Browse from the subcategories below
MFG: IRWIN
Model No: 49909
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$11.03
MFG: IRWIN
Model No: 49910
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$11.09
MFG: IRWIN
Model No: 49911
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$11.47
MFG: IRWIN
Model No: 49912
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$11.92
MFG: IRWIN
Model No: 49913
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$13.19
MFG: IRWIN
Model No: 49914
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$13.67
MFG: IRWIN
Model No: 49915
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$14.31
MFG: IRWIN
Model No: 49916
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$14.73
MFG: IRWIN INDUSTRIAL
Model No: 49918
Full length heat-treated bit with wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter. Single spur cutting edge scribes the circumference of the hole, coarse screw point prov..
$19.80
MFG: IRWIN INDUSTRIAL
Model No: 5026000
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$3.20
MFG: IRWIN INDUSTRIAL
Model No: 5026001
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$3.31
MFG: IRWIN INDUSTRIAL
Model No: 5026002
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$3.49
MFG: IRWIN INDUSTRIAL
Model No: 5026003
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$3.87
MFG: IRWIN INDUSTRIAL
Model No: 5026005
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$8.02
MFG: IRWIN INDUSTRIAL
Model No: 5026006
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$5.00
MFG: IRWIN INDUSTRIAL
Model No: 5026008
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$9.20
MFG: IRWIN INDUSTRIAL
Model No: 5026009
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$7.09
MFG: IRWIN INDUSTRIAL
Model No: 5026011
Nickel-plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal. 7/16 in and larger drill bits have reduced shanks...
$11.93
MFG: IRWIN INDUSTRIAL
Model No: 5026012
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$8.54
MFG: IRWIN INDUSTRIAL
Model No: 5026013
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$12.48
MFG: IRWIN INDUSTRIAL
Model No: 5026015
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$10.28
MFG: IRWIN INDUSTRIAL
Model No: 5026016
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$14.41
MFG: IRWIN INDUSTRIAL
Model No: 5026019
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$12.67
MFG: IRWIN INDUSTRIAL
Model No: 5026020
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$16.64
MFG: IRWIN INDUSTRIAL
Model No: 5026021
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$16.86
MFG: IRWIN INDUSTRIAL
Model No: 5026022
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$23.03
MFG: IRWIN INDUSTRIAL
Model No: 5026023
Nickel plated for fast, smooth performance. Carbide tip can be used for rotary drilling applications also for deep drilling. Slow spiral for quick and easy debris removal, 7/16 in and larger drill bits have reduced shanks...
$23.77
MFG: IRWIN INDUSTRIAL
Model No: 5026024
High speed steel drill bits used in masonry applications. Includes one of each 3/16 in, 1/4 in, 5/16 in, 3/ 8 in, 1/2 in and molded plastic case...
$20.84
In Stock
MFG: IRWIN INDUSTRIAL
Model No: 60105
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$1.47
Out Of Stock
MFG: IRWIN INDUSTRIAL
Model No: 60107
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$1.40
Out Of Stock
MFG: IRWIN INDUSTRIAL
Model No: 60113
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$2.18
Out Of Stock
MFG: IRWIN INDUSTRIAL
Model No: 60114
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$2.49
Out Of Stock
MFG: IRWIN INDUSTRIAL
Model No: 60115ZR
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.24
Out Of Stock
MFG: IRWIN INDUSTRIAL
Model No: 60118
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$4.20
Out Of Stock
MFG: IRWIN INDUSTRIAL
Model No: 60120
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$5.20
MFG: IRWIN INDUSTRIAL
Model No: 60136
Bits are constructed of M-2 high-speed steel for strength, heat and wear resistance. Standard 118 deg point for use in wood, metal and plastic. Includes 1/16 in through 1/4 in in 1/64 in increments in a metal index case...
$20.78
MFG: IRWIN INDUSTRIAL
Model No: 60137
High speed steel for use in metal, wood and plastic in applications such as automotive, MRO, stationary drill press, 118 deg conventional point with bright finish. Jobber length. Includes: bits range from 1/16 in through 1/2 in by 32nds, metal index for safe storage...
$56.81
MFG: IRWIN INDUSTRIAL
Model No: 60148
Made of M-2 high-speed steel for strength, heat and wear resistance. Standard 118 deg point for use in wood, metal and plastic, 3/8 in reduced shank fits all 3/8 in drills, jobber length. Includes bit sizes: 1/16 in through 1/2 in in 1/64 in increments and metal index case...
$112.66
MFG: IRWIN INDUSTRIAL
Model No: 60221ZR
Made of M-2 high speed steel for strength, heat and wear resistance. Standard 118 deg point used in applications such as wood, metal and plastic. Includes bits of size 1/16 in through 3/8 in in 1/64 in increments and metal index case...
$50.50
MFG: IRWIN INDUSTRIAL
Model No: 60504
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$2.74
MFG: IRWIN INDUSTRIAL
Model No: 60505
Irwin Jobber Drill Bit, 5/64 in Dia, Flute Type: Spiral, Flute Length: 1 in, Shank Type: Straight, Shank Diameter: 5/64 in, Point Type: Chisel, Point Angle: 118 deg, M-2 Grade, Cutting Edge Material: HSS, HSS, 1-11/16 in OAL, Cutting Direction: Right Hand, Applicable Materials: Metal, Plastic, Wood..
$2.83
MFG: IRWIN INDUSTRIAL
Model No: 60506
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.29
MFG: IRWIN INDUSTRIAL
Model No: 60507
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.40
MFG: IRWIN INDUSTRIAL
Model No: 60508
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.54
MFG: IRWIN INDUSTRIAL
Model No: 60509
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.09
MFG: IRWIN INDUSTRIAL
Model No: 60510ZR
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.14
MFG: IRWIN INDUSTRIAL
Model No: 60511
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$3.40
MFG: IRWIN INDUSTRIAL
Model No: 60512
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$4.00
MFG: IRWIN INDUSTRIAL
Model No: 60513
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$4.14
MFG: IRWIN INDUSTRIAL
Model No: 60514
High-speed steel bits used for general-purpose drilling in wood, metal and plastic. Jobber length...
$4.43