JOHN GUEST USA

An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide...

An innovative push-fit fitting which allows pipe runs to be branched off an existing pipe run without effect to existing pipe setup. An ideal tool should radiators or other application types need to be added within a refurbishment project...

An innovative push-fit fitting which provides a quick and easy method of replacing burst or damaged pipe without the need to alter existing pipe work. See below for a step by step installation guide...

An innovative push-fit fitting which allows pipe runs to be branched off an existing pipe run without effect to existing pipe setup. An ideal tool should radiators or other application types need to be added within a refurbishment project...

The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers and many more. The valves are not to be used wi..

The ASVPP range is offered in white polypropylene with food-grade EPDM O-ring. The valve connects between your valve and riser, to the main water supply line, for applications in reverse osmosis, filtration systems, automatic coffee brewers, ice-makers and many more. The valves are not to be used wi..

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the ne..

The coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. It can be installed by simply pushing the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the ne..

The reducer fitting ensures an easier working environment in confined places, is approved for behind the wall installations and removes the need for hot works on site. Installation can be reduced by around 40% when compared to traditional fixing methods. To install the reducer, simply push the fitti..

The reducing coupler is a push-fit plastic fitting for the connection of plastic, copper and CPVC pipe. It was designed, manufactured and assembled by John Guest Speedfit. To install, simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need ar..

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation...

Simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working environment in conf..

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation...

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out-of-the-wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment...

Fittings manufactured in white polypropylene with food-grade EPDM O-ring. For use in out of the wall applications such as connecting ice makers, water treatment equipment, automatic coffee equipment. Size indicated is end x end x branch...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications...

The polypropylene range of inch-size push-in fittings is offered for tube sizes 1/4 to 1/2 in OD. The fittings are manufactured in white polypropylene with food-grade EPDM O-ring. They have been developed to satisfy the filtered pure water market and wide range of applications...

Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems...

Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems...

Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube O..

Reverse Osmosis storage tank valve. Produced in polypropylene and fitted with EPDM O-ring, more chemical-resistant than acetal. Use in potable water applications. Not to be used with compressed air, explosive gases, petroleum spirits and other fuels or for heating systems. Sizes indicated are Tube O..

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on t..

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on t..

The speed-fit secure range of fittings including the male connector ensures a secure connection when adapting Speedfit pipe or copper to threaded applications. To install, always use PTFE tape when preparing thread, working up the full thread length. The fitting can be tightened using a spanner on t..

The female connector is from the Speedfit secure range of fittings that ensure a secure connection when adapting Speedfit pipe or copper to threaded applications. To lock pipe in place, push the pipe into the fitting and turn the nut clockwise. Should the need arise to release the pipe, turn the loc..

Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end cap provides a leak-proof seal and..

Push-fit fitting for the connection of plastic, copper and CPVC pipe. Designed, manufactured and assembled by John Guest Speedfit. A must for any tool bag. The unique feature of the Speedfit concept, the ability to disconnect the fitting at will, means that the end cap provides a leak-proof seal and..

John Guest Pipe Connector, Nominal Size: 1/2 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe..

John Guest Pipe Connector, Nominal Size: 3/4 in, CTS Connection, 160 psi, Operating Temperature: 200 deg F, Plastic, Suitable for: CPVC, Copper and PEX Pipe..

PUSH FIT UNION ELL 1/2CTS..

PUSH FIT ELBOW 1/2 X 1/2MNPT..

It requires you to simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working ..

It requires you to simply push the fitting fully onto the pipe and twist the plastic nut clockwise to lock in place. Should the need arise to demount the connection unlock the nut and push the collet towards the body of the fitting and pull the pipe to release. The fitting ensures an easier working ..

Twist and Lock manufactured from high-quality engineered plastic with EPDM O-ring. Suitable for hot and cold water plumbing applications. Can be used with copper, PEX and CPVC pipe. Approved for behind the wall installation...