NON METAL ELECTRICAL BOXES

Eccentric knockouts, non-metallic and non-conductive. Can be mounted to wood or steel studs. 3.53 in H x 2.10 in W x 3-1/4 in D...

Combination two-gang/four square box. Eccentric knockouts, non-metallic and non-conductive...

Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in ..

Non-metallic, non-conductive. Punch type knockout. Quickly connects. Square, fits commercial and residential requirements. For 600 V use in ceilings, floors and walls in commercial, industrial and residential buildings not more than three floors above grade. Colored in brilliant electric blue. 3 in ..

New work applications, shallow PVC switch box. Integral brackets. 1-1/4 in D x 2-3/8 in x 3-5/8 in. UL listed...

Designed and listed for use with non-metallic sheathed cable. With mounting ears. Permissible for use with 90 deg C connectors. 8 cu-in capacity. 1-1/4 in x 2-3/8 in x 3-5/8 in. UL listed...

Old work wall case. Safe, non-conductive. Two zip-mount retainers. Four integral clamps, two each end, mounting ears. 14 cu-in, 2-3/4 in x 2-1/4 in x 4-1/8 in. UL listed...

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies...

Safe, non-conductive. With bracket for 3/8 to 5/8 in wallboard. Steel and wood studs, 4 knockouts. 2-15/16 in D x 3-3/4 in x 2-1/4 in...

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies...

With mounting ears and swing bracket. 4 integral clamps, 2 each end. UL listed, meets NEMA OS-2. Suitable for masonry walls, not UL Classified for Fire Resistance. PVC construction. 20 cu-in capacity. 3-5/8 in D x 2-5/16 in x 4-1/8 in...

Provides simple installation and allows adjustment from 0 to 1-3/4 in with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes preset at 1/2 in. 3-3/8 in D x 3-7/8 in x 3-3/4 in...

With captive nails. Four integral clamps, two each end. Meets NEMA OS-2, UL listed, classified for fire wall assemblies...

Extends an existing box by 1-1/8 in. Used to correct problems from remodeling where the wall surface is extended. Fits between the wiring device and the wall surface. Extends the switch or outlet box to flush with the wall. Works with all standard wiring devices. 2-1/4 in x 3-1/4 in. UL listed...

With mounting ears and 2 swing clamps. Suitable for masonry walls, UL listed, not UL Classified for fire resistance. 2-3/4 in D x 3-1/8 in x 3-15/16 in...

New work safe, non-conductive. With captive nails. Eight integral clamps, four each side. 32 cu-in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies. 3 in D x 4 in x 3-3/4 in...

Patented design provides simple, goof-proof installation and allows the installer to adjust the box to any thickness with the turn of a screw. Clip the included bracket onto any stud, mounts square and secure every time. Securing the bracket to the stud ensures that the box will not move. Comes pres..

With captive nails and bracket support, twelve integral clamps, six each side. 44 cu-in capacity, 2-11/16 in D x 3-3/4 in x 5-5/8 in. Meets NEMA OS-2, UL listed, classified for fire wall assemblies...

Extra large box. 6 clamps to hold cable, swing out clamps to hold to the wall. Engraved with NEC approved conductor fill. 13 in x 6-1/4 in x 8 in. UL listed...

Safe, non-metallic, non-conductive. Molded instructions. 12 integral clamps, 6 each side. Bracket and captive nails included. 2-1/2 in D x 3-7/10 in x 7-3/5 in...

Workbox can accommodate three and four large wiring devices. Installs easily for existing construction remodeling work. 8 clamps securely hold cable. Swing out clamps lock box securely to wall. Lightweight and durable and engraved with NEC approved conductor fill. Suitable for masonry walls. 68 cu-i..

Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds s..

Lightweight design and durable plastic. Listed for masonry walls. Safe to install and will never rust or corrode. Includes nails for quick, easy installation. 22 cu-in rigid wall. 3-7/8 in x 2-3/8 in x 3-3/4 in. UL listed...

Lightweight, noncorrosive and nonconductive, rigid, non-metallic wiring box combines features of hard shell thermoset box and thermoplastic PVC style box. Molded of specially formulated, strong thermoplastic material, will not crack or break, even in extreme environments. Resists flexing and holds s..

PVC handy box used for many wiring applications. Weather-resistant and non-conductive. Will accept metal handy box covers or non-metallic covers. 35 cu-in rigid wall...

Lightweight design and durable plastic. Safe to install and will never rust or corrode. Includes hardware for easy installation. Rigid wall box...

Rigid wall box. Lightweight design and durable plastic. Safe to install and will never rust or corrode. Allows for large wiring devices (GFIs and dimmers). Includes hardware for easy installation...

Enables line voltage and low-voltage to run to the same location. Uses standard 2-gang faceplate. Backless design accommodates large/deep low voltage devices. 3.69 in x 4.04 in. 20.5 cu-in capacity. UL approved...

Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed...

Thermoset fiberglass with angled mid-nails. Nails are installed as fastening devices. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. UL listed...

Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 4 in x 3-3/4 in. UL listed...

Thermoset fiberglass with angled mid-nails, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 3 in x 5-11/16 in x 3-3/4 in. UL listed...

Thermoset fiberglass with ears, wing brackets and speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-3/4 in x 4-1/8 in x 3-1/4 in. 2 hrs wall fire rating. UL listed...

Thermoset fiberglass with ears, wing brackets, speed clamps. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2 hrs wall fire rating. 2-7/8 in x 5-15/16 in x 3-1/4 in. UL listed...

fiberglassBOX Switch/Outlet Box, Knockout Cable Entry, 2 Outlets, 4 Knockouts, 1 Gangs, Rectangular Shape, 16 cu-in, Dimensions: 3-1/4 in H x 2-3/8 in W x 2-7/8 in D, Fiberglass/Polyester, Off-White, Bracket Mounting..

Thermoset fiberglass with ears, wing brackets, speed clamps. 2 hrs wall and ceiling fire rating. Lightweight, non-corrosive, non-conductive, no ground required. Will not melt or distort in high heat. Shatter-resistant in cold temperatures. 2-7/8 in x 2-3/8 x 3-1/4. UL listed...

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 8, Number of Gangs: 2, Square, Cubic Capacity: 32 cu-in, Dimensions: 3-5/8 in H x 4 in W x 3 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes: Ca..

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 18 cu-in, Dimensions: 3.625 in H x 2.3125 in W x 2.75 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Racew..

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 20 cu-in, Dimensions: 3.3 in H x 2.4 in W x 4.2 in D, PVC, Gray, In-Wall, Nail Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, In..

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Knockout, Number of Knockouts: 6, Number of Gangs: 2, Rectangular, Cubic Capacity: 25 cu-in, Dimensions: 4-3/8 in H x 4 in W x 2-3/4 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includ..

GB Switch/Outlet Box, Outlet Type: Standard, Cable Entry: Hinge, Number of Knockouts: 4, Number of Gangs: 1, Rectangular, Cubic Capacity: 14 cu-in, Dimensions: 4.38 in H x 2.25 in W x 2.75 in D, PVC, Gray, In-Wall Mounting, Suitable for: Non-Metallic Sheathed Cable and Non-Metallic Raceway, Includes..