Striking Tools Hardware Store In NYC Jamaica Hardware

Hollow-core fiberglass handle provides better balance and more effective shock absorption than typical solid fiberglass handles. Head Sure-Lock® wedged and epoxy sealed. Slip-resistant grip, contoured for comfort. Rust-resistant powder coat finish...

Hollow-core fiberglass handle provides better balance and more effective shock absorption than typical solid fiberglass handles. Head "Sure-Lock®" wedged and epoxy sealed. Slip-resistant grip, contoured for comfort. Rust-resistant powder coat finish...

Forged from American made, high carbon steel with a fully polished head and a tempered 3-1/2 in blade. Face has a deep throat and handle is high-density American hickory. Used as an all-purpose, heavy-duty hatchet...

SH shingling hatchet fully polished with milled, crowned face, nail slot and back blade. Three-hole gauge such as 4-1/2 in, 5 in and 14.3 cm for USA standard and metric shingle measurement. Top quality, hickory handle...

SH2 22 oz standard half hatchet, full polished head with rust-resistant powder coat finish. 3-1/2 in cut, hickory handle. A fine, standard weight tool for construction trades or handyman. Made in USA...

Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle...

Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle...

Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle...

Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle...

Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle...

Polished face, bevel and pein. Other surfaces finished in rust-resistant black paint. Compression wedged hickory handle...

WB drywall hatchet full polished with milled, crowned face, thin blade, 1-3/4 in cut. Flat head for nailing close to corners. Top quality hickory handle, Sure-Lock® wedged...

The Vulcan flooring knife cuts soft and hard core vinyl or floor covering. The long point blade is made of sharpened and black finished high-carbon steel. It has a non-slip, comfort hardwood handle...

Use for sharpening knives and scissors...

Brick hammer with 16 oz head and wood Handle, 9-3/4 in L...

Drop-forged and heat-treated for excellent strength during prying, digging and tamping. Hexagon steel construction for enhanced strength, 1 in blade width...

Drop-forged and heat-treated for excellent strength during prying and tamping...

Drop-forged and heat-treated for added strength during prying, digging and tamping...

Drop-forged and heat-treated for added strength during prying, digging and tamping...

Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern...

Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern...

Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern...

Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern...

Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern...

Bar is drop-forged and heated for excellent strength during prying, digging and tamping with hexagon steel construction for enhanced strength. Gooseneck pattern...

Drop-forged heat-treated steel construction. Offset, hexagon steel with large capacity extracting claws and combination puller. Used for industrial demolition, ripping out nails, walls, studs and framework. Stock size 2-1/4 in, black oxide finish resists rust and corrosion...

The Vulcan utility knife is heavy-duty with a 18 mm snap-off knife. It has a comfortable soft grip handle, smooth retract snap-off blade and replacement blade SKU# 3991288...

The Vulcan utility knife has a two smooth retract snap-off blade with replacement blade for SKU# 3944428. Measures 9 mm L and 18 L mm...

Sharp and durable fully hardened blade and edge with a 3 in face and virtually unbreakable handle...

Forged from high-quality steel, machined so that each face is identical and properly shaped, hardened and tempered. Easy grip fiberglass handle...

Vulcan Engineer Hammer, Head Type: Forged Milled, Head Material: Steel, Head Weight: 2 lb, Wood Handle, 16 in L Handle..

This hammer has a 3 lb head and 16 in Hickory handle...

This hammer has a 4 lb steel head and 16 in Hickory handle...

Vulcan Hammer, Head Type: Cross Pein, Head Weight: 3 lb, Fiberglass Handle..

Cross Pein hammer with 3 lb steel head and Hickory wood handle, 16 in L...

Drop forged, heat-treated steel head with polished striking faces and hickory handle...

Drop forged, heat-treated steel head, hickory handle and polished double striking faces...

Vulcan Hammer, Drilling, Head Type: Forged Milled, Head Material: Steel, Head Weight: 3 lb, Fiberglass Handle, 10 in L Handle..

Drilling hammer with 3 lb drop forged, heat-treated steel head with double striking faces and Hickory wood handle...

This hammer has a 4 lb head and 10 in Hickory handle...

The Vulcan fixed blade utility knife has a heavy-duty die cast aluminum alloy body with a knurled handle for positive grip and a full range of replacement blades...

With the Vulcan Miter Box you will be able to make those accurate angled cuts. Your material will stay secure and the bottom of the box can be fastened to the workbench to give you added stability. It's a lightweight, durable and simple to use choice for a variety of projects...

Ball Pein hammer with 8 oz head and wood handle, 10 in L...

Vulcan Hammer, Head Type: Ball Pein, Head Material: CS, Head Finish: Polished, Head Color: Steel, Head Length: 4 in, Head Width: 1-1/8 in, Head Weight: 16 oz, Face Diameter: 1-1/8 in, Wood Handle Handle, Wood Handle, Handle Color: Nature, 12-1/2 in L Handle, 14-1/8 in OAL..

Ball Pein hammer with 24 oz steel head and wood handle, 14 in L...