EPOXY ADHESIVES

PC-LUMBER™ epoxy putty is pre-measured and mixed by hand. It is used as a filler where a small amount will solve the problem. Within 60 mins it is cured and ready. The putty can be easily formed and shaped...

PC-MARINE™ epoxy putty stick is a specially formulated epoxy putty suitable for wet or underwater applications. Incredibly it has an extended open time (20 to 30 mins) but cures hard within 60 mins for a fast return to service and emergency repairs. It sticks great to metals, fiberglass, tile, wood ..

PC-METAL™ putty epoxy replaces metal. Mix with fingers and apply. Quickly PC-METAL™ cures to re-attach metal (30 mins). Cures hard, fast, non-conductive. Contains metal, sticks to metals such as cast iron, zinc, aluminum, stainless steel, steel and copper...

PC-SUPEREPOXY® is a non-drip translucent paste epoxy suitable for conventional or static mixing. It has unlimited uses in bonding, assembling, filling and sealing most materials. Unlike conventional liquid epoxies, PC-SUPEREPOXY® can be applied via a static mix nozzle vertically and overhead. It cur..

PC-WOODY® is a two-part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood. Sand, drill, nail, prime and paint or stain. Bonding filler for replacement wood. Not brittle...

PC-WOODY® is a two-part epoxy paste that is excellent for filling cavities in wood. Make permanent repairs without shrinking, cracking or popping out of exterior wood. Sand, drill, nail, prime and paint or stain. Bonding filler for replacement wood. Not brittle...

Quikrete® high strength anchoring epoxy is a two-component, high modulus, structural epoxy with an extended working time of approximately 20 mins at 77 deg F, Quikrete® high strength anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar ..

Quikrete® FastSet™ anchoring epoxy is a gray solvent-free, low-odor, high strength, moisture insensitive, non-sag epoxy. Quikrete® FastSet™ anchoring epoxy is ideal for vertical or horizontal applications, including anchoring bolts, threaded rods and rebar dowels into concrete and masonry substrates..

Red Head A7+ is a high-strength, fast-cure adhesive that is designed to securely anchor threaded rod and rebar to cured concrete and masonry. A7+ is one of the most versatile anchoring solutions on the market, suitable for use in an extremely wide range of applications and environmental conditions...

Sika® AnchorFix-1 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete...

Sika® AnchorFix-2 adhesive anchoring system has been specially formulated as a high-performance, two-component adhesive anchor system for threaded and reinforcing bars in uncracked concrete...