Use to cover exposed knock-out holes in steel outlet boxes and other metal enclosures. Use to cover exposed knockout holes in steel outlet boxes and other metal enclosures

Connects grounding wire to the grounding rod. Approved for direct burial in ground and concrete

Connects grounding wire to the grounding rod. Approved for direct burial in ground and concrete

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of EMT, Rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed meets CSA requirements. Tray boxed.

Aluminum die-cast. Indoor or outdoor applications. Use in an overhead service entrance. Mounts on top of rigid or IMC conduit. Serves as a connecting point for the service entrance wires. UL listed. Tray boxed.

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

Use to reduce the size of the conduit hole knockout opening in a steel outlet box or other metal enclosure. Must use one inside the enclosure opening and one on the outside. UL listed and CSA certified.

Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Use to reduce the entry size of a run of threaded conduit

Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Use to reduce the entry size of a run of threaded conduit

Zinc die-cast. Indoor or outdoor applications. Use to reduce the entry size of a run of threaded conduit. UL listed. Use to reduce the entry size of a run of threaded conduit

Copper-free die-cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL listed. Tray boxed. Use to gain access to the interior of a raceway for wire pulling, inspections and maintenance

Copper-free die-cast aluminum. Use to gain access to the interior of a raceway for wire pulling, inspection and maintenance. UL listed. Tray boxed. Use to gain access to the interior of a raceway for wire pulling, inspections and maintenance

Copper-free die cast aluminum. Indoors or outdoors. Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. UL approved. Tray boxed.

Indoor or outdoor applications. Use to secure rigid or I.M.C. conduit to wood, masonry or similar surfaces.

Indoor or outdoor applications. Use to secure rigid or I.M.C. conduit to wood, masonry or similar surfaces.

Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed. Use to allow a 90 deg change of direction in a run of rigid or IMC conduit

Use to allow a 90 deg change of direction in a run of rigid or IMC conduit. UL listed. Use to allow a 90 deg change of direction in a run of rigid or IMC conduit

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed. Use to join threaded rigid or IMC conduit together

Steel, indoor or out. Use to join threaded Rigid or IMC conduit together. UL listed. Use to join threaded rigid or IMC conduit together

Zinc die-cast. Indoor or outdoor applications. Use to terminate threaded conduit to a knockout box or enclosure, where space within the box is limited. Used with a locknut to provide a short raceway between boxes or enclosures. UL and CSA approved. Use with a...

Halex Quick-Set Connector, Trade Size: 3/8 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight Conduit

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquidtight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved. Fitting will...

Halex Quick-Set Connector, Trade Size: 3/4 in, Compression Connection, PVC, Gray, 2.79 in L, Suitable for: Type B Non-Metallic Liquidtight Conduit

Halex Quick-Set Connector, Trade Size: 1/2 in, Compression Connection, PVC, Gray, 2.37 in L, Suitable for: Type B Non-Metallic Liquidtight Conduit

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquidtight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved. Fitting will...

Fitting will not rust or corrode. No disassembly required. Reusable, hand tightened nut. Use to connect type B non-metallic liquidtight conduit to a weather-proof outlet box, pool/spa equipment motor, central air conditioning unit or various other electrical enclosures or hubs. UL approved. Fitting will...

Fits #14/2, #14/3, #12/2, #10/2, #10/3 NM cable. Snap-in, no screws or locknuts required. In a dry location, use to connect non-metallic sheathed cable to a steel outlet box or other metal enclosure. Design allows for two-step installation. Push into box and insert cable....

Halex Clamp Connector, 3/4 to 1 in Trade, Steel, Galvanized, 1-3/4 in Length, 3/4 in Width, 1-21/32 in Height, Suitable for: 0.2 to 0.85 in Dia Non-Metallic Cable No locknut is required

Halex Clamp Connector, 1-1/4 in Trade, Zinc, 2-1/8 in Length, 1-1/4 in Width, 2-1/8 in Height, Suitable for: #6/3 to #2/3 AWG Non-Metallic Cable, 0.8 to 1.35 in Dia Flex Cord or (3) Conductor or (3) #1/0 Minimum to (3) Conductor or (3) #2/0...

Halex Clamp Connector, 1 in Trade, Zinc, 1-29/32 in Length, 1-1/8 in Width, 1-11/16 in Height, Suitable for: #14/2 to #6/3 AWG or #3/10/3 AWG Non-Metallic Cable or 0.45 to 0.73 in Dia Flex Cord

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure. UL listed.

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.

Zinc die-cast. In a dry location, use to connect flexible metallic conduit (Greenfield or BX) to a steel outlet box or other metal enclosure.

Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.

Zinc die-cast. Use to join two pieces of flexible metallic conduit (Greenfield) together.

Zinc die-cast. Use to connect flexible metallic conduit (Greenfield) to steel outlet box, load center or other metal enclosure. Fits 1/2 in knock outs.

Use to joint EMT conduit to flexible metal conduit. Die-cast zinc. UL listed and CSA certified.

Use to joint EMT conduit to flexible metal conduit. Die-cast zinc. UL listed and CSA certified.

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.

To support EMT conduit where greater load bearing is required. Indoor or outdoor applications.

Indoor or outdoor applications. To support EMT conduit.

Indoor or outdoor applications. To support EMT conduit.

Indoor or outdoor applications. To support EMT conduit.

Indoor or outdoor applications. To support EMT conduit.

Indoor or outdoor applications. To support EMT conduit.

Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.

Indoors or outdoors. To secure EMT conduit to a wood or masonry surface.

Use to gain access to the interior of a raceway for wire pulling, splicing (with limitations as specified by the NEC) and maintenance. With cover and gasket. UL approved. Tray boxed.