Burcam 101 Deep-Well Submersible Pump, 1-1/4 x 4 in Connection, NPT Connection, 230 V, 5 A, 0.5 hp, 10 gpm, 80 psi, Motor Type: Continuous-Duty, Maximum Head: 225 ft, Number of Stages: 9, Stainless Steel, Includes: Control Box..
Burcam Submersible Well Pump, 4 x 1-1/4 in Connection, NPT Connection, 230 VAC, Frequency Rating: 60 Hz, Number of Phases: 3, 0.75 hp, 10 gpm, 20 to 50 psi, Maximum Head: 275 ft, Number of Stages: 12, Stainless Steel, Includes: Control Box..
The jet pumps, for the shallow well (up to 25 ft of suction lift) or convertible for the deep well (up to nearly 85 ft of suction lift for some models), are available in various series from cast iron to thermoplastic as well as stainless steel. Powered by motors of 1/2 to 1 hp, in addition to factor..
The jet pumps, for the shallow well (up to 25 ft of suction lift) or convertible for the deep well (up to nearly 85 ft of suction lift for some models), are available in various series from cast iron to thermoplastic as well as stainless steel. Powered by motors of 1/2 to 1 hp, in addition to factor..
1/3 hp 115 V thermoplastic zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer. Noryl® impeller, tether float switch, thermal and overload protection, 9 ft grounded electric cable, oil cooled motor for a better perfor..
Oil-cooled motor 1/2 hp continuous duty, with automatic thermal overload protection. Pump body made of cast iron and stainless steel. High flow rated, 1-1/2 in NPT discharge with 1-1/4 in reducer included. Noryl® vortex impeller, clog-free type (non-corrosive), automatic vertical float switch USA ma..
1/3 hp 115 V heavy-duty cast iron and zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer, Noryl® impeller, piggyback tether float switch, easy to adjust. Thermal and overload protection, 9 ft grounded electric cable,..
1/2 hp 115 V Heavy-duty cast iron and zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. Submersible sewage pump. 2 in discharge and 2 in handling capabilities, 15a. vortex design impeller, made from glass filled Noryl®, standard mechanical seal made from stain..
Cast iron convertible jet pump. SW operation 0 to 25 ft with ejector screwed on pump body. DW operation 0 to 80 ft with 2 pipes and ejector down in the well. High performance Noryl® impeller, industrial motor totally enclosed, fan cooled. full time connected run capacitor, to eliminate starting wear..
Stainless steel pump housing, easy to prime, totally enclosed fan cooled motor, up to 900 gph, up to 65 psi. Maximum vertical suction lift of 25 ft, high performance Noryl® impeller and built-in ejector, stainless steel rotor shaft and mechanical seal. 18 lb (8.18 kg)...
3/4 hp stainless steel pressure booster/tankless jet pump system. Water supply pressure booster can be used to increase and maintain municipal water pressure. Tankless shallow well jet pump to deliver constant pressure without annoying pressure fluctuations. Eliminates need for pressure switch or ta..
Stainless steel. 6.6 gal tank, easy to prime, totally enclosed fan cooled motor, up to 900 gph, up to 65 psi, maximum vertical suction lift of 25 ft, high performance Noryl® impeller and built-in ejector. Pre-assembled for quick easy installation...
The jet pumps, for the shallow well (up to 25 ft of suction lift) or convertible for the deep well (up to nearly 85 ft of suction lift for some models), are available in various series from cast iron to thermoplastic as well as stainless steel. Powered by motors of 1/2 to 1 hp, in addition to factor..
80 L free-standing captive air pressure tank. 100 psi maximum working pressure (tested to 150 psi). No water/air contact. Rust-free operation. no air volume control needed and no waterlogging. 80 L (20 gal) capacity with 7.5 gal of draw-down performance, over a 42 gal galvanized tank. 1 in MNPT conn..
1/2 hp 115 V thermoplastic zinc motor housing dissipates heat quickly and stops premature rust to extend motor life. 1-1/2 in NPT discharge with 1-1/4 in reducer. Noryl® impeller, independent piggyback tether float switch, thermal and overload protection, 9 ft grounded electric cable, oil-free motor..
Prevents heat escape through the inlet and outlet when flow stops. Color coded cold inlet and hot outlet. Meets AGA requirements. Self-cleaning fittings prevent corrosion. Dielectric insert thermoplastic lining. 3/4 in MPT x 3/4 in MPT x 3 in L MIP...
Camco USA RV 1500 W universal element is designed to replace the heating element in your RV water heater. This UL recognized HWD replacement kit has a screw-in style flange. Gasket and complete instructions are included...
Camco USA's 4500 W 240 V screw-in type low watt density water heater elements are better suited for areas with problem water. Most LWD elements are a fold-back style and provide no loss of efficiency yet reduce lime deposit buildup. This screw-in element has 1-3/8 in thread and is made for state Ind..
Camco USA's 4500 W/240 V screw-in foldback type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits and the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to..
Camco USA's 4500 W/240 V screw-in ripple type ultra-low watt density water heater elements are better suited for areas with problem water. The ultra LWD of this element helps prevent lime deposits d the high-performance nickel-chromium stainless steel alloy sheath gives it additional strength to res..
Camco USA 1500 W universal element is designed to replace the heating element in your water heater. This UL recognized HWD replacement kit has a universal style flange. Gasket and complete instructions are included...
Contains (1) 2-1/2 in 4-bolt, (1) screw-in gasket adapt-a-flange, (1) thermostat bracket, (1) four hole gasket and (4) 5/16 in to [no. 18] 5/8 in hex bolt-washers. Use a standard screw-in element to replace a flat, universal or round flange element using the element conversion kit...
The Camco USA Apcom style lower thermostat features a single pole with a built-in safety switch that prevents overheating. The temperature range is adjustable from 110 to 160 deg F, adjust only the lower thermostat...
UL listed. Meets original specification length for State, Reliance, Kenmore, Bradford White. Energy efficient range setting, built-in safety switch to prevent overheating...