CASEMENT HANDLES

The H 3531 casement crank handle is aluminum die-cast and has a 5/16 in bore spindle. This fits any operator with a 5/16 in bore spindle such as the teardrop style casement operators (see H 3502 and H 3508). It offers excellent torque for easy opening and closing of windows. The crank handle project..

The H 3532 casement crank handle is bronze die-cast and has a 5/16 in bore spindle. This fits any operator with a 5/16 in bore spindle such as the teardrop style casement operators (see H 3505 and H 3511). It offers excellent torque for easy opening and closing of windows. The crank handle projects ..

The H 3533 casement crank handle is bronze die-cast and has a 3/8 in bore spindle. This fits any operator with a 3/8 in bore spindle such as the square style casement operators (see H 3514 and H 3520). It offers excellent torque for easy opening and closing of windows. The crank handle projects out ..

The H 3534 casement crank handle is bronze die-cast and has a 3/8 in bore spindle. This fits any operator with a 3/8 in bore spindle such as the square style casement operators (see H 3517 and H 3523). It offers excellent torque for easy opening and closing of windows. The crank handle projects out ..

H 3546 is a universal louver operator in aluminum finished die-cast construction. The mounting holes are 4-3/4 or 3-7/8 in apart. It is a reversible non-handed design that can be used on either left or right handed installations. The universal link arm comes with break-off points with holes every 1/..

H 3668 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Air Control-Keller windows. It is right handed with a matching crank handle with a 2-3/8 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the ce..

H 3670 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Pan-American windows. It is right handed with a matching crank handle with a 2-5/8 in link arm. It has an L shaped mounting hole pattern that has 2 top holes that are 5-1/4 in from center of the to..

H 3672 is an awning operator of aluminum die-cast construction with a gray baked enamel finish used on Stanley-C and E windows. It is right handed with a matching crank handle with a 2-3/16 in link arm. It has an L shaped mounting hole pattern that is 5-1/4 in from center of the top hole to the cent..

The H 3685 awning crank handle is aluminum die-cast and has a 3/8 in bore spindle. This fits most awning operators with a 3/8 in bore spindle such as the universal H 3554 or H 3555. It offers excellent torque for easy opening and closing of windows. The crank handle projects out from the operator 3-..

The H 3713 casement crank handle is white die-cast and has a 3/8 in bore spindle. This fits any operator with a 3/8 in bore spindle such as the square style casement operators (see H 3710 and H 3711). It offers excellent torque for easy opening and closing of windows. The crank handle projects out f..

The H 3892 is a die-cast universal fit tee handle in white. It comes with 5 inserts that allow the tee handle to fit the 5 most popular sized casement operator spindles. No guessing needed, fits every time. The adaptor fits over the existing operator spindle and is locked onto the spindle with the t..

The H 3893 is a die-cast universal fit tee handle in satin bronze. It comes with 5 inserts that allow the Tee handle to fit the 5 most popular sized casement operator spindles. No guessing needed, fits every time. The adaptor fits over the existing operator spindle and is locked onto the spindle wit..

The H 3956 is a die-cast copperite crank handle for Pella casement operators. It has a unique 3/8 in bore that fits the Pella Special deep spline spindle...

The H 3966 is a stone die-cast crank handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee handle is stone in color. The Tee design is often used to replace the normal crank handle when it i..

The H 3968 is a stone die-cast tee handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee handle is stone in color. The tee design is often used to replace the normal crank handle when it int..

The H 4097 is a white die-cast tee handle that fits older Andersen casement operators. The 3/8 in bore fits Andersen 3/8 in spindles and is held firmly in place with the supplied set screw. This tee handle is white in color. The tee design is often used to replace the normal crank handle when it int..

The H 4106 is a die-cast crank handle used on Andersen casement operators. It has a white finish and the Andersen 3/8 in spindle. The unique large bell-shaped base fits the Andersen plastic cover shape...