Cutler-Hammer Ground Bar Kit, 10 Terminals, 4.7 in Length, 2.3 in Width, 1/2 in Height

Single pole side wire switch. Grounding terminal screw standard. 15 A, 120/277 V rating. 0.050 in thick steel mounting strap zinc-plated for corrosion resistance. Terminal screws backed out ready for wiring. Side wire terminals accept up to #10 solid or stranded wire. Pilot light...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

Designed to compensate for length changes due to temperature variations in exposed conduit runs. 6 in maximum. Exclusive 2 in expansion fitting with an 8 in travel distance Two-piece molded design with lubricated seals for easier movement for the life of the product Ridges...

You can put the Boston Harbor flush mount ceiling fixture in any room in your home to provide a beautiful decorated lighting fixture. The cool, simplistic line design looks bright and tasteful, matches most styles of interior furnishing, provide an energetic, clean lighting to...

Single meter socket, lever bypass, five terminals, 200 A, 600 VAC, OH/UG service. Connections line number 6 to 350 kcmil, load number 6 to 350 kcmil, 3-5/16 hub opening.

Contemporary white finish and durable construction. Elegantly crafted to suit every home need and that perfectly compliment to your sidewalk, garden path, or driveway. The lantern has a rustic brown finish Clear bent, bent beveled glass, weather resistant panels Uses 1 x 60W maximum...

WIRE BLDG CSA NMWU 12/3W/G150M

For installation of low-voltage devices in an existing wall. Thinner rectangular flange for faster, easier installation, less protrusion on the wall. Shallow bracket means less material, easier to work with. Can be installed vertically or horizontally. UL listed. Quick, easy stud mounting and a...

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. UL listed E35297.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

For use with non-metallic solvent weld fittings. Non-conductive, impact, corrosion and sunlight-resistant. Manufactured to NEMA TC-2, Federal specification WC1O94A and UL 651 specifications. UL 651 Listed to the NEC by the ETL, UL listed.

LIGHT GLOBE ACRY BALL WHT 8IN

Full protector plastic strip converts standard grounding receptacle to surge protector for stereos, TVs, computers or other electronic equipment. Rated 15 A, 125 V. Clamping level 400 V. Surge energy rating 170 J. Maximum surge current 10,000 A. Portable strip provides 7 surge-protected outlets...

You can put the Boston Harbor flush mount ceiling fixture in any room in your home to provide a beautiful decorated lighting fixture. The cool, simplistic line design looks bright and tasteful, matches most styles of interior furnishing, provide an energetic, clean lighting to...

Raco RETRO-BRACE Fan Box, Number of Knockouts: 2, Cubic Capacity: 15.8 cu-in, Steel, 4.22 in W, 1-1/2 in D, 2.78 in H, Ceiling Mounting, Includes: Mounting Hardware Adjustable for joist spacing from 16 to 24 in Simple "tool free" expansion of brace #10-32, 1...

With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in. PVC construction for...

Round polycarbonate, 4 in Dia, 12.5 cu-in black non-metallic ceiling fan support saddle box, used in new work to mount a ceiling fan or heavy light fixture. Supports a 70 lb fan or 210 lb fixture. Saddle design straddles standard joist. Hands-free installation. 1/2...

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 16, Knockout Size: 1/2, 3/4 in, Number of Gangs: 2, Square, Cubic Capacity: 21 cu-in, Dimensions: 4 in W x 1-1/2 in D x 4 in H, Steel, Gray, Galvanized

Virtually unbreakable, with high-structural rigidity, long-term form retention and impact and abrasion resistance. Screw-catch feature holds mounting screws captive. Matching screws provided. High-gloss finish is soil resistant. Mid-size 4-7/8 in x 4-15/16 in. Polycarbonate power outlet polycarbonate wallplates are virtually unbreakable, with high-structural rigidity,...

LIGHT DECK LOW VLT REC MTL BLK

GB's GreenGard grounding wire connectors are specifically designed for making positive ground connections and feature the same live action as GB's WingGard connections with the added plating protection for corrosion resistance in grounding applications. Green in color and features a hole at the top...

Provides compliance with 2011 NEC Article 406.12 that states that all receptacles installed in dwelling units must be tamper-resistant. Durable impact-resistant thermoplastic face and back body is virtually unbreakable. "TR" designation provides visual identification. Terminal screws are backed out and ready to wire. Extra-long...

BATTERY ALKALINE PHOTO PX76A

BATTERY ULTRA LI PHOTO 3V CR2

WIRE BLDG 10-STR THHN 300M WHT

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Eaton Load Center, 120/240 V, 125 A, Number of Phases: 1, Number of Spaces: 4, Number of Poles: 8, Number of Circuits: 8, Breaker/Load Center Type: Main Lug, Interrupt Rating: 10 kA, Cable Size: 14 to 1/0 AWG, Wiring Configuration: 3-Wire, Bus Bar Material:...

Eaton Load Center, 120/240 V, 125 A, Number of Phases: 1, Number of Spaces: 4, Number of Poles: 8, Number of Circuits: 8, Breaker/Load Center Type: Main Lug, Interrupt Rating: 10 kAIC, Cable Size: 14 to 1/0 AWG, Bus Bar Material: Aluminum, Enclosure Type:...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Connect rigid or IMC conduit to a load center or other metal enclosure where a weathertight joint is required. Rain, oil and dust tight. Zinc die-cast, flame retardant Lexan throat. Flame-retardant LEXAN® insulated throat Rain, oil and dust tight Oversize locknut assures vibration-proof installation...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

Load Centers are enclosures specifically designed to house the branch circuit breakers and wiring required to distribute power to individual circuits. They contain either a main breaker when used at the service entrance point or a main lug when used as a sub-panel to...

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

Push-in style with captive locking wedge. Rigid PVC. Excellent strain relief and insulation. In a dry location, use to secure #14 to #10 non-metallic sheathed cable to steel outlet box or other metal enclosure. Fits NM cable #14/2 to #10/3. Fits 1/2 in knockouts....

Indoor or outdoor applications. Use to secure the grounding wire to a 1/2 in through 1 in pipe. UL listed. Wire size fits #10 to 2 AWG.

High dielectric plastic. Use to protect wire within flexible metallic conduit (Greenfield, BX). Insert one bushing at each end of conduit. UL approved. No 75400 fits cable range of 14/2, 14/3, 12/2 No 75401 fits cable range of 14/4, 12/3, 6/1, 4/1. No 75402...

Zinc die-cast. Rounded surface prevents damage to insulation. Thermoplastic liner rated at 150 deg F. Indoor or outdoor use. Use with locknut to terminate service conduit to a cabinet. Lug provided for bonding jumper to a neutral bus bar. UL listed and CSA certified....

Indoor or outdoor applications. To support EMT conduit.

To connect EMT conduit together to allow for 90 deg bends. UL listed. Use to connect EMT conduit together to allow for 90 deg bends

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.

Zinc die-cast. Use as an offset connector between two enclosures. Offsets the axis of the raceway 3/4 in. UL approved.