-
Vendor: SENCO
Senco H06BAA Wire Staple, 7/16 in W Crown, 3/8 in L Leg, 20, Galvanized
Chisel point. For insulation, vapor barriers and felt roofing.- $14.16
- $14.16
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch C8P99DG Framing Nail, 2-1/2 in L, Steel, Thickcoat, Smooth Shank
Bostitch Framing Nail, Collation Angle: 15 deg, Point Type: Diamond, Shank Type: Smooth, 0.099 in Dia, 2-1/2 in L, Steel, Thickcoat, Suitable for: N63CP, N64C, N66C, N66BC, N75C Pneumatic Nailer, DUOFAST CNW-75, Hitachi NV83A, Makita AN901, Max 890C, Paslode F275C,P275C, F325C, P325C, 5300C, Porter-Cable...- $89.41
- $89.41
- Unit price
- per
-
Vendor: NATIONAL NAIL
ORGILL BULK NAILS 0054212 Common Nail, 4-1/2 in L, 5 ga, Flat Head, 50.85 lb Package
Popular for general rough framing and construction. Flat head, typically 3 to 4 times the diameter of the shank for solid holding power Round, smooth, thick shank provides greater resistance to bending- $130.98
- $130.98
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0053208 Common Nail, 20D, 4 in L, Brite, Flat Head, Round, Smooth Shank, 1 lb
Popular for general rough framing and construction. Brite finish to enhance corrosion resistance- $5.93
- $5.93
- Unit price
- per
-
Vendor: SENCO
Senco AY11EAA Nail, 3/4 in L, 18, Steel, Electro-Galvanized, Brad, Slight Head, Smooth Shank
Galvanized, smooth shank. Applications such as molding decorative trim, furniture trim, cabinets, drawers, casebacks, baseboards, chair rails and picture frames.- $37.41
- $37.41
- Unit price
- per
-
Vendor: SENCO
Senco MD25AHBD Series Connector Nail, Paper Tape, Plastic Strip Collation, 2-1/2 in L, 15 to 23 Gauge, 0.14 in Diameter
Flat round head. Sencote coating, diamond point. Tested and proven to reduce squeaky subfloors, uneven surfaces and raised nail heads Unique double rings shank design reduces the potential of nail backing out, one of the most common flooring problems- $121.52
- $121.52
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0059178 Finishing Nail, 10D, 3 in L, Carbon Steel, Hot-Dipped Galvanized, Cupped Head, Round Shank, 1 lb
Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT® finish nails come in three basic styles finish, casing and hardened trim. They are used to set door and window frames, apply trim and in...- $7.38
- $7.38
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0606290 Framing Nail, 1-1/2 in L, 9 Gauge, Steel, Galvanized, Clipped Head, Smooth Shank
Use for general rough framing and construction.- $127.52
- $127.52
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0054178 Common Nail, 10D, 3 in L, Steel, Hot-Dipped Galvanized, Flat Head, Round, Smooth Shank, 1 lb
Popular for general rough framing and construction.- $6.28
- $6.28
- Unit price
- per
-
Vendor: PROSOURCE
NAIL CMMN HDG 40D 5IN 50LB
Popular for general rough framing and construction.- $130.98
- $130.98
- Unit price
- per
-
Vendor: PROSOURCE
NAIL CMMN HDG 20D 4IN 50LB
Popular for general rough framing and construction.- $128.38
- $128.38
- Unit price
- per
-
Vendor: PROSOURCE
NAIL CMMN HDG 60D 6IN 50LB
Popular for general rough framing and construction.- $130.98
- $130.98
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch RH-S10D131HDG/X Series Framing Nail, Plastic Strip Collation, Smooth Shank, 4000/PK, 0.13 in Diameter
Bostitch Framing Nail, Collation Type: Plastic Strip, Collation Angle: 21 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Smooth, Material Gauge: 11, 0.131 in Dia, 3 in L, Steel, Galvanized, Suitable for: N88RH, F21PL, F21PL2 Pneumatic Nailer, DeWalt D51845, DUOFAST CN350B, Hitachi...- $186.42
- $186.42
- Unit price
- per
-
Vendor: SENCO
Senco KC28APBX Collated Nail, 3-1/4 in L, Steel, Bright, Clipped Head, Smooth Shank
Senco Collated Nail, Collation Type: Paper Tape, Collation Angle: 34 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3-1/4 in L, Steel, Bright, Suitable for: Model SFN40, SFN2B Pneumatic Nailer- $53.28
- $53.28
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0010178 Deck Nail, 10D, 3 in L, Steel, Hot-Dipped Galvanized, Flat Head, Spiral Shank, 1 lb
ProFIT Deck Nail, 10D, 3 in L, Steel, Hot-Dipped Galvanized, Head Type: Flat, Shank Type: Spiral, Package Quantity: 1 lb, Head Size: 9/32 in, Nails per Pound: 94, Point Type: Diamond- $8.24
- $8.24
- Unit price
- per
-
Vendor: MAZE NAILS
Maze HT200-112 Trim Nail, Hand Drive, 2 in L, Carbon Steel, Smooth Shank, Black, 5 lb
These slim diameter hardwood trim nails are made from a HCS wire to ensure good driving into oak, birch, walnut and other hardwoods. There are many more nails per pound than with ordinary finish nails so they cost less to use and there are...- $8.18
- $8.18
- Unit price
- per
-
Vendor: SENCO
Senco MD25AJBDN Metal Connector Nail, 2-1/2 in L, Steel, Galvanized, Round Head, Smooth Shank
Senco Metal Connector Nail, Collation Type: Paper, Collation Angle: 34 deg, Head Type: Round, Shank Type: Smooth, 0.148 in Dia, 2-1/2 in L, Steel, Galvanized- $125.39
- $125.39
- Unit price
- per
-
Vendor: SENCO
Senco M001001 Finish Nail, 1 in L, 16, Galvanized Steel, T-Shaped Head, Smooth Shank
Senco Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Diameter: 0.063 in, Head Type: T-Shaped, Point Type: Chisel, Shank Type: Smooth, Material Gauge: 16, 1 in L, Galvanized Steel, Suitable for: RoofPro450/455XP, FinishPro 32, F-16S Nailers- $12.75
- $12.75
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0718132 Crown Staple, 1/4 in W Crown, 1-1/4 in L Leg, 18 Gauge, Electro-Galvanized, 4000/PK
Used for subflooring and trim applications. Fits Airy ADA0637CRK, Atro Minor 18NC150, Bea 90/38, Bea 90/40, Besco 90/38, Besco SB 1840 Stapler, Besco TK21N1, Campbell SN258K, Craftsman 18300 Series, Depoan 73/9040, Depoan PN763, DeVilbiss NBSCN2X4, Duo-Fast KN1848A, EZ NS 90/40, Fasco R3C-90/40, Grex 90/25-32-40,...- $18.21
- $18.21
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0092222 Pole Barn Nail, 40D, 5 in L, Steel, Galvanized, Flat Head, Ring Shank, 50 lb
ProFIT Pole Barn Nail, 40D, 5 in L, Steel, Galvanized, Head Type: Flat, Shank Type: Ring, Package Quantity: 50 lb, Head Size: 3/8 in, Nails per Pound: 27, Point Type: Diamond- $169.38
- $169.38
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0092242 Pole Barn Nail, 60D, 6 in L, Steel, Galvanized, Flat Head, Ring Shank, 50 lb
ProFIT Pole Barn Nail, 60D, 6 in L, Steel, Galvanized, Head Type: Flat, Shank Type: Ring, Package Quantity: 50 lb, Head Size: 3/8 in, Nails per Pound: 23, Point Type: Diamond- $177.55
- $177.55
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0132078 Hand Drive Roofing Nail, 1-1/4 in L, Flat Head, 11 ga Gauge, Steel
ProFIT Hand Drive Roofing Nail, Head Size: 7/16 in, Head Type: Flat, Shank Type: Round, Smooth, Point Type: Diamond, 1-1/4 in L, Material Gauge: 11 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 209, Package Weight: 1 lb Large flat head for greater holding power...- $4.97
- $4.97
- Unit price
- per
-
Vendor: DEWALT
DeWALT DW16S2-25GAL Crown Staple, 1 in W Crown, 3/4 in L Leg, 16 ga Gauge, Galvanized
DeWALT Crown Staple, Crown Width: 1 in, Leg Length: 3/4 in, Point Type: Chisel, Material Gauge: 16 ga, Collation Type: Glue, Galvanized- $27.76
- $27.76
- Unit price
- per
-
Vendor: MAZE NAILS
Maze STORMGUARD XR162A530 Connector Nail, 3D Penny, 1-1/4 in L, 10 ga, Carbon Steel, Galvanized
These well-threaded 10 ga nails are STORMGUARD® double hot-dipped zinc-coated to ensure great holding power and long-term rust-protection. The hot-dipped coating is the type of galvanized coating which is recommended by the makers of treated lumber to use with their products.- $26.32
- $26.32
- Unit price
- per
-
Vendor: MAZE NAILS
Maze CLCEM117017 Roofing Nail, 2-1/2 in L, Galvanized Steel, Plain Shank
Double hot-dip galvanized nails. Recommended for fiber cement and cedar shakes and shingle usage. Designed for fiber cement and LP Smartside® siding- $150.03
- $150.03
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T16N200FNB Finish Nail, 2 in L, 16 Gauge, 316 Stainless Steel, T-Shaped Head, Smooth Shank
Simpson Strong-Tie Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Type: T-Shaped, Shank Type: Smooth, Material Gauge: 16, 2 in L, 316 Stainless Steel, Suitable for: Bosch FNS250-16, Bostitch FN1664K, SB-1664FN, GFN1664K, DeWalt DC616K, D51257K, Duo-Fast FloorMaster 200-C, SureShot 764 (Up to 2...- $50.30
- $50.30
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch S10DRGAL-FH Framing Nail, 3 in L, Thickcoat, Full Round Head, Ring Shank
Bostitch Framing Nail, Collation Type: Wire Weld, Collation Angle: 28 deg, Head Type: Full Round, Point Type: Diamond, Shank Type: Ring, 0.12 in Dia, 3 in L, Thickcoat, Suitable for: Model N79WW, N80SB, N86S, N88WWB, N100S, F28WW, GF28WW Pneumatic Nailer, FM350A Porter-Cable- $105.37
- $105.37
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch PT-8DR113FH5 Framing Nail, 2-1/2 in L, Steel, Bright, Clipped Head, Ring Shank
Bostitch Framing Nail, Collation Type: Paper Tape, Collation Angle: 33 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Ring, 0.113 in Dia, 2-1/2 in L, Steel, Bright, Suitable for: Model F33PT, MCN150, MCN250 Pneumatic Nailer- $102.75
- $102.75
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0059098 Finishing Nail, 4D, 1-1/2 in L, Carbon Steel, Hot-Dipped Galvanized, Cupped Head, Round Shank, 1 lb
Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT® finish nails come in three basic styles finish, casing and hardened trim. They are used to set door and window frames, apply trim and in...- $7.38
- $7.38
- Unit price
- per
-
Vendor: SENCO
Senco A302500 Finish Nail, 2-1/2 in L, 15, Steel, Bright Basic, Brad Head, Smooth Shank, 700/BX
Applications: Moldings, picture frame assembly, trim and cabinetry building.- $16.65
- $16.65
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch C5R90BDSS Siding Nail, 1-3/4 in L, Stainless Steel, Ring Shank, 3600/PK
Bostitch Siding Nail, Collation Type: Wire Weld, Collation Angle: 15 deg, Point Type: Blunt Diamond, Shank Type: Ring, 0.092 in Dia, 1-3/4 in L, Stainless Steel, Suitable for: N63CP, N64C, N66C, N66BC Pneumatic Nailer, Hitachi NV65AH, Max CN565, Makita AN611, Porter-Cable COIL200, COIL250 Tools...- $180.82
- $180.82
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T6SND1 Siding Nail, 6d, 2 in L, 316 Stainless Steel, Full Round Head, Annular Ring Shank, 1 lb
Highest quality nails for cedar, redwood and cypress siding materials. High tensile nickel/chromium stainless steel will last the life of wood siding without degradation ever. Slender gauge and blunt diamond point minimize splitting. Generous under-head fillet allows nails to be driven flush or countersunk...- $26.10
- $26.10
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0093172 Square Cut Nail, Concrete Cut Nails, 10D, 3 in L, Steel, Brite, Rectangular Head, Tapered Shank, 50 lb
Masonry nails are hardened nails designed to be driven into concrete or the mortar used to hold together bricks or cement blocks. This rigidity also lends masonry nails to a wide variety of installations ranging from attaching plywood subfloor to securing carpet tack strips....- $207.32
- $207.32
- Unit price
- per
-
Vendor: SIMPSON STRONG-TIE
Simpson Strong-Tie T18N075FNB Finish Nail, 3/4 in L, 18 Gauge, 316 Stainless Steel, T-Shaped Head, Smooth Shank
Simpson Strong-Tie Finish Nail, Collation Type: Glue, Collation Angle: Straight, Head Type: T-Shaped, Shank Type: Smooth, Material Gauge: 18, 3/4 in L, 316 Stainless Steel, Suitable for: Bosch BNS200-18, Bostitch BT1855K, SB-1850BN, SB-2IN1, GBT1850K, DeWalt DC51236K, D51238K, Duo-Fast SureShot 2232, SureShot 4450, SureShot 4450...- $30.10
- $30.10
- Unit price
- per
-
Vendor: SENCO
Senco P19BAB Wire Staple, 1 in W Crown, 1-3/4 in L Leg, 16, Galvanized Steel
Fasteners for ACQ pressure treated lumber. Fits Senco PW200, PW150, PW150R, PW, PW-2 in, PW-R, SPS, MW, Duofast RS-1748, KW-1748, Hitachi N3824A, Fasco F3 SNW-38CT R, F30 SNW-50 R and Halstead HSW14.- $67.88
- $67.88
- Unit price
- per
-
-
Vendor: PROSOURCE
Orgill Bulk Nails 00063192 Casing Nail, 16D, 3-1/2 in L, Steel, Galvanized, Brad Head, Round Shank, 50 lb
Orgill Bulk Nails Casing Nail, 16D, 3-1/2 in L, Steel, Galvanized, Head Type: Brad, Shank Type: Round, Package Quantity: 50 lb, Head Size: 11/64 in- $183.33
- $183.33
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0059198 Finishing Nail, 16D, 3-1/2 in L, Carbon Steel, Hot-Dipped Galvanized, Cupped Head, Round Shank, 1 lb
Finish nails are used for trim and fine finishing work where a smaller, less visible head is desired. PRO-FIT® finish nails come in three basic styles finish, casing and hardened trim. They are used to set door and window frames, apply trim and in...- $7.38
- $7.38
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch PT-12D131GFH2 Framing Nail, 3-1/4 in L, Steel, Galvanized, Clipped Head, Smooth Shank
Bostitch Framing Nail, Collation Type: Paper Tape, Collation Angle: 33 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3-1/4 in L, Steel, Suitable for: Model F33PT, GF33PT, N90PT Pneumatic Nailer- $89.44
- $89.44
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch PT-12D131FH25 Framing Nail, 3-1/4 in L, Steel, Clipped Head, Smooth Shank
Bostitch Framing Nail, Collation Type: Paper Tape, Collation Angle: 33 deg, Head Type: Clipped, Point Type: Diamond, Shank Type: Smooth, 0.131 in Dia, 3-1/4 in L, Steel, Suitable for: Model F33PT, GF33PT, N90PT Pneumatic Nailer- $77.53
- $77.53
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0718202 Finish Nail, 1 in L, 18 Gauge, Steel, Electro-Galvanized, Brad Head, Smooth Shank
Use for interior trim and moldings.- $3.12
- $3.12
- Unit price
- per
-
Vendor: RANGEMASTER
Rangemaster 7468 Fence Staple, 9 Gauge
Used to install barbed wire and field fence. Plastic bucket Barbed and lock staple finish Extra sharp and with holding points Extra holding power on wood posts Easy to handle and install Easy to store- $19.28
- $19.28
- Unit price
- per
-
Vendor: PRO-FIT
1-3/4BRT SM LEAD HEAD 12/1#
NAIL ROOFING LEAD 1-3/4 1LB- $21.24
- $21.24
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0054179 Common Nail, 10D, 3 in L, Steel, Hot-Dipped Galvanized, Flat Head, Round, Smooth Shank, 25 lb
Popular for general rough framing and construction.- $61.88
- $61.88
- Unit price
- per
-
Vendor: BOSTITCH
Bostitch BCS1512 Flooring Staple, 1/2 in W Crown, 1-1/2 in L Leg, 15-1/2 Gauge, Steel
Bostitch Flooring Staple, Crown Width: 1/2 in, Leg Length: 1-1/2 in, Point Type: Chisel, Material Gauge: 15-1/2, Collation Type: Glue, Steel- $110.03
- $110.03
- Unit price
- per
-
Vendor: PRO-FIT
ProFIT 0054282 Finishing Nail, 12 in L, Carbon Steel, Hot-Dipped Galvanized, Flat Head, Round Shank, 50 lb
Specialty nails are a collection of fastener solutions that fulfill unique requirements for specific applications. The PRO-FIT® specialty category includes drywall, duplex, flooring, joist hanger, lattice, pole barn, spikes, trim and underlayment nails.- $103.53
- $103.53
- Unit price
- per
-
Vendor: STINGER
ProFIT 0168112 Neo Roofing Nail, 1-3/4 in L, Flat Head, 10 ga Gauge, Steel
ProFIT Neo Roofing Nail, Head Size: 7/16 in, Head Type: Flat, Shank Type: Ring, Point Type: Diamond, 1-3/4 in L, Material Gauge: 10 ga, Steel, Electro-Galvanized, Approximate Nails per Pound: 123, Package Weight: 50 lb Large flat head for greater holding power Neoprene washer...- $137.41
- $137.41
- Unit price
- per
-
Vendor: PROSOURCE
National Nail 00004132 Siding Nail, 6d, 2 in L, Steel, Galvanized, Flat Head, Round, Spiral Shank, 50 lb
For applying wood and hardboard siding to wood structures. Hot-dipped galvanized to enhance corrosion resistance- $176.60
- $176.60
- Unit price
- per
-
Sidebar
Recently Viewed Products
1
/
of
20
- Choosing a selection results in a full page refresh.