Browse from the subcategories below
MFG: VULCAN
Model No: 220121OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$7.69
MFG: VULCAN
Model No: 220391OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$8.07
MFG: VULCAN
Model No: 220551OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$9.56
MFG: VULCAN
Model No: 220711OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$10.62
MFG: VULCAN
Model No: 221361OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$12.44
MFG: VULCAN
Model No: 223811OR
Positive tip geometry for best rotary drilling efficiency. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide spiral flutes efficiently remove dust and debris, from the cutting area. Used in applications such as drilling in damp masonry work,..
$4.77
MFG: VULCAN
Model No: 227801OR
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material...
$8.89
MFG: VULCAN
Model No: 227991OR
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material...
$9.09
MFG: VULCAN
Model No: 228101OR
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material...
$10.22
MFG: VULCAN
Model No: 228291OR
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material...
$11.32
MFG: VULCAN
Model No: 228531OR
Hexagonal shanks for sure grip in the chuck. Sharp cutting lip and a wide single spiral flute gives ample clearance for chip flow. Center screw point starts hole and helps pull bits through material...
$14.02
MFG: VULCAN
Model No: 230191OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.11
MFG: VULCAN
Model No: 230271OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a bette grip on the chuck. Jobber length...
$2.20
MFG: VULCAN
Model No: 230351OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.60
MFG: VULCAN
Model No: 230431OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.60
MFG: VULCAN
Model No: 230521OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$6.00
MFG: VULCAN
Model No: 230781OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.31
MFG: VULCAN
Model No: 230861OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.31
MFG: VULCAN
Model No: 230941OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.49
MFG: VULCAN
Model No: 231081OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$2.89
MFG: VULCAN
Model No: 231091OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$6.60
MFG: VULCAN
Model No: 231161OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.09
MFG: VULCAN
Model No: 231241OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.29
MFG: VULCAN
Model No: 231321OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.43
MFG: VULCAN
Model No: 231401OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$3.91
MFG: VULCAN
Model No: 231411OR
Vulcan Jobber Length Drill Bit, 1/4 in Dia, Shank Type: 3-Flat, Quick Change Shank: No, Point Type: Split, Point Angle: 135 deg, HSS, 4 in OAL, Applicable Materials: Ferrous/Non-Ferrous Metal..
$9.29
MFG: VULCAN
Model No: 231591OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$4.26
MFG: VULCAN
Model No: 231671OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$4.86
MFG: VULCAN
Model No: 231751OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.11
MFG: VULCAN
Model No: 231831OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.29
MFG: VULCAN
Model No: 231911OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.46
MFG: VULCAN
Model No: 232051OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$5.60
MFG: VULCAN
Model No: 232211OR
High-speed steel with a 135 deg split point eliminates the need for center punch and keeps drill from skating on hard surfaces. Used to drill most ferrous and non-ferrous metals. All sizes 3/16 in and larger have three flats on the shank for a better grip on the chuck. Jobber length...
$6.35
MFG: VULCAN
Model No: 240660OR
Plastic Case Drill Bit Set includes 21 pieces, sizes: 1/16 - 3/8 in. All sizes 3/16 in and larger have 3 flats on the shank so that the drill chuck gets a better grip on the drill bit...
$34.51
MFG: VULCAN
Model No: 241040OR
Plastic Case Drill Bit Set includes 29 pieces, sizes: 1/16 - 1/2 in. All sizes 3/16 in and larger have 3 flats on the shank so that the drill chuck gets a better grip on the drill bit...
$50.95
MFG: VULCAN
Model No: 242790OR
Plastic Case Drill Bit Set includes 13 pieces, sizes: 1/16 - 1/4 in. All sizes 3/16 in and larger have 3 flats on the shank so that the drill chuck gets a better grip on the drill bit...
$11.60
MFG: VULCAN
Model No: 248561OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$1.16
MFG: VULCAN
Model No: 248641OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$1.33
MFG: VULCAN
Model No: 248721OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$1.38
MFG: VULCAN
Model No: 248801OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$1.47
MFG: VULCAN
Model No: 248991OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$1.73
MFG: VULCAN
Model No: 249021OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$1.91
MFG: VULCAN
Model No: 249101OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$2.11
MFG: VULCAN
Model No: 249291OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$2.22
MFG: VULCAN
Model No: 249371OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$2.31
MFG: VULCAN
Model No: 249531OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$2.93
MFG: VULCAN
Model No: 249881OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.71
MFG: VULCAN
Model No: 250031OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$4.60
MFG: VULCAN
Model No: 250381OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$6.04
MFG: VULCAN
Model No: 250701OR
M-35, 5% cobalt and extra thick drill core for optimum life and durability in hardened steel, super alloys, titanium and stainless steel applications, split point minimizes bit walk. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$8.40