WINDOW HARDWARE

Cam-type sash lock that can be used on most wood double-hung windows. Stamped steel construction. Contains 2 locks, 2 keepers and 2 sets of installation screws. 1-15/16 in hole spacing...

Used on single or double hung windows. Contains 1 lock, 1 keeper, 1 set of installation screws...

Aluminum bracket with 1/8 in x 1/2 in flat nylon roller, used by International "King-Queen" Series, also used by Academy and A-1 Aluminum...

White plastic housing, flat edge plastic roller, top rollers adjust "up" to provide anti-lift protection, bottom rollers adjust "up and down" for alignment, used on Hilite 200 Series windows...

Roller assembly, 7/16 in nylon, flat edge, nylon housing, 1/8 in x 7/16 in flat edge nylon roller, flat roller edge type...

Prime-Line Roller, Sliding, Steel, Includes: Axle Pin..

Prime-Line Roller, Sliding, Nylon..

7/32 in x 5/8 in center grooved plastic roller, aluminum rivet style axle pins, used by Air Control...

White plastic housing with flat edge steel roller, used on Tomray's Tyco 66 windows and many others...

White plastic guide bracket 5/16 in Dia flat edge brass roller, used on Elco/Century windows...

White plastic housing with 1/16 in guide leg, flat edge plastic roller, used on Rolleze windows...

Black plastic housing, flat edge plastic roller, 1/16 in inside channel guide leg. Used by Premiere and others...

Extruded aluminum bracket, flat edge steel roller, used on International windows...

The H 3501 casement window operator is a left hand aluminum teardrop body type. It has a 8 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dri..

The H 3502 casement window operator is a left hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dri..

The H 3505 casement window operator is a left hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear drive..

The H 3507 casement window operator is a right hand aluminum teardrop body type. It has a 8 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dr..

The H 3508 casement window operator is a right hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dr..

The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driv..

The H 3517 casement window operator is a bronze square body type. It has a 7 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 i..

The H 3520 casement window operator is a right handed aluminum square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dr..

The H 3523 casement window operator is a right handed bronze square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driv..

The H 3528 is non-handed casement operator for butt-hinged casement windows. It has a 10-3/4 in rotating arm and is only 1-3/8 in between screen and sash. It is driven by a heavy cast worm gear and has a full 90 deg motion in both directions. Found on Parlyn windows as well as many others. For brass..

The H 3539 is a non-handed casement locking handle in an aluminum finish with 2-3/8 in mounting holes. As a universal design, the handle is die-cast construction with the handle hanging straight down and used on many aluminum and steel windows. In addition, there is a 3/16 in security hole that lock..

The H 3541 is a left handed casement locking handle in a aluminum finish with 2-3/8 in mounting holes. The handle is die-cast construction with the handle sweeping slightly to the left. This allows a more comfortable grip to open to the left when there are dual casement windows with a center rail di..

The H 3542 is a right handed casement locking handle in an aluminum finish with 2-3/8 in mounting holes. The handle is die-cast construction with the handle sweeping slightly to the left. This allows a more comfortable grip to open to the left when there are dual casement windows with a center rail ..

The H 3598 is a left handed die-cast casement locking handle with an offset base found on many contemporary casement windows. The mounting holes are positioned offset of the centerline down the base placing them closer to the window frame edge or to be more exact, 13/16 in from the tip of the lock t..

The H 3683 is an older style of casement lock-plated antique brass on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being u..

The H 3684 is an older style of casement lock-plated chrome on zinc die-cast and used on older style wood casement windows. The three different keepers allow for most mounting applications whether it be a swing in or swing out casement window. Installation screws are included. Besides being used on ..

The H 3686 casement crank handle is bronze die-cast and has a 11/32 in bore spindle. This fits most operators with a 11/32 in bore spindle such as H 3568 through H 3571. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3 in...

The H 3687 is a brass non-handed casement operator for butt-hinged casement windows. It has a 10-3/4 in rotating arm and is only 1-3/8 in between screen and sash. It is driven by a heavy cast worm gear and has a full 90 deg motion in both directions. Found on Parlyn windows as well as many others. F..

The H 3708 casement window operator is a left hand white teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven..

The H 3709 casement window operator is a right hand white teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear drive..

The H 3711 casement window operator is a right hand white square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven ..

The H 3712 casement crank handle is white die-cast and has a 5/16 in bore spindle. This fits any operator with a 5/16 in bore spindle such as the teardrop style casement operators (see H 3708 and H 3709). It offers excellent torque for easy opening and closing of windows. The crank handle projects o..

The H 3715 is a die-cast tee handle that universally fits many manufacturer's casement operators. The 3/8 in bore fits most operators with a 3/8 in spindle and held firmly in place with the supplied set screw. This tee handle is white in color. The tee design is often used to replace the normal cran..

The H 3716 is a non-handed casement locking handle in a white finish with 2-3/8 in mounting holes. As a universal design, the handle is die-cast construction with the handle hanging straight down and used on many aluminum and steel windows. In addition, there is a 3/16 in security hole that locks th..