METAL ELECTRICAL BOXES

Raco Switch Box, Cable Entry: Knockout, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 7 in H x 2.563 in W x 3.5 in D, Steel, Gray, Bracket Mounting, Suitable for: Switches, Outlet, Includes: TS Side-Mount Bracket with Gauging Tabs, Recessed ..

Orbit Industries 2-1/2 in deep gangable switch boxes are used in the installation of switches. Orbit Industries includes a variety of gangable switch boxes with non-metallic cable clamps, metal clad cable clamps and old work tigergrips. The wide tigergrip design is a non-gangable, wide old-work swit..

Four cable knockouts (ends). One 1/2 in conduit knockout (bottom). With clamps for non-metallic sheathed cable. "S" backset. Mounting guides set 3/8 in, with bumps. Angle nail type. 3 in x 2 in x 2-27/32 in deep, 15.8 cu-in capacity. Prepositioned mounting nails included. Acceptable for use in 2 hrs..

Conduit wiring system. Four 1/2 in conduit knockouts (sides). Two 1/2 in conduit knockouts (end). Two 1/2 in conduit knockouts (bottom). Less clamps. 3 in x 2 in x 2-1/2 in D. 12.5 cu-in. Acceptable for use in 2 hrs rated fire walls. UL listed...

One 1/2 in bottom and two 1/2 in end conduit knockouts and four cable knockouts. With armored cable/metal clad/flex clamps. TS brackets for wood or metal studs, with 1/2 in setback. Gauging tabs and recessed nailing spur, less ears. Acceptable for use in 2 hrs rated walls. 2-1/2 in D. 12.5 cu-in. UL..

Raco Switch Box, Cable Entry: Knockout, Number of Outlets: 1, Number of Knockouts: 7, Knockout Size: 1/2 in, Number of Gangs: 1, Cubic Capacity: 18 cu-in, Dimensions: 4.219 in H x 2.25 in W x 3.5 in D, Steel, Gray, Pre-Galvanized, Suitable for: Switches, Outlet, Includes: Plaster Ear..

Add-A-Depth ring or "goof ring" is designed to act as a barrier between combustible wall surfaces and the wiring system. This product can be used for single or two-gang device boxes that are set too deep in the wall...

Orbit Industries gangable switch boxes with beveled corners are used in the installation of switches and other devices in shallow walls. They are constructed from 16 ga galvanized steel. Non-metallic clamps are installed through the beveled corners for ease of installation. Selected models include b..

Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily remova..

Bracket clips on any stud. Securing the bracket to the stud ensures that the box will not move. The box snaps into place on the bracket, square and secure every time. Then turning the screw clockwise or counterclockwise adjusts the box in or out to make it flush with any wall covering. Easily remova..