push-fit end is compatible with copper, PEX, CPVC or PE-RT pipes and can be installed with no solder, glue, unions or tools required. Instant push-fit connection for...

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

The ProSource pipe couplings connects no-hub drain pipes of similar material. It can be used on cast iron, plastic and steel drain pipes. Suitable for use underground. Measures 1-1/2 in Can be used underground

Anderson Metals Pipe Nipple, Nominal Size: 3/8 in, NPT Connection, 890 psi, Operating Temperature: 200 deg F, Brass, 3-1/2 in L, Suitable for: Brass, Copper and Iron Pipes

This quick-connect elbow fitting is designed for use in potable water applications. It is made of polysulfone plastic and is tested, certified and approved for drinking water. This 1/2 in CTS fitting rotates fully under pressure, connects to multiple materials without the use of...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1-1/4 in, 1.66 in Dia Outside, Wall Thickness: 0.064 in, 20 ft L, 160 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 26, PVC 2-3/4 in bell depth

JM Eagle realizes the growing demand for an effective all-out attack on water pollution, highlighting the need for improved sanitary sewage collection systems. A modern system needs pipe with improved design for reserve strength and stiffness to increase load bearing capacity - all within...

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 1 in, 1.315 in Dia Outside, Wall Thickness: 0.063 in, 20 ft L, 200 psi, Operating Temperature: 23 deg C, Schedule Rating: SDR 21, PVC 2-1/2 in bell depth

Charlotte Pipe Pipe, Bell End, Solid Wall, Nominal Size: 3/4 in, 20 ft L, 200 psi, Schedule Rating: SCH 21, PVC

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

The pipe heat tape help prevent costly damage by preventing copper and PVC pipes from freezing, enabling water to flow freely. The built-in thermostat turns on the heating cable when it senses the temperature at 40 deg F and protects pipes from cracking and...

One-piece construction. Use with brass or steel pipe. All pipe threads are "American Standard Taper Pipe Threads". Fair vibration resistance. Used in low to medium pressure applications. Teflon tape or pipe sealant is recommended. Pipe threads should be tightened 2-1/2 turns past finger tight....

Arrowhead Brass 355 Sillcock, 3/4 in Connection, FIP x Male Hose Threaded, Solid Flange Connection, 125 psi, Temperature Rating: 180 deg F, Body Material: Bronze Alloy, Includes: O-Ring Bonnet and Stem Design Made from heavy-duty lead-free bronze alloy