The Zenith Feed-Thru F connectors come in a 2 or 10 piece pack to assist in the connection of two or more coaxial cables for a further reach while providing a clean connection point for wired electronics. The feed-through design allows cable to be...

The Zenith Crimp-On F connectors connect a RG6 coax cable and secure connection for coax terminations with the use of a crimping tool (not included). Can be used to connect an RG6 cable to a TV, VCR or satellite. Connector for RG6 coax cable...

The Zenith right angle coax F connector can be used to adapt an RG6 coaxial cable from male to female or vice versa and is ideal improved routing of coaxial cables in tight spaces or where cable bending is not an option. This space-saving,...

The Zenith RG6 quick F plug connector converts a screw-type connector to a simple push-on connector for an easier installation and features a durable metal construction with a screw thread to attach the plug. The quick disconnect design allows for fast and easy conversion...

WALL JACK MOD 2PHONE FLUSH WHT

The Zenith universal wall phone jack with white finish is for surface mounting to a standard outlet box. The white trim provides a neutral cover for your spaces decor. Standard outlet for wall mounted phone

The Zenith universal wall phone jack with silver finish is for surface mounting to a standard outlet box. The silver trim adds an industrial and modern decor. Standard outlet for wall mounted phone

The flush mount telephone wallplate with white finish allows flush mounted connection of phone line through a wall. Connect phone wire through wall

The Zenith telephone triplex jack with white finish connects 3 phones to 1 wall receptacle. These jacks accept line cords from phone, answering machine or other auxiliary device. Split one phone jack into three 6-conductor triplex jack

ADAPTER PHONE OUTLET 2-WAY WHT

The Zenith inline coupler with white finish allows 2 line cords to be connected to create a longer cord. Connect two modular line cords Six conductor inline coupler

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. The rounded...

Heavy-duty zip ties are hard-wearing and designed for rugged industrial, automotive and farm/ag applications demanding high levels of tensile strength and large bundle diameters. Permanently secured until you cut them off GB ties lock tight without stretching or sliding. The thick nylon 6/6 material...

Zenith 4 wire round station wire, 50 ft with almond finish connects to junction boxes and wallplates. This 50 ft cable has been approved for the use in behind the wall installations. Approved for behind wall installation Ideal for running behind the wall to...

Zenith 4 wire round station wire, 50 ft with almond finish connects to junction boxes and wallplates. This 50 ft cable has been approved for the use in behind the wall installations. Approved for behind wall installation Ideal for running behind the wall to...

Splices 19-26 AWG line cord. Crimping tool required, sold separately. Crimping tool required 19 to 26 AWG line cord

The Zenith surface mount jack with white finish allows you to easily add a modular phone jack. Add modular phone jack

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. The rounded...

For one each duplex receptacle and toggle switch. 4 in square. Raised 1/2 in. 6.5 cu-in capacity. UL listed. No bonding jumper is required for covers with (1) crushed corners (2) two or more device attachment screws (3) a lockwasher or equivalent

Connects phone or modem to phone outlet. Features a 6 position, 4 conductor RJ11 connector

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. The rounded...

Connects phone or modem to phone outlet.

Use to connect EMT conduit to a metal box or enclosure to form a 90 deg bend. Removable aluminum cover facilitates wire pulling. Die-cast locknut provided. UL, CSA approved. Removable aluminum cover facilitates wire pulling, die-cast locknut provided

Used to mount one toggle switch on box in surface mount applications. Raised 1/2 in. 6-1/2 cu-in capacity. UL listed. No bonding jumper is required for covers with (1) crushed corners (2) two or more device attachment screws (3) a lockwasher or equivalent

Used to mount switches or receptacles on boxes in surface mount applications. Raised 1/2 in. For one 30-50 A, single receptacle, 2-9/64 in Dia. 6-1/2 cu-in capacity. 4 in square. UL listed. No bonding jumper is required for covers with (1) crushed corners (2)...

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 1, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 12.5 cu-in, Dimensions: 4.25 in H x 2.56 in W x 2.5 in D, Steel, Gray, Nail-On Mounting, Suitable for: Switches, Outlet, Includes: Plaster...

Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included....

Beveled corner box, designed to prevent the clamp screws from protruding into back wall. Non-metallic sheathed cable clamps. Acceptable for use in 2 hrs rated walls. Four cable knockouts (end). One 1/2 in conduit knockout (bottom). No bracket, clamp screws through beveled corners. With...

Die cast zinc round 4 in cover and lamp holder combination. Powder coat finish, scratch-resistant. For wet locations. Includes installation hardware, gasket and multi-lingual instructions. Uses 75 to 150 W maximum, Par-38 lamps, not included. UL listed 1598, cUL. Rugged die-cast construction State-of-the-art powder...

Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include...

High-impact thermoplastic. Flame retardant to 105 deg C. Use with locknut to terminate threaded Rigid or IMC conduit to an outlet box. The rounded surface of the bushing prevents damage to wire insulation. Required by the NEC. UL listed and CSA approved. The rounded...

Gangable 3 in x 2 in switch box, offers the option of constructing a box to hold two or more devices. Beveled corners prevent the clamp screws from protruding into the back wall. With non-metallic sheathed cable clamps. Acceptable for use in 2 hrs...

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified....

With No. 1107 wallplate. UL listed. 15 A, 125 V, grounded. Carded.

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified....

Adjusts depth of receptacles and switches to allow proper fit of trim plate. Adjusts length of receptacles and switches for proper fit of face plate 4 in stack of spacers twists apart easily for desired thickness

Design makes fast, clean cuts. Cuts flexible, water-tight flexible and PVC conduit 1/2 in to 1 in. Reversible cutting blade, lightweight nylon handles, compact 8 in tool fits neatly in pocket or tool pouch. Compact design saves space Design makes fast, clean cuts Eliminate...

Slide-card kit with 40 assorted terminals and disconnects. Butt splices: Five 22-16 AWG red, four 16-14 AWG blue, three 12-10 AWG yellow. Ring terminals: Six 22-16 AWG red, four 16-14 AWG blue. Spade terminals: Five 22-16 AWG red, three 12-10 AWG yellow. Female disconnects:...

This convenient assortment kit of the most popular wire connectors in the industry is ideal for the homeowner and will meet all their DIY wire connecting needs. GB's exclusive WI regard line of wire connectors is the industry standard for twist on connectors with...

These Gardner Bender 30 A battery clamps (2-PK) are coated in highly conductive copper for excellent performance. Each has a color-coded covering on the handle. Clad in highly conductive copper

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs. UL listed.

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs. UL listed.

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed. Butt splices are fully insulated and are Rated at 600 V maximum

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed. Butt splices are fully insulated and are Rated at 600 V maximum Magnetic tip

Crimp connectors for strong, vibration-resistant permanent connections in branch circuits and fixture wiring. UL listed. Permanent connection

Connects phone or modem to phone outlet.

For easy crimp splicing. Insulated copper conductor rated to 600 V maximum. Temperature rating of 167 deg F maximum. Clamshell package. cULus Listed. Butt splices are fully insulated and are Rated at 600 V maximum

The Zenith coiled phone cords with a white finish connects a phone handset to a telephone base. The flexible coiled ribbon cord retains its spring and helps provide a space-saving, organized finish look and features a 6 position, 4 conductor RJ11 connectors. Connect phone...

For snap-in splicing of low-voltage AWG wire without prior stripping. 75 deg C temperature rating. Clamshell. Secure connections without stripping wire

These plastic Kwik Clips are specially designed clips that are great for mounting bundles, cables, cords, tools and more to drywall, wood and painted surfaces. They feature a ratcheting and releasable function that allows adjustment to a range of bundle diameters and also contain...