-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CB CB46 Column Base, 4 x 6 in Post, 7 ga Gauge, Steel, Galvanized
The CB is designed to connect posts to concrete foundations for a wide range of lumber, glulam and engineered-wood product sizes. This column base is either cast-in-place or wet set into the concrete where the bottom of the base plate sits flush with the...- $31.74
- $31.74
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CB CB44HDG Column Base, 4 x 4 in Post, 7 ga Gauge, Steel, Hot-Dipped Galvanized
The CB is designed to connect posts to concrete foundations for a wide range of lumber, glulam and engineered-wood product sizes. This column base is either cast-in-place or wet set into the concrete where the bottom of the base plate sits flush with the...- $56.09
- $56.09
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ST ST18 Strap Tie, 16 ga Gauge, Steel, Galvanized/Zinc
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick...- $1.87
- $1.87
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie LUS LUS46Z Joist Hanger, 4-3/4 in H, 2 in D, 3-9/16 in W, Steel, ZMAX, Face Mounting
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the...- $4.33
- $4.33
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie HU HU48Z Joist Hanger, 6-13/16 in H, 2-1/2 in D, 3-9/16 in W, 4 x 8 in, Steel, ZMAX
The HU is designed for structures requiring additional strength and safety factors. Some models of this heavy-duty, face-mount hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg. Added triangular holes on most...- $19.44
- $19.44
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie HUC HUC44 Joist Hanger, 2-7/8 in H, 2-1/2 in D, 3-9/16 in W, 4 x 4 in, Steel, Galvanized
The HUC is designed for structures requiring additional strength and safety factors. These face-mount joist hangers have concealed header flanges providing cleaner visible lines in exposed conditions. Some models of this heavy-duty hanger can be special ordered with a skewable seat and a seat...- $9.13
- $9.13
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie HU HU46Z Joist Hanger, 5-3/16 in H, 2-1/2 in D, 3-9/16 in W, 4 x 6 in, Steel, ZMAX
The HU is designed for structures requiring additional strength and safety factors. Some models of this heavy-duty, face-mount hanger can be special ordered with a skewable seat and a seat that slopes as far as up to 45 deg. Added triangular holes on most...- $15.63
- $15.63
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie AM 5/8-RP10 Anchor Bolt Holder, 12 ga Gauge, Steel, Blue
The reusable AnchorMate anchor bolt holder is designed to hold the anchor in place before the concrete pour, as required in some jurisdictions. The gripping section secures the bolt in place without a nut for quicker setup and teardown. It also protects the threads...- $22.87
- $22.87
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BC BC460 Post Base, 4 x 6 in Post, 18 ga Gauge, Steel, Galvanized/Zinc
The BC post-base is designed to connect a post to a wood supporting member. The 18 ga material of this post-base makes it ideal for light-duty connections. The BC provides uplift and lateral resistance and includes sizes for both nominal and rough lumber. Provides...- $13.22
- $13.22
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CS CS14-R Coiled Strap, 14 ga Gauge, Steel, Silver, Galvanized
CS coiled utility straps are an ideal solution when it is desired to brace wall studs via the flanges with strap. These products are packaged in lightweight cartons (about 40 lb) and can be cut to length on the job site. Gauge stamped on...- $62.54
- $62.54
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie FBR FBR24Z Fence Bracket, 1-9/16 in W, 18 ga Thick Material, Steel, ZMAX®; Galvanized
The FBR is designed to make connections between fence rails and posts. The design of this fence bracket provides strong, simple connections without the need for toe nails or screws. The versatility of the FBR makes planning and building fences, deck/porch railings and louvers...- $1.46
- $1.46
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie EPCZ EPC4Z Post Cap, 4 x 4 in Post/Joist, Steel, ZMAX
The EPCZ is designed as a fast and easy post-to-beam end connection. With the post and beam flanges in line with each other, this end post cap can accommodate several post sizes. The EPCZ features a ZMAX® finish to meet exposure conditions in many...- $24.34
- $24.34
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CS CS22-R Coiled Strap, 25 ft L, 1-1/4 in W, Steel, Galvanized, Fastening Method: Nail
The CS is a continuous utility strap designed to resist tension and uplift loads. This coiled strap can be cut to length on the job site and used in a single 2X stud or post application. The CS is ideal for many applications including...- $39.34
- $39.34
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ECCQ ECCQ44SDS2.5 Column Cap, 3-5/8 in Post/Joist, Steel
The ECCQ is designed to provide strong column-beam connections in end-of-beam applications in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond the side of the column. The extended bearing surface helps distribute the load...- $90.91
- $90.91
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ECCQ ECCQ66SDS2.5 Column Cap, 5-1/2 in Post/Joist, Steel
The ECCQ is designed to provide strong column-beam connections in end-of-beam applications in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond the side of the column. The extended bearing surface helps distribute the load...- $97.19
- $97.19
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie DPTZ DPT5Z Deck Post Tie, 3-1/2 in L, Steel, ZMAX
The DPTZ deck post tie products are used to attach 2 x 4 (DPT5Z) or 4 x 4 (DPT7Z) vertical posts to the side of stringers, rims or other wood members. Connects a 2 x 4 post to the outside of stair-stringers and rim...- $3.85
- $3.85
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie EPB EPB66 Elevated Post Base, 6 x 6 in Post, 12 ga Gauge, Steel, Gray
These cast-in-place post-bases provide a secure connection to the concrete and the code-required 1 in stand-off to help prevent rot at the post-end. EPB44PHDG can be used both for pier block and cast-in-place installation for 4 x 4 posts. Added stand-off adjustability to suit...- $31.25
- $31.25
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie EPCZ EPC6Z Post Cap, 6 x 6 in Post/Joist, Steel, ZMAX
The EPCZ is designed as a fast and easy post-to-beam end connection. With the post and beam flanges in line with each other, this end post cap can accommodate several post sizes. The EPCZ features a ZMAX® finish to meet exposure conditions in many...- $44.49
- $44.49
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP 1/2-3 Bearing Plate, 3 in L, 3 in W, 3 ga Gauge, Steel
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating...- $2.62
- $2.62
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CBSQ Series CBSQ66-SDS2 Column Base, 6 x 6 in Post, Steel, Galvanized
The CBSQ is designed to be the interface between columns and their foundations. The main function of this column base is to link the column to the concrete footing surface and thereby transmit the structure's stresses to the foundation. The CBSQ uses Strong-Drive® SDS...- $51.92
- $51.92
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP 5/8-2 Bearing Plate, 3/16 in Gauge, Steel
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating...- $1.22
- $1.22
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP BPS 5/8-3HDG Bearing Plate, 3 ga Gauge, Steel, Hot-Dipped Galvanized
The BPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This bearing plate features a slotted hole that allows for adjustability to account for bolts that are not in the middle of the...- $6.11
- $6.11
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CBSQ Series CBSQ44-SDS2 Column Base, 4 x 4 in Post, 12 ga, Steel, Galvanized (G90)
The CBSQ is designed to be the interface between columns and their foundations. The main function of this column base is to link the column to the concrete footing surface and thereby transmit the structure's stresses to the foundation. The CBSQ uses Strong-Drive® SDS...- $43.36
- $43.36
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CCQ CCQ66SDS2.5 Column Cap, 5-1/2 in Post/Joist, Steel
The CCQ is designed to provide strong column-beam connections in wood construction. The seat of the column cap provides an additional surface area of bearing that extends beyond each side of the column. The extended bearing surface helps distribute the load from the beam...- $101.82
- $101.82
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP 5/8 Bearing Plate, 1/4 in Gauge, Steel
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating...- $1.44
- $1.44
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie CB CB44 Column Base, 4 x 4 in Post, 7 ga Gauge, Steel, Galvanized
The CB is designed to connect posts to concrete foundations for a wide range of lumber, glulam and engineered-wood product sizes. This column base is either cast-in-place or wet set into the concrete where the bottom of the base plate sits flush with the...- $31.25
- $31.25
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP 5/8-3 Bearing Plate, 3 ga Gauge, Steel
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating...- $2.62
- $2.62
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ST ST6215 Strap Tie, 16 ga Gauge, Steel, Galvanized/Zinc
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick...- $3.86
- $3.86
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ST ST6224 Strap Tie, 16 ga Gauge, Steel, Galvanized/Zinc
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick...- $4.91
- $4.91
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ST ST12 Strap Tie, 16 ga Gauge, Steel, Galvanized/Zinc
The ST is designed to resist tension loads in a variety of applications. This economical strap-tie is ideal for installation where top or bottom plates are cut, at wall intersections and as ridge ties. The ST is a load-rated, precut strap designed for quick...- $1.27
- $1.27
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP1/2 Bearing Plate, Steel
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections.- $1.04
- $1.04
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie BP 5/8-3HDG Bearing Plate, 3 ga Gauge, Steel, Hot-Dipped Galvanized
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coating...- $4.55
- $4.55
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie SPH4Z Fence Bracket, 8-3/4 in L, 3-9/16 in W, Steel, ZMAX, Fastening Method: Nail
The stud plate tie series offers general solutions for connecting the stud to the top and bottom plates. All models can be used to make a connection to either the top or bottom plate and several are suitable for double top plates and studs....- $3.05
- $3.05
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie RSP RSP4 Reversible Stud Plate Tie, 4-1/2 in L, 2-1/8 in W, Steel, Galvanized
The RSP is designed to create a continuous load path to resist uplift. This versatile stud-plate tie is reversible and is able to connect a wood stud to either a double-top-plate or a sill plate of a wood-framed wall. The RSP features locating tabs...- $1.00
- $1.00
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie PS PS218 Piling Strap, 18 in L, 2 in W, Steel, Hot-Dip Galvanized
The PS is designed to support heavy, concentrated loads by creating a strong connection between wood girders and piles. The PS is a load-rated, precut strap designed for quick installation and optimal performance. This pile strap brings greatest strength to the connection when the...- $11.50
- $11.50
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie ML23Z L-Angle, 2 in W, 3 in H, Steel, ZMAX
The ML angle combines strength and versatility through the use of Strong-Drive® SDS heavy-duty connector screws. Fastener holes are staggered to minimize wood splitting and opposing hole patterns allow for back-to-back installation without fastener interference.- $2.66
- $2.66
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie LS LS90Z Skewable Angle, 3-1/2 in W, 1-1/4 in D, 7-7/8 in H, Steel, ZMAX
Simpson Strong-Tie Skewable Angle, Steel, ZMAX, 3-1/2 in Width, 1-1/4 in Depth, 7-7/8 in Height, 18 ga Material Thickness- $8.00
- $8.00
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie PCZ PC4Z Post Cap, 4 x 4 in Post/Joist, Steel, ZMAX
The PCZ is designed as a fast and easy post-to-beam connection. With the post and beam flanges in line with each other, this post cap can accommodate several post sizes. The PCZ features a ZMAX® finish to meet exposure conditions in many environments. The...- $25.65
- $25.65
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie PF PF24B Top Flange Hanger, 3-3/8 in H, 1-1/4 in D, 1-9/16 in W, 2 x 4 in, Steel
The PFB top-flange hanger is for use in post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFB features a folded seat that raises the 2X joist slightly above the seat radius to enable a tighter...- $2.98
- $2.98
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie PCZ PC6Z Post Cap, 6 x 6 in Post/Joist, Steel, ZMAX
The PCZ is designed as a fast and easy post-to-beam connection. With the post and beam flanges in line with each other, this post cap can accommodate several post sizes. The PCZ features a ZMAX® finish to meet exposure conditions in many environments. The...- $39.63
- $39.63
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie PFDB PFD24B Post-Frame Top-Flange Saddle Hanger, 3-3/8 in H, 1-9/16 in W, 2 x 4 in, Steel
The PFDB is a top-flange saddle hanger designed for post-frame construction. It has dome-shaped joist nail holes that guide nails into the proper installation angle. The PFDB features a folded seat that raises the 2X joist slightly above the seat radius to enable a...- $5.63
- $5.63
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie LUS Series LUS44 Joist Hanger, 3 in H, 2 in D, 3-9/16 in W, Steel, Galvanized, Face
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the...- $3.95
- $3.95
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie PBS PBS46 Post Base, 4 x 6 in Post, 12 ga Gauge, Steel, Galvanized/Zinc
The PBS post-base provides a connection between a post (or column) for decks, patio covers and other top-supported structures. By featuring a 1 in stand-off height, it reduces the potential for decay at post and column ends. Provides a 1 in stand-off between post...- $19.45
- $19.45
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie LUS LUS44Z Joist Hanger, 3 in H, 2 in D, 3-9/16 in W, Steel, ZMAX, Face Mounting
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the...- $5.48
- $5.48
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie LTP LTP5 Lateral Tie Plate, 4-1/2 in W, 5-1/8 in H, Steel, Galvanized/Zinc
The LTP is designed to transfer shear forces for plate-to-rim board or blocking connections. This lateral tie plate can be securely installed over plywood sheathing or directly to the framing members. The LTP features strategically spaced nail holes to prevent wood splitting for single...- $1.94
- $1.94
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie MST MST48 Strap Tie, 12 ga Gauge, Steel, Galvanized/Zinc
The MST is designed to resist tension loads in floor-to-floor and other applications. This high-capacity strap features a dense nailing pattern and can be installed with either nails or bolts. The MST is a load-rated, precut strap designed for quick installation and optimal performance....- $14.22
- $14.22
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie LUS Series LUS46 Joist Hanger, 4-3/4 in H, 2 in D, 3-9/16 in W, Steel, Galvanized, Face
The LUS is an easy to install, economical hanger designed for common lumber sizes. This widely used hanger features double-shear nailing that distributes the load through two points on each joist nail for greater strength. This allows for fewer nails, faster installation and the...- $3.56
- $3.56
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie MSTAM MSTAM36 Strap Tie, 36 in L, 1-1/4 in W, Steel, Zinc Galvanized
The MSTAM is designed to resist tension loads in wood-to-masonry uplift applications. This medium strap tie is for use with either concrete or grout-filled concrete masonry units (GFCMU). The MSTAM utilizes a staggered nail pattern to help minimize wood splitting. Straps are load rated...- $4.30
- $4.30
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.