Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
MFG: HOPKINS
Model No: 90110
Make a comfortable, sturdy bench and a table up to 8 ft long. Just add 2x4 lumber pieces. Flips and locks from a bench to a table in seconds without using tools. Slide lock safely secures and locks in position. Made of maintenance-free structural resin. Use only one or slide two Bench Tables togethe..
$93.04
MFG: HOPKINS
Model No: 90128
You can determine the size and configuration, just add 2x4's to the ShelfLinks to make functional and custom shelving in any length, height and configuration. Made of structural resin. Can support spans up to 8 ft. Includes ShelfLinks, hardware and instructions. Lumber not included...
$57.32
MFG: HOPKINS
Model No: 90158
Create a workbench, worktable or power tool stand. Add 2x4's plywood or particleboard to make a workbench, worktable or power tool stand in any length or width up to 8 ft L x 4 ft W. Simple assembly in less than an hour with only powered screwdriver and a saw. Only straight, 90 deg cuts required, no..
$110.02
Out Of Stock
MFG: HOPKINS
Model No: 90166
You determine the size. Connect with railing brackets with 2x4 and 2x6 lumber to easily add a bench to any size or shape deck. Gain increased seating area while using only 7 in of deck space. Assembled unit stands 36 in H for deck railing, seat is 17 in H. Quick and easy to assemble using basic tool..
$38.49
Out Of Stock
MFG: HOPKINS CANADA
Model No: 90190MI
2x4basics Barn Roof Shed Kit, Includes: Building Plans, Complete Materials List, Galvanized Steel Angle Brackets and Galvanized Steel Stud Brackets..
$165.45
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
MFG: GRABBER CONSTRUCTION
Model No: DMP100-10
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form ..
$64.68
MFG: GRABBER CONSTRUCTION
Model No: DMP100-100
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form ..
$479.14
MFG: GRABBER CONSTRUCTION
Model No: DMP125-10
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form ..
$67.00
MFG: GRABBER CONSTRUCTION
Model No: DMP125-100
When using the Grabber Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Grabber Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form ..
$479.14
MFG: GRABBER CONSTRUCTION
Model No: DMP175-10
When using the Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener ..
$67.00
MFG: GRABBER CONSTRUCTION
Model No: DMP175-100
When using the Deckmaster fastening system, all fasteners are hidden beneath the deckboards. There is no surface penetration of the deckboards or joists. With Deckmaster there are no exposed screws a primary entry point for moisture and deck board damage. No stains or splinters form around fastener ..
$479.14
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
Out Of Stock
MFG: PYLEX
Model No: 12090
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed i..
$14.42
Out Of Stock
MFG: PYLEX
Model No: 12091
Made from standard tarred roof paper, this impermeable band prevents wood decay. Larger than the simple joist, it diverts water to each side. Offers maximum protection for your deck. Do not waste anymore energy or time cutting bands from a large roll of 48 in (for the roof). This band is installed i..
$19.05
Out Of Stock
MFG: PYLEX
Model No: 14300
Add a bench to a patio, balcony or quay so as to improve outside areas. It fits with all styles of terraces. Only model that uses 5 in of floor space, it provides an extra storage space below the bench. Its steel, welded in one piece and baked powder coating structure, provides durability and stabil..
$36.94
MFG: SIMPSON STRONG-TIE
Model No: PMANDREL75-RC
Keep your Quik Drive auto-feed screw driving system in ideal condition with these Simpson Strong-Tie® replacement parts...
$18.58
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 1/2HDG
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coatin..
$1.95
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 1/2-3
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coatin..
$2.62
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 5/8
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coatin..
$1.44
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 5/8-2
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coatin..
$1.22
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 5/8-3
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coatin..
$2.62
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 5/8-3HDG
The BP is designed to provide a greater bearing surface than standard cut-washers and help distribute the load at critical connections. This bearing plate works by transferring concentrated compressive forces between two structural elements. The BP is available with a hot-dip galvanized (HDG) coatin..
$4.55
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BPS 1/2-3HDG
The BPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This bearing plate features a slotted hole that allows for adjustability to account for bolts that are not in the middle of the sill plate. The BPS offers increase..
$5.60
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BPS 5/8-3HDG
The BPS is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This bearing plate features a slotted hole that allows for adjustability to account for bolts that are not in the middle of the sill plate. The BPS offers increase..
$6.11
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: BP 1/2
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections...
$1.04
MFG: SIMPSON STRONG-TIE
Model No: CNW3/4
The CNW is designed to connect threaded rods to one another and to anchor bolts. These coupler nuts are designed to exceed the specified minimum tensile capacity of the corresponding bolts and threaded rod. All CNW coupler nuts feature a positive stop to help ensure even threading into each end of t..
$4.53
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: CNW5/8-R
The CNW is designed to connect threaded rods to one another and to anchor bolts. These coupler nuts are designed to exceed the specified minimum tensile capacity of the corresponding bolts and threaded rod. All CNW coupler nuts feature a positive stop to help ensure even threading into each end of t..
$4.46
MFG: SIMPSON STRONG-TIE
Model No: HTT4
The HTT is a high-strength solution for resisting tension loads in post-pour, wood-to-concrete connections. This heavy, single-piece formed tension tie is fastened with nails or Strong-Drive® SD Connector screws. The HTT has a four-ply formed seat and a design without rivets that does not require wa..
$28.54
MFG: SIMPSON STRONG-TIE
Model No: HTT5
The HTT is a high-strength solution for resisting tension loads in post-pour, wood-to-concrete connections. This heavy, single-piece formed tension tie is fastened with nails or Strong-Drive® SD Connector screws. The HTT has a four-ply formed seat and a design without rivets that does not require wa..
$29.16
MFG: SIMPSON STRONG-TIE
Model No: LBP1/2
The BPS and LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2 x 4 and 2 x 6 walls. The slotted hole allows for adjustability to account for bolts that are not in the middle of the sill plate...
$1.01
MFG: SIMPSON STRONG-TIE
Model No: LBP1/2Z
The LBP is designed to provide a greater bearing surface than standard-cut washers and help distribute the load at critical connections. This light bearing plate works by transferring concentrated compressive forces between two structural elements. The LBP features a galvanized finish for extra corr..
$1.32
MFG: SIMPSON STRONG-TIE
Model No: LBP5/8
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections...
$1.01
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: LBP5/8Z
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections...
$1.37
Out Of Stock
MFG: SIMPSON STRONG-TIE
Model No: LBPS1/2
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections. The LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2 x 4 and 2 x 6 walls. The slotted hole allows for adju..
$2.21
MFG: SIMPSON STRONG-TIE
Model No: LBPS 1/2Z
Bearing plates give greater bearing surface than standard-cut washers and help distribute the load at these critical connections. The LBPS are bearing plates that offer increased flexibility while meeting the latest requirements of the code for 2 x 4 and 2 x 6 walls. The slotted hole allows for adju..
$3.16