-
Vendor: VULCAN
Vulcan 34509 Engineer Hammer, 2 lb Head, Forged Milled Head, Steel Head
Vulcan Engineer Hammer, Head Type: Forged Milled, Head Material: Steel, Head Weight: 2 lb, Wood Handle, 16 in L Handle 16 in Premium Hickory handle Forged 2 lbs milled double-faced chamfered sledge head- $15.23
- $15.23
- Unit price
- per
-
Vendor: VULCAN
Vulcan 34520 Hammer, 3 lb Head, Drilling, Double-Striking Head, Steel Head
Drilling hammer with 3 lb drop forged, heat-treated steel head with double striking faces and Hickory wood handle. Drop forged steel head- $17.61
- $17.61
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan B215 Pry Bar, 15 in L, Beveled Tip, Steel
Super Bar 15 in is an essential tool for homeowners and tradesmen. Shepherd's Crookin rocker head design for maximum prying power. Useful for prying molding, scraping and pulling nails. Forged, spring tempered steel for heavy-duty use. Three beveled nail slots; polished, sharp blades for...- $17.11
- $17.11
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan SH2 Carpenter's Half Hatchet, 3-1/2 in Cutting Edge, 22 oz Head, Steel Head, Wood Handle, 13 in OAL
SH2 22 oz standard half hatchet, full polished head with rust-resistant powder coat finish. 3-1/2 in cut, hickory handle. A fine, standard weight tool for construction trades or handyman. Made in USA.- $30.83
- $30.83
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan WB Drywall Hatchet, 12 oz Head, Crowned Head, HCS Head, 15-1/4 in OAL
WB drywall hatchet full polished with milled, crowned face, thin blade, 1-3/4 in cut. Flat head for nailing close to corners. Top quality hickory handle, Sure-Lock® wedged.- $31.37
- $31.37
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan SH Shingling Hatchet, 2-1/8 in Cutting Edge, 14 oz Head, Steel Head, Wood Handle, 13 in OAL
SH shingling hatchet fully polished with milled, crowned face, nail slot and back blade. Three-hole gauge such as 4-1/2 in, 5 in and 14.3 cm for USA standard and metric shingle measurement. Top quality, hickory handle.- $36.68
- $36.68
- Unit price
- per
-
Vendor: DASCO PRO
Dasco Pro 401-0 Cold Chisel, 5/16 in Tip, 5-1/4 in OAL, HCS Blade
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel,...- $6.18
- $6.18
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan FS999ML Hammer, 20 oz Head, Straight Claw, Milled Head, HCS Head, 16 in OAL
Hollow-core fiberglass handle provides better balance and more effective shock absorption than typical solid fiberglass handles. Head "Sure-Lock®" wedged and epoxy sealed. Slip-resistant grip, contoured for comfort. Rust-resistant powder coat finish.- $34.61
- $34.61
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan FS16 Nail Hammer, 16 oz Head, Curved Head, HCS Head, 13-1/2 in OAL
Full octagon face and neck with a hollow core fiberglass handle, absorbs shock more effectively than solid fiberglass. Head is Sure-Lock wedged, epoxy sealed. PVC grip is slip resistant and permanently molded to handle. Polished striking head, sides and claw Octagon neck and face...- $32.47
- $32.47
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan 505M Hammer, 24 oz Head, Rip Framing, Straight Claw, Milled Head, Steel Head, 17 in OAL
Available with either smooth or milled face, this framing hammer sets the industry standard for appearance and balance. Top quality white hickory handle is triple-wedged. Rust-resistant powder coat finish.- $38.69
- $38.69
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan 999ML Hammer, 20 oz Head, Rip Framing, Milled Head, HCS Head
Available in two lengths, with either smooth or milled face, its superb balance and comfortable grip make this hammer a favorite of tradesmen. Top quality, white hickory handle is triple-wedged. Rust-resistant powder coat finish.- $35.11
- $35.11
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan 606M Hammer, 28 oz Head, Rip Framing, Straight Claw, Milled Head, Steel Head, 18 in OAL
An extra-heavy framer designed to provide excellent overall balance. Top quality white hickory handle is triple-wedged. Milled face. Rust-resistant powder coat finish.- $42.56
- $42.56
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan 999 Hammer, 20 oz Head, Rip Framing, Smooth Head, HCS Head
The 20 oz "999" Series hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels...- $30.89
- $30.89
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan 99 Hammer, 16 oz Head, Rip, Smooth Head, Steel Head, 13 in OAL
The 16 oz 99 hammers are based on a unique rip hammer design originated by Vaughan. The extra steel behind the striking face and the deep throat, octagon neck and smoothly swept claws creates a hammer that looks as good as it feels in...- $28.73
- $28.73
- Unit price
- per
-
Vendor: VULCAN
Vulcan 34518 Hammer, 2 lb Head, Drilling, Forged Milled Head, Steel Head
Drop forged, heat-treated steel head, hickory handle and polished double striking faces. 10 in Premium Hickory handle Forged 2 lbs Milled Chamfered Drilling Hammer Head- $13.95
- $13.95
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan BL24 Bricklayer Hammer, 24 oz Head, Square Head, HCS Head, 11-1/2 in OAL
The BL24 bricklayer has a square, flat face with beveled edges, a select hickory handle and the rust-resistant powder coat finish.- $27.64
- $27.64
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan BL16 Bricklayer Hammer, 16 oz Head, Square Head, HCS Head, 11 in OAL
Square, flat face with beveled edges. Available with select hickory handle, double wedged and epoxy sealed, Steel Eagle® solid steel handle with Shock-Blok® plug in head or fiberglass handle with shock absorbing, hollow core and cushion grip. Rust-resistant powder-coated finish.- $33.06
- $33.06
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan TC432 Hammer, 32 oz Head, Riveting, Ball Pein Head, HCS Head, 15-3/4 in OAL
Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle.- $23.12
- $23.12
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan TC224 Hammer, 24 oz Head, Riveting, Ball Pein Head, HCS Head, 15-1/4 in OAL
Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle.- $20.55
- $20.55
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan TC120 Hammer, 20 oz Head, Riveting, Ball Pein Head, HCS Head, 15 in OAL
Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle.- $18.39
- $18.39
- Unit price
- per
-
Vendor: VAUGHAN
HAMMER BALL PEIN 8OZ WD HNDL
Concentrically ground polished striking head and pein, bevel with cheeks ground smooth finished in rust resistant black paint. Handle made of white hickory and triple wedged into eye with wood and steel wedges.- $13.81
- $13.81
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan TC2012 Hammer, 12 oz Head, Riveting, Ball Pein Head, HCS Head, 12 in OAL
Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle.- $15.62
- $15.62
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan TC016 Hammer, 16 oz Head, Riveting, Ball Pein Head, HCS Head, 13-3/4 in OAL
Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle.- $16.84
- $16.84
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan TC504 Hammer, 4 oz Head, Riveting, Ball Pein Head, HCS Head, 10-1/4 in OAL
Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle.- $13.84
- $13.84
- Unit price
- per
-
Vendor: STANLEY
Stanley 10-525 Carpet Knife, 3/4 in W Blade, HCS Blade, Angled Handle, Gray Handle
This adjustable carpet knife allows for a controlled cutting depth. An angled handle allows the user to access hard to reach places and up to 10 blades can be stored in the handle for convenience. Retractable blade for controlling depth of cut Angled handle...- $11.58
- $11.58
- Unit price
- per
-
Vendor: FORTUNE PRODUCTS
Accusharp 001C Knife Sharpener, Diamond-Honed Tungsten Carbide Abrasive, Plastic Handle
Sharpen knives (even serrated knives), cleavers, axes, machetes and many other cutting tools in about 10 secs. The large, ergonomic handle fits either hand and the full-length finger guard safely protects your fingers. The sharpening blades are diamond-honed tungsten carbide and provide years of...- $12.66
- $12.66
- Unit price
- per
-
Vendor: ESTWING
Estwing E3-30SM Hammer, 30 oz Head, Framing, Rip Claw, Milled Head, Steel Head, 16 in OAL
Head and handle are fully polished and forged in one-piece with a longer handle for more striking power. Shock reduction grip is molded on for comfort and durability and reduces vibrations caused by impact. Estwing's solid steel framing hammer, milled has a longer handle...- $54.95
- $54.95
- Unit price
- per
-
Vendor: ESTWING
Estwing E3-20SM Hammer, 20 oz Head, Rip Claw, Milled Head, Steel Head, 13-3/4 in OAL
Head and handle are fully polished and forged in one-piece with a longer handle for more striking power. Shock reduction grip is molded on for comfort and durability and reduces vibrations caused by impact. Estwing's solid steel framing hammer, milled has a longer handle...- $36.61
- $36.61
- Unit price
- per
-
Vendor: STANLEY
Stanley 11-961A Hook Blade, 2-1/16 in L, Carbon Steel, 2-Point, 100/PK
Blade shape and edge protection helps prevent damage to whatever is beneath material being cut. Fits most standard utility knives. Cuts and trims roofing materials, linoleum, carpet, fabric, cartons and sheet materials. Blade shape helps prevent damage to materials beneath cutting surface- $80.02
- $80.02
- Unit price
- per
-
Vendor: STANLEY
Stanley 55-035 Nail Puller, 11 in L, Offset Claw Tip, HCS, Black/Yellow, 5/8 in Dia, 3/4 in W
Heat-treated for durability with a double end, 90 deg and 30 deg, puller and fully sharpened claw tips. Double-end puller features 90 and 30 deg offset claws Comes with fully sharpened claw tips Heat-treated for durability- $16.30
- $16.30
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan California Framer Series CF2 Rip Hammer, 19 oz Head, Milled Head, HCS Head, 16 in OAL
The Vaughan California Framer combines features of two of our most popular tools into a rugged, heavy construction hammer. The smoothly swept claws were borrowed from our "999" rip hammer and the extra-large striking face, hatchet eye and sturdy handle are a heritage of...- $32.20
- $32.20
- Unit price
- per
-
Vendor: DASCO PRO
Dasco Pro 402-0 Cold Chisel, 3/8 in Tip, 5-5/8 in OAL, HCS Blade
Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high carbon steel that has been heat-treated, these chisels are to be used on cast iron, wrought iron, steel,...- $6.40
- $6.40
- Unit price
- per
-
Vendor: DEWALT
DeWALT DWHT20544L Panel Saw, 15 in L Blade, 11 TPI, Steel Blade, Aluminum Handle
Unique tooth geometry which features a three-sided edge design. The teeth are induction hardened, so they will hold their edge longer and resist damage that could occur when contacting nails and staples embedded in wood, also has a low friction ToughCoat blade coating that...- $23.55
- $23.55
- Unit price
- per
-
Vendor: VULCAN
Vulcan 34516 Hammer, 3 lb Head, Cross Pein Head, Steel Head
Cross Pein hammer with 3 lb steel head and Hickory wood handle, 16 in L.- $19.39
- $19.39
- Unit price
- per
-
Vendor: STANLEY
BOARD BENDER 5/8 INCH STEEL
Made of extra heavy duty carbon steel with 5/8" high-carbon steel bar. Use the hook on joists and push handle down to squeeze boards tight, or use to straighten decking or joists. The cushioned handle is designed for kneeling to maintain pressure; frees both...- $53.50
- $53.50
- Unit price
- per
-
Vendor: STANLEY
Stanley 15-809 Utility Saw, 10 in L Blade, 24 TPI, Bi-Metal Blade, Comfort-Grip Handle, Cast Aluminum Handle
The Stanley Mini-hack TM utility saw is indispensable for cutting in tight spaces and narrow crevices. Cast aluminum handle is lightweight, comfortable and durable Handle covers blade to help protect user's hands For cutting in tight spaces and narrow crevices- $13.80
- $13.80
- Unit price
- per
-
Vendor: XCELITE
Xcelite XNB103 Replacement Knife Blade
Used for most detailed cutting and stripping. Blades interchangeable with other similar knives; packed in transparent plastic containers. Fits handle Xn-100 (622.2525).- $5.12
- $5.12
- Unit price
- per
-
Vendor: XCELITE
Xcelite XNS100 Hobby Knife Set, 5-13/16, 5-3/4 in L Blade
Used for light- to medium-duty cutting on paper, also for soft and lightweight materials or wood. Includes: (2) hobby knife handles (5 -13/16 in and 5 -3/4 in), (10) assorted blades, for a wide range of cutting operations.- $23.22
- $23.22
- Unit price
- per
-
Vendor: STANLEY
Stanley 20-221 Handsaw, 10 in L Blade, 11 TPI, Contour-Grip Handle, Wood Handle
The 10 in SharpTooth™ fine finish mini hand saw is a multi-purpose utility saw ideal for cutting all wood types, plastic pipes and laminate. It is designed to stay sharp and cut fast on push and pull strokes. Made in the USA with global...- $15.31
- $15.31
- Unit price
- per
-
Vendor: VAUGHAN
Vaughan FS505M Hammer, 24 oz Head, Framing, Straight Claw, Milled Head, HCS Head, 17 in OAL
Hollow-core fiberglass handle provides better balance and more effective shock absorption than typical solid fiberglass handles. Head Sure-Lock® wedged and epoxy sealed. Slip-resistant grip, contoured for comfort. Rust-resistant powder coat finish.- $47.72
- $47.72
- Unit price
- per
-
Vendor: XCELITE
Xcelite XN100 Hobby Knife, 5-13/16 in L Blade, Steel Blade
Precision made for cutting on paper, soft and lightweight materials or wood. Interchangeable blades held firm in sure-locking four jaw chuck. Stay sharp blades made of surgical steel and honed for closest cutting and long-lasting edge. XNB-103 replacement blade.- $4.90
- $4.90
- Unit price
- per
-
Vendor: STANLEY
Stanley 20-112 Clamping Mitre Box, 45/90 deg, 45 deg Face Angle, 22.5 deg Octagonal Cutting Slot, Polypropylene
Holds material securely for accurate cuts. Material secures to the base with a twist of the cam pins. Cuts miters on 45 deg and 90 deg angles, face angle of 45 deg and 22-1/2 deg angles, molded-in storage compartments hold cam pins and pencil....- $15.54
- $15.54
- Unit price
- per
-
Vendor: STANLEY
Stanley 15-334 Handsaw, 15 in L Blade, 8 TPI, Extra Wide Handle, Wood Handle
Saw has an aggressive three-sided tooth design; back of saw can be used to mark 45 deg and 90 deg angles and teeth can be re-sharpened; select hardwood handle provides comfort and control. Aggressive three-sided tooth design cuts 50% faster than conventional hand saws...- $18.13
- $18.13
- Unit price
- per
-
Vendor: NICHOLSON
Crescent Nicholson 21474H/21474 File Handle with Inserts, 4-1/2 in L, Plastic
Interchangeable cushion inserts designed to fit most popular files. Handle made of strong high-impact material. Contoured to fit hand for straight, lathe and draw filing. Non-slip textured finish for easier grip. Includes four inserts. Interchangeable cushion inserts are designed to fit most popular files...- $9.80
- $9.80
- Unit price
- per
-
Vendor: STANLEY
Stanley 15-113 Hacksaw, 12 in L Blade, 24 TPI, 3-7/8 in D Throat, Plastic/Rubber Handle
The Stanley 12 in high-tension hacksaw features a rugged design for heavy-duty use. The quick-release, blade changing mechanism in the handle maintains the tension setting and an easy to access tension guide is on the handle lever. Rugged design for heavy-duty use Fully adjustable...- $38.03
- $38.03
- Unit price
- per
-
Vendor: STANLEY TOOLS
STANLEY 15-106A Coping Saw, 6-3/8 in L Blade, 15 TPI, HCS Blade, Cushion-Grip Handle, Plastic/Rubber Handle
The Fatmax® 6-3/8 in coping saw has a high-grade carbon hardened and tempered blade and an ergonomically designed cushion grip handle. It is ideal for fine woodworking applications such as cutting intricate patterns. High-grade carbon hardened and tempered blade provides clean, controlled cutting action...- $14.44
- $14.44
- Unit price
- per
-
Vendor: STANLEY TOOLS
STANLEY 15-104 Coping Saw, 6-1/2 in L Blade, 15 TPI, HCS Blade, Cushion-Grip Handle, Plastic/Rubber Handle
New ergonomically designed cushion grip handle for comfort. Hardened tempered blade provides clean, controlled cutting action. Hardened and tempered blade provides clean and controlled cutting action Ergonomically designed cushion grip handle for comfort- $12.74
- $12.74
- Unit price
- per
-
Vendor: ESTWING
Estwing HC-10 Handy Claw, 10 in L, Steel
Estwing's Handy claw is the best tool for getting under and removing nails, with a comfortable vinyl grip.- $15.26
- $15.26
- Unit price
- per
-
Vendor: ESTWING
Estwing E3-24SM Hammer, 24 oz Head, Framing, Rip, Claw, Milled Head, Steel Head, 16 in OAL
Head and handle are fully polished and forged in one-piece with a longer handle for more striking power. Shock reduction grip is molded on for comfort and durability and reduces vibrations caused by impact. Estwing's solid steel framing hammer, milled has a longer handle...- $46.54
- $46.54
- Unit price
- per
-
Vendor: ESTWING
Estwing E3-2H Carpenter's Hatchet, 3-5/8 in Cutting Edge, Steel Head, Nylon/Vinyl Handle, 13 in OAL
Estwing's solid steel carpenters hatchet have bonded and molded Shock Reduction Grip® which offers the utmost in both comfort and durability, while reducing vibrations caused by impact. The head and handles are fully polished and are forged in one piece. Smooth face- $47.00
- $47.00
- Unit price
- per
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.