206840 ADJ RF FLASH24-36/12 6"

FLASHING ROOF 8IN ADJ 6-12/12..

Selkirk Bird Proof Round Top..

Selkirk Roof Flashing, Aluminum/Galvanized Steel, 16 in OAL, 13-1/4 in OAW, Suitable for: 4 in Dia Pipe..

This new design gives you the flexibility of securing the 5, 6, 7 or 8 in Dia chimney with a heavy-duty band. The band allows you to slide the install..

Selkirk Flashing Kit, Rubber, Suitable for: 5 to 8 in Dia Chimney, Includes: 23-4/5 x 21-1/2 in Rubber Boot, Mounting Screws, Spacers Kit, Special Sto..

Fits all roof pitches and requires only simple framing. Brackets and mounting hardware only...

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specif..

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specif..

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specif..

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specif..

Used to start chimneys indoors or outdoors using a wall support assembly or a masonry pier. A length of insulated chimney pipe is attached to the tee ..

The Selkirk Chimney System (SCS) is ideal for venting residential heating appliances burning wood, 2-oil and natural and LP gas. They have been specif..

Can be used for fixed offsets of 15 deg slope or in pairs for offsets adjustable from zero to 30 deg slope. Greater angles are prohibited by UL standa..

Can be used for fixed offsets of 30 deg slope. Greater angles are prohibited by UL Standard 103 and by the terms of the product listing. Required Lock..

Selkirk Drip less Smoke Stove Pipe Adapter, 430 Stainless Steel, Dimensions: 15-3/4 In L..

Provides a secure attachment for the chimney to smoke chamber outlet on masonry fireplaces, reducing footing loads and speeding construction. Stainles..

Contains one 18 in length of pipe, roof brackets and necessary hardware. Not for use with coal burning stoves...

The Type HT wall support kit has been tested for use fully enclosed and has been designed in 5, 6, 7 and 8 in sizes to carry up to 60 ft of height at ..

Interior resupport assembly allows for two different methods of chimney resupport. The first method is used at the immediate section of chimney above ..

Used whenever there is a need to stabilize the chimney above the roof level. The purpose of the bracing is to hold the chimney against wind load and t..