Featuring a look and feel that qualify them as modern classics, Decora designer rocker switches add so much at a modest cost that no home should be without them. Their sleek simplicity and smooth, quiet operation stem from quality materials fitted to tight tolerances...

ST6401 TESTER VOLT CONTINTY SP

Heavy-duty voltage and continuity tester designed for any number of jobsite applications. Sperry Instruments unique design allows for convenient single hand testing of outlets when the probes are secured side-by-side on the tester housing. Just insert the probes into the outlet and if voltage...

The patented design of this heavy-duty AC/DC voltage tester allows for convenient single hand testing of outlets when the probes are snapped into the bottom housing of the tester. Just insert the probes into the outlet and if voltage is present the neon indicator...

GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Phillips, Package Quantity: 5 lb, Silver, Includes: (20) 2/3 in, (20) 7/8 in, (20) 1 in, (20) 1-1/4 in, (20) 1-5/8 in, (20) 2 in Phillips Head Screws

The Gardner Bender low volt masonry staples secure bell, speaker, thermostat and telephone wire. The hardened nails can penetrate cement block, mortar and plaster surfaces. UV-resistant polyethylene saddle resilient against cracks and other deterioration Zinc-plated nails resist rust and corrosion Drives in with a...

Gardner Bender switches are available in many different styles and sizes. They are used in countless applications, from basic On/Off to multi-function applications. Most of our electrical switches are suitable for marine, industrial or automotive applications. They are available in a variety of characteristics...

Gardner Bender provides a complete line of staple and fastening solutions for all industries, including industrial, residential, construction or manufacturing. From low voltage wire to service entrance cables, professionals rely on Gardner Bender for quality fastening products. Our staples are designed to offer fast...

GB Screw Kit, Flat Head, 1/2 in Length, Ivory, Suitable for: Wallplates

GB Screw Kit, Flat Head, White Head, 1/2 in Length, Suitable for: Wallplates

Gardner Bender Cable Tie, Duty Rating: Heavy-Duty, 36 in L, 0.35 in W, 6/6 Nylon, Black, 175 lb Tensile Strength

GB Electrician's Screw Kit, Thread Size: #8-32, Head Type: Round, Drive Type: Slotted, Package Quantity: 6.56 lb, Silver, Includes: (40) 1/2 in, (20) 3/4 in, (20) 1 in, (20) 1-1/4 in, (20) 1-1/2 in, (15) 2 in Wallplates Screws

GB Electrician's Screw Kit, Thread Size: #6-32, Head Type: Flat, Drive Type: Phillips, Silver, Includes: (45) 3/4 in, (35) 1 in, (30) 1-1/4 in, (20) 1-1/2 in, (15) 2 in, (15) #6-32 Wallplate Screws Slotted flat-head screws for all-purpose electrical fastening

GB's BigBen aluminum hand bender has improved traditional hand benders by enlarging the hook with a 5X durability factor, increasing the foot pedal size and clearance by 40%, highlighting the markings and incorporating a dual sight-line system for bending on the floor or in...

Adhesive-lined butt connectors are specially designed for waterproof heat shrink applications. Our butt splices provide quick and reliable crimp-type connections and wire repairs. Simply crimp both ends for a long-lasting, secure connection. Insulates and protects connections from wire pullout, moisture intrusion and abrasion Heat...

Adhesive-lined butt connectors are specially designed for waterproof heat shrink applications. Our butt splices provide quick and reliable crimp-type connections and wire repairs. Simply crimp both ends for a long-lasting, secure connection. Insulates and protects connections from wire pullout, moisture intrusion and abrasion Heat...

Gardner® Bender has a versatile toggle switch family with multiple position configurations. Toggle switches feature flat terminals and are available in four different actuations; SPST, SPDT, DPST and DPDT. Flat terminal heavy-duty toggle switches meet the standards of today's automotive, marine and industrial applications...

GB Ring Terminal, 600 V, 4 AWG Wire, Vinyl Insulation, 1/2 in Stud, Yellow Quick and reliable crimp-type wire connections

Gardner Bender Ring Terminal, 600 V, Wire Size: 4 AWG, Insulation Material: Vinyl, Stud Size: 3/8 in, Yellow Quick and reliable crimp-type wire connections

Hubbell Cover, Polycarbonate, Gray, 5-3/4 in L, 5-1/2 in W, NEMA Rating: 3R, Vertical Mounting, Includes: Attached Gasket and Mounting Hardware High-impact polycarbonate construction provides maximum durability Patented quick-fit keyhole mounting system allows installation in under a minute Patented universal fit adapter system technology...

Hubbell Cover, Polycarbonate, Gray, 5-1/2 in L, 4 in W, NEMA Rating: 3R, Horizontal/Vertical Mounting, Includes: Attached Gasket and Mounting Hardware High-impact polycarbonate construction provides maximum durability Patented quick-fit keyhole mounting system allows installation in under a minute Patented universal fit adapter system technology...

Hubbell Cover, Polycarbonate, Clear, 5-1/2 in L, 4 in W, NEMA Rating: 3R, Horizontal/Vertical Mounting, Includes: Attached Gasket and Mounting Hardware High-impact polycarbonate construction provides maximum durability Patented quick-fit keyhole mounting system allows installation in under a minute Pre-configured for GFCI with patented Knock-Out...

Hubbell Wallplate, Grounded Duplex, Number of Gangs: 1, Plastic, White, 4-3/4 in L, 2.93 in W, 5/16 in Thick, Screw Mounting, Includes: Matching Screws No rewire required Completely covers old outdated outlets and switches Polycarbonate material resists wear and tear Won't crack or distort...

Raco Exposed Work Cover, Square, Galvanized Steel, Gray, 4-3/16 in L, 4-3/16 in W, 1-5/8 in Dia, Suitable for: 20 A Receptacles, Includes: Mounting Hardware No bonding jumper is required for covers with (1) crushed corners (2) two or more device attachment screws (3)...

811C COVER TOG 4S 1/2R 1 719

Raco Box Kit, Opening Size: 1/2 in, Opening Shape: Round, Number of Gangs: 1, Number of Outlets: 3, Cubic Capacity: 28 cu-in, Brass Cover, Box Material: Steel, Brass, 5-13/16 in W, 5-5/8 in D, 5-15/16 in H, Floor Mounting Floor box kits are used...

8983-1 PIGTAIL GROUNDING 10PK

873 COVER PLATE 2RECEPTCL 1/4I

867 COVERFORHANDY RECEPT BX 20

841 EXTENSION COVER 1/2IN2DEV

8837 RING 5INSQUARE 1/2INR

829 RING PLASTER 5S 1/2R

8781 RING MUD 2DEV 4-S 1-1/4IN

8775 RING 1 DEVICE 4-S 1-1/4IN

774 RING 4-S 1INR 1DEV

8767 RING PLASTER 4IN SQUARE 1

759 RING PLASTER 4-S 3/4IN

757 RING PLASTER 4-S 1IN

737 RING PLASTER 4-O 1/2IN

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Cubic Capacity: 12-1/2 cu-in, Dimensions: 2.5 in L x 4.22 in W, Steel, Gray, Galvanized, Clip Mounting, Suitable for: 2-Hour Fire Rated Walls, Includes: Plaster Ears and Tiger Grip Clips...

One 1/2 in bottom knockout. Four cable knockouts. 2-1/2 in D x 12.5 cu-in. Armored cable/metal clad/flex clamps. Old work clips on side of box eliminates the need for additional box supports to secure box in wall opening. Acceptable for use in 2 hrs...

8233 BOX 4INSQ 2-1/8INDP WELDS

165 BOX OCTG DEEP 4X2-1/8IN

Raco Extension Ring, Octagonal, Number of Knockouts: 4, Steel, Metallic, Gray, 1-1/2 in L, 4 in W, 4 in H Combination screw heads provide for faster installation Raco octagon boxes and extension rings are crafted from durable pre-galvanized steel and are designed to house...

King Innovation Wire Stripper, Cutting Capacity: 18 to 22 AWG Insulation, 10 to 16 AWG Non-Insulation, Stripping Capacity: 10 to 22 AWG, Jaw Material: Steel, Cushion-Grip Handle, 8-1/4 in OAL Ergonomic comfort squeeze handle eases hand fatigue and provides non-slip grip Features handle lock...

The First Alert CO400 carbon monoxide alarm utilizes a electrochemical carbon monoxide sensor that lasts for up to five years to detect carbon monoxide. This carbon monoxide detector is battery powered, making it portable and easy-to-use anywhere, even in the event of a power...

For deep switches and receptacles. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.

For standard shallow switches and receptacles including single-gang combination devices. Base has two 1/2 in trade size KOs. Accepts NEMA single-gang standard faceplates.

Cover accepts fan bracket device with mounting centers of 3-3/16 in (81 mm). Base has six mounting holes and 4-1/2 in trade size KOs. #10 mounting studs provided. Rated for fans and fixtures up to 50 lb.

Accommodates 15 A (NEMA 5-15R) or 20 A (NEMA 5-20R) duplex devices in place of duplex grounding receptacle included. Cover has twist outs for 500 and 700 Series raceway on each end and sides. Twistouts on ends of box permit running raceway close to...