80950 ADJ HCKSW FRM #7 10-12"

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left ..

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left ..

Straight tang. File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 deg to 45 deg with saw. Sharpen all left ..

File from inside to outside of cutter. Place file against beveled cutting surface of teeth 20 to 45 deg with saw. Sharpen all left hand cutters on one..

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfa..

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfa..

The Crescent Nicholson half-round double-cut bastard files are ideal for materials containing iron, mild steel, plastics and wood. The coarse grade is..

Rounded on one side, flat on opposite, flat sides of all half-round files are double cut, backs are double cut. Used on concave, convex and flat surfa..

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the po..

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the po..

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the po..

Made for filing saws with 60 deg angle teeth. Triangular shape, edges set and cut for filing gullets between saw teeth, tapers slightly towards the po..

Plain horse rasps are double-ended with rasp teeth on one side, file teeth on opposite side, rectangular shape. Thin fine-toothed rasp for shoeing rac..

Maximum cutting surface gives rapid removal and smoother finish. Opposite side has the Nicholson Magicut® file pattern that are narrow chip breakers c..

Half round shape and has file section and rasp section on both flat side and half-round side. For the homeowner, home craftsman, boat builder and mech..

For use on wood and soft metals. Used by woodworkers, hobbyists and plumbers...

Single cut file teeth on edge for use on wood and soft metals. Used by woodworkers, hobbyists and plumbers...

File card and brush. Especially for use on finer cut files...

Interchangeable cushion inserts designed to fit most popular files. Handle made of strong high-impact material. Contoured to fit hand for straight, la..

Rectangular shape, single cut on sides and edges, two square edges, red handle, all sizes taper slightly in width. Used for sharpening mill or circula..