Browse from the subcategories below
Out Of Stock
MFG: TASK TOOLS
Model No: T55058
TASK Rotary Drill Bit, Percussion, 5/8 in Diameter, Spiral Flute, Reduced Shank, 3/8 in Shank Diameter, Carbide Cutting Edge, Carbon Steel, Applicable Materials: Brick, Ceramic Tile, Concrete, Masonry, Stone..
$19.67
Out Of Stock
MFG: TASK TOOLS
Model No: T60038
TASK Drill Bit, Countersink, 3/8 in Diameter, 5 Flutes, 1/4 in Shank Diameter, 82 deg Point, HSS, Applicable Materials: Aluminum, Brass, Copper, Iron, Non-Ferrous Metal, Plastic, Steel, Wood..
$10.98
Out Of Stock
MFG: TASK TOOLS
Model No: T69010
TASK Screw Drill Bit, #10 Diameter, Hex Shank, Quick Change Shank: Yes, 1/4 in Shank Diameter, Pilot Point, Applicable Materials: Composition Board, Plastic, Wood, Suitable for: TASK and Similar 1/4 in Quick-Change Adapters..
$11.62
Out Of Stock
MFG: TASK TOOLS
Model No: T75002
TASK Rotary Hammer Drill Bit, 5/32 in Diameter, 2 Flutes, 4 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$10.14
Out Of Stock
MFG: TASK TOOLS
Model No: T75004
TASK Rotary Hammer Drill Bit, 3/16 in Diameter, 2 Flutes, 4 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$8.26
Out Of Stock
MFG: TASK TOOLS
Model No: T75005
TASK Rotary Hammer Drill Bit, 3/16 in Diameter, 2 Flutes, 6 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 8 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$10.72
Out Of Stock
MFG: TASK TOOLS
Model No: T75019
TASK Rotary Hammer Drill Bit, 1/4 in Diameter, 2 Flutes, 4 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$7.80
Out Of Stock
MFG: TASK TOOLS
Model No: T75035
TASK Rotary Hammer Drill Bit, 1/2 in Diameter, 2 Flutes, 4 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 6 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$12.92
Out Of Stock
MFG: TASK TOOLS
Model No: T75044
TASK Rotary Hammer Drill Bit, 5/8 in Diameter, 2 Flutes, 6 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 8 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$17.56
Out Of Stock
MFG: TASK TOOLS
Model No: T75045
TASK Rotary Hammer Drill Bit, 5/8 in Diameter, 2 Flutes, 10 in Flute Length, SDS Plus Shank, Carbide Cutting Edge, 12 in Overall Length, Applicable Materials: Brick, Ceramic Tile, Concrete, Hollow Core Brick, Roof Tile..
$24.02
Out Of Stock
MFG: TASK TOOLS
Model No: T90732
TASK Drill Bit, 7/32 in Diameter, Split Point, 135 deg Point, HSS, TiN-Coated, Applicable Materials: Aluminum, Brass, Copper, Non-Ferrous Metal, Plastic, Steel, Wood..
$5.60
Out Of Stock
MFG: TASK TOOLS
Model No: T91332
TASK Drill Bit, 13/32 in Diameter, Split Point, 135 deg Point, HSS, TiN-Coated, Applicable Materials: Aluminum, Brass, Copper, Non-Ferrous Metal, Plastic, Steel, Wood..
$16.28
Out Of Stock
MFG: TASK TOOLS
Model No: T92014
TASK Drill Bit, 1/4 in Diameter, Quick Change Shank: Yes, Split Point, 135 deg Point, HSS, TiN-Coated, Applicable Materials: Aluminum, Brass, Copper, Non-Ferrous Metal, Plastic, Steel, Wood, Suitable for: TASK and Similar 1/4 in Quick-Change Adapters..
$8.26
Out Of Stock
MFG: TASK TOOLS
Model No: T92018
TASK Drill Bit, 1/8 in Diameter, Quick Change Shank: Yes, Split Point, 135 deg Point, HSS, TiN-Coated, Applicable Materials: Aluminum, Brass, Copper, Non-Ferrous Metal, Plastic, Steel, Wood, Suitable for: TASK and Similar 1/4 in Quick-Change Adapters..
$6.31
Out Of Stock
Out Of Stock
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF12.625
Tru-Cut LongBoys Drill Bit, Extra Length, 5/8 in Diameter, 9 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 12 in Overall Length..
$48.95
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF12.687
Tru-Cut LongBoys Drill Bit, Extra Length, 11/16 in Diameter, 9 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 12 in Overall Length..
$53.94
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF12.750
Tru-Cut LongBoys Drill Bit, Extra Length, 3/4 in Diameter, 9 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 12 in Overall Length..
$67.41
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF12.875
Tru-Cut LongBoys Drill Bit, Extra Length, 7/8 in Diameter, 6-1/8 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 10-1/4 in Overall Length..
$62.56
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF121.000
Tru-Cut LongBoys Drill Bit, Extra Length, 1 in Diameter, 6-3/8 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 11 in Overall Length..
$80.84
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF18.562
Tru-Cut LongBoys Drill Bit, Extra Length, 9/16 in Diameter, 14 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 18 in Overall Length..
$63.86
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF18.625
Tru-Cut LongBoys Drill Bit, Extra Length, 5/8 in Diameter, 14 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 18 in Overall Length..
$67.75
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF18.750
Tru-Cut LongBoys Drill Bit, Extra Length, 3/4 in Diameter, 14 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 18 in Overall Length..
$87.45
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF18.875
Tru-Cut LongBoys Drill Bit, Extra Length, 7/8 in Diameter, 14 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 18 in Overall Length..
$101.64
Out Of Stock
MFG: SUNSHINE INDUSTRIES
Model No: LF181.000
Tru-Cut LongBoys Drill Bit, Extra Length, 1 in Diameter, 14 in Flute Length, 3-Flat Shank, 1/2 in Shank Diameter, 1-1/4 in Shank Length, 118 deg Point, HSS, 18 in Overall Length..
$118.03
Out Of Stock
MFG: TASK TOOLS
Model No: 09013
Tuf-E-Nuf Drill Bit Set, HSS, TiN-Coated, 13 Piece, Includes: (13) 1/16 to 1/4 in Drill Bits..
$16.11
MFG: VULCAN
Model No: 200951OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$2.90
MFG: VULCAN
Model No: 201091OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$3.20
MFG: VULCAN
Model No: 201681OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$3.35
MFG: VULCAN
Model No: 202571OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$3.73
MFG: VULCAN
Model No: 202651OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$4.18
MFG: VULCAN
Model No: 202731OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$5.53
MFG: VULCAN
Model No: 203380OR
Drill Bit Set includes 21 pieces, 1/16 - 3/8 in . All sizes 3/16 in and larger have 3 flats on the shank so that the drill chuck gets a better grip on the drill bit...
$44.81
MFG: VULCAN
Model No: 203541OR
Negative carbide tip for rotary and percussion drilling. All sizes 3/16 in and larger have 3 flats on the shank so that the chuck gets a better grip on the bit. Wide flutes quickly move out debris and dust. For drilling brick, stone, concrete, ceramic and damp and dry masonry work...
$7.63
MFG: VULCAN
Model No: 211560OR
Drill Bit Set includes 13 pieces, 1/16 - 1/4 in. Super hard coating reduces friction and heat build-up, resulting in extended tool life, lasts up to 6 times longer than standard drills...
$20.51
MFG: VULCAN
Model No: 211990OR
Drill Bit Set includes 21 pieces, 1/16 - 3/8 in. Super hard coating reduces friction and heat build-up, resulting in extended tool life, lasts up to 6 times longer than standard drills...
$55.09
MFG: VULCAN
Model No: 218141OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$2.90
MFG: VULCAN
Model No: 218221OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.10
MFG: VULCAN
Model No: 218301OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.20
MFG: VULCAN
Model No: 218491OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.37
MFG: VULCAN
Model No: 218571OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.40
MFG: VULCAN
Model No: 218651OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.48
MFG: VULCAN
Model No: 218731OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.51
MFG: VULCAN
Model No: 218811OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.78
MFG: VULCAN
Model No: 219031OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$3.72
MFG: VULCAN
Model No: 219381OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$4.53
MFG: VULCAN
Model No: 219541OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$4.63
MFG: VULCAN
Model No: 219701OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$5.60
MFG: VULCAN
Model No: 219971OR
Titanium nitride coating reduces friction and last longer, cutting edge stays sharper longer. Split point eliminates the need for a center punch and keeps the drill from skating. All sizes 3/16 in and larger have three flats on the shank for a better grip on chuck...
$6.33