Best Place To Buy Tools - Jamaica Hardware

Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components...

The 1 in felt polishing wheel is made to take a semi-rough finish and polish it to a smooth finish...

Sanding band covered with 60 grit aluminum oxide abrasive. Use for rough shaping, smoothing wood or fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Bands are easily replaceable on drums. Do not use in excess of 30,000 rpm...

The Dremel® 4300 is the first Dremel® rotary tool to allow tool-less and collet-less accessory changes with the inclusion of the three-jaw chuck. The chuck accepts all Dremel® accessory shank sizes for fast and convenient accessory changes without ever using a wrench. Featuring the all new Pivot Lig..

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit)...

A cylinder covered with aluminum oxide abrasive that sits atop a mandrel with a 1/8 in shank. The replaceable band covering the cylinder is available in extra fine (240 grit), fine (120 grit) or coarse (60 grit)...

Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components...

Versatile brush for removing rust and corrosion and polishing metal surfaces. Deburr and blend surface junctures, clean electrical components...

Improve the grip for bits in our rotary tool line with a genuine Dremel® collet set. With the 480, 481, 482, 483 collets, plus a quick-change collet nut, you can easily use a wide range of bits...

The Dremel® chuck holds accessories without using a collet eliminating having to use a wrench and creating quick and easy accessory changes. Ideal when the application requires numerous accessory changes...

Dremel® accessories are designed to be just what you need to complete projects. This grinding stone is for used to sharpen chain saw blades. For use with the Dremel® chain saw sharpening attachment...

Dremel® chain saw sharpening stone is for use with Dremel® chain saw sharpener attachment. This replacement stone provides an excellent cutting edge on the chain saw's cutting tooth. Having a sharp chain saw blade improves chain saw performance and safety...

Precision ground abrasive stone for quick, easy sharpening of chain saw blades...

For rotary tool #245, 250, Series 3 and later, #260, 270, 280, Series 2 and later, #275, 285, 370, 380, 395, 595, free wheeler 850, mini mite 750, Moto-Flex tools 232 and 332, Chainsaver tools 241, 246, 277 and 8504, flexible shaft attachments 225 and 90199, Handpiece 235 and 237...

For rotary tool #245, 250, series 3 and later, #260, 270, 280, series 2 and later, #275, 285, 370, 380, 395, 595, free wheeler 850, mini mite 750, moto-flex tools 232 and 332, chainsaver tools 241, 246, 277 and 8504, flexible shaft attachments 225 and 90199, handpiece 235 and 237...

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed...

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed...

Flapwheels grind and polish flat or contoured surfaces. They are used most effectively as a finishing sander after heavier surface sanding and material removal is completed...

Dremel Abrasive Buff, Aluminum Oxide/Silicone Carbide, 1 in Dia, Suitable for: Dremel Rotary Tools, Includes: (1) Coarse 180 Grit and (1) Medium 280 Grit..

The 512E 320-grit abrasive buff is ideal for use on metal, glass, wood, aluminum and plastics and can easily remove tarnish from brass...

A polishing wheel for your rotary tool that has the polishing compound inside. The 520-02 polishing wheel is impregnated with a silicon carbide abrasive and lubricant, eliminating the need for polishing compound. Easy-to-use and less messy, the 520-02 is ideal for high-luster polishing. Pack include..

Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots...

Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel. Ideal for cleaning, deburring and surface-finishing. Very effective on flat surfaces and in hard-to-reach places, such as slots...

Stainless steel brushes do not cause after-rust when used on corrosion-resistant materials like pewter, aluminum and stainless steel...

Wheel tip for general-purpose use. Non-sparking and softer than steel. Will not scratch soft metals like gold, copper, brass...

Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass...

Brass brushes are non-sparking and softer than steel. They will not scratch soft metals like gold, copper, brass...

This wheel for cutting metal with limited use on wood and plastic. Cut-Off wheels make it easy to cut or slot bolts, screws, sheet metal, thin wood and plastic. The cut-off wheel cuts only along its edge. Do not attempt to sand or cut curved holes with them...

This wheel for cutting and shaping on soft and hardwoods, fiberglass, plastics and laminates (not metal). This versatile wheel is coated with tungsten carbide grit for long life. It is coated on both sides, so it cuts and finishes in one operation...

The 545 diamond wheel is completely coated with fine diamond particles for working with hard materials. Designed to be long-lasting and not lose its shape or break, it provides smooth, fine cuts. Great for cutting, sawing and carving of hard materials, such as marble, concrete, brick, porcelain, cer..

Get a drywall bit that makes fast, clean cuts. Our high-speed drywall cutting bit features a 1/8 in steel shank and a piloted tip for easy cutting around outlet and switch boxes. Ideal for cutting drywall for electrical boxes, air vents and other wall features...

Turn your Dremel® rotary tool into a simple-to-use rotary saw. Our 561 high-speed multi-purpose cutter gives you the power to easily cut wood, plastic, fiberglass, drywall, laminate and aluminum and vinyl siding. 1/8 in steel shank...

Our powerful tile cutting tool is ideal for shaping ceramic wall tile around bathroom or kitchen fixtures or plumbing pipes. And if you're feeling creative, you can even use the tool to create a decorative design in your tiles. Just use the tile cutting bit to carve your design, like a sailboat, the..

The Multipurpose Cutting Kit allows for sturdy, controlled cuts in a variety of materials, including drywall, laminate, fiberglass, plastic and vinyl siding. And with its easy screw-on mounting system, you can install the Dremel® cutting kit in seconds. Kit includes a multi-purpose cutting guide, tw..

Get the grout out and make re-grouting a breeze. With our grout removal attachment, you can turn your favorite Dremel® rotary tool into a powerful, electric grout removal machine. Best of all, the attachment's unique shape keeps the bit at the ideal cutting angle and keeps it centered between the ti..

Solid carbide bit removes wall and floor grout 3/8 in below the face surface. Compatible with 275, 285, 395, 381, 398 and 380...

Turn your Dremel® rotary tool into a fast, efficient grout removal tool. Our carbide grout removal bit gives you just the right amount of power to clean out grout lines so you can replace damaged tiles or update your grout...

Whether you're drilling, grinding or cutting, all sorts of hard-to-reach areas become instantly accessible with the Dremel 575 right angle attachment. The quick connect system makes it easy to attach the 575 to the Dremel rotary tool and the coupling system allows you to rotate the right angle drill..

For routing, inlaying and mortising in wood and other soft materials. Use with Dremel® 335-01 plunge router attachment, Dremel® 231 shaper/router table and also older router attachments #230 and #330. Made of high-speed steel...

Our 1/4 in straight router bit makes routing, inlaying and mortising in wood and other soft materials simple. Designed to work with the Dremel 335 plunge router attachment and the 231 shaper/router table. Made of high-speed steel...

This diamond-impregnated core-style bit features great long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360 deg around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the..

This diamond-impregnated core-style bit features great long life and is ideal for drilling in both flat and contoured surfaces. Diamond grit a full 360 deg around the circumference of the bit allows it to be used in a rasping action to enlarge a hole if needed. Holes on the side of the bit allow the..