Dasco Pro 564-0 Solid Punch, 1/8 in Tip, 5 in L, HCS

More from this category

265RBM MED/FINE SAW BLADE 10.5

$16.31

332-0 MASONRY CHISEL 1-1/4"

$11.85

333-0 MASONRY CHISEL 1-3/4"

$12.37

400-0 COLD CHISEL 1/4X4-7/8

$5.89

410-0 LONG COLD CHISEL 12X3/4

$13.73

413-0 COLD CHISEL 7/8X7-1/2

$10.74

431-0 SCRATCH AWL 7"

$11.03

473-0 FLOOR CHISEL 3X11"

$18.60

532-0 CENTER PUNCH 7/16X5

$6.76

539-0 PRICK PUNCH 1/4X4

$5.31

583-0 PIN PUNCH 5/32X5-1/2

$6.71

592-0 PIN PUNCH 1/16X4-1/2

$5.38

606-0 DRIFT PUNCH 1/4IN

$17.73

CLIP STRIP MINI PRY BAR

$5.96

Dasco Pro 253-0 Roll Pin Punch, 1/8 in Tip, 4 in L, Steel

$7.71

Dasco Pro 255-0 Roll Pin Punch, 3/16 in Tip, 4-1/2 in L, Steel

$9.32

Dasco Pro 337-0 Utility Chisel, 1-1/4 in Tip, 12 in OAL, HCS Blade

$13.58

Dasco Pro 401-0 Cold Chisel, 5/16 in Tip, 5-1/4 in OAL, HCS Blade

$6.18

Dasco Pro 402-0 Cold Chisel, 3/8 in Tip, 5-5/8 in OAL, HCS Blade

$6.40

Dasco Pro 434-0 Brick Set, 2-1/2 in W Blade, 7 in OAL, HCS Blade

$12.34

Description
Reviews

Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal.

Same Category
Same Manufacturer

532-0 CENTER PUNCH 7/16X5

PUNCH CENTER 7/16 X 5IN LGTH..

$6.76

In Stock

539-0 PRICK PUNCH 1/4X4

PUNCH PRICK 1/4 PT X 4 IN LGTH..

$5.31

583-0 PIN PUNCH 5/32X5-1/2

In Stock

PUNCH PIN 5/32PT X5-1/2IN LGTH..

$6.71

592-0 PIN PUNCH 1/16X4-1/2

PUNCH PIN 1/16PT X4-1/2IN LGTH..

$5.38

606-0 DRIFT PUNCH 1/4IN

PUNCH DRFT 1/4IN TAPER 12IN OL..

$17.73

Dasco Pro 253-0 Roll Pin Punch, 1/8 in Tip, 4 in L, Steel

Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft...

$7.71

Dasco Pro 255-0 Roll Pin Punch, 3/16 in Tip, 4-1/2 in L, Steel

Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft...

$9.32

Dasco Pro 540-0 Prick Punch, 5/16 in Tip, 4-1/2 in L, HCS

Made of heat-treated high carbon tough American steel that's polished and tapered. Used for marking scribe work pieces and layout work, these sharp po..

$5.44

Dasco Pro 565-0 Solid Punch, 5/32 in Tip, 5-1/2 in L, HCS

Made from heat-treated high carbon American steel. Designed for installing pins, keys, rivets and for starting their removal...

$7.96

General 70079 Center Punch, 1/2 in Tip, 5 in L, Aluminum

Lightweight aluminum body with alloy steel internal components that provides accurate center punches to prevent drill bits from traveling. One-handed ..

$13.31

General 77 Center Punch, 5/8 in Tip, 5 in L, Aluminum

Lightweight aluminum body with alloy steel internal components, provides accurate center punches without drill bit traveling. One-handed operation, no..

$16.64

General 79 Center Punch, 1/2 in Tip, 4-7/8 in L, Steel

Provides accurate center punches to prevent drill bits from traveling, handles heavy-duty metals, yet not overbearing when working with wood or thin-w..

$23.78

General 87 Center Punch, 5/16 in Tip, 5-3/4 in L, Aluminum

Provides accurate center punches without drill bit traveling, one-handed operation, no hammer needed. Spring tension impact adjustments for working wi..

$16.05

General Jiffy Series 806 Self-Center Punch, 3/8 in Tip, 2-1/2 in L, Steel

Hardened steel pin, knurled body provides no-slip grip, auto-centering and countersunk end. Used for creating starter screw holes...

$5.40

Hit Tool CP0PP0 Prick Punch and Center Punch, 1/8, 3/16 in Tip, 7 in L, Steel, Black-Oxide

Hit Tool Prick Punch and Center Punch, 1/8, 3/16 in Tip, Shank Type: Spring Loaded, Steel, Black-Oxide, 7 in L..

$12.02

Mayhew 41202 Center Punch, 5/32 in Tip, 5-1/8 in L, 5/16 in Dia Shank

Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole ..

$5.04

Mayhew 41702 Center Punch, 5/16 in Tip, 10-1/2 in L, 1/2 in Dia Shank

Center punches are used for piercing, marking or starting drills in metal and other materials. The points differ to achieve the most appropriate hole ..

$7.48

Mayhew 42002 Pin Punch, 3/32 in Tip, 7-3/4 in L

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black ox..

$5.04

Mayhew 42102 Pin Punch, 1/8 in Tip, 4-1/2 in L, 1/4 in Dia Shank, Hex Shank

Mayhew Pin Punch, 1/8 in Tip, Shank Type: Hex, Shank Diameter: 1/4 in, Black Oxide, 4-1/2 in L..

$5.36

Mayhew 42302 Pin Punch, 5/32 in Tip, 6 in L, Hex Shank

Pin punches are used to drive out and remove loosened pins and keys, not for seized pins and keys. Extensive sizes are available as well as a black ox..

$5.72

265RBM MED/FINE SAW BLADE 10.5

In Stock

BLADE SAW FLSH CUT 10-1/2IN..

$16.31

332-0 MASONRY CHISEL 1-1/4"

CHISEL MASONRY 1-1/4X7-1/2INCH..

$11.85

333-0 MASONRY CHISEL 1-3/4"

In Stock

CHISEL MASONRY 1-3/4X7-1/2INCH..

$12.37

400-0 COLD CHISEL 1/4X4-7/8

In Stock

CHISEL COLD 1/4 CUT 4-7/8 LGTH..

$5.89

410-0 LONG COLD CHISEL 12X3/4

In Stock

CHISEL CLD 3/4IN CUT 12IN LGTH..

$13.73

413-0 COLD CHISEL 7/8X7-1/2

In Stock

CHISEL COLD 7/8 CUT 7-1/2 LGTH..

$10.74

In Stock

431-0 SCRATCH AWL 7"

AWL SCRATCH 7 INCH STEEL..

$11.03

In Stock

473-0 FLOOR CHISEL 3X11"

CHISEL FLOOR 3 X 11 INCH STEEL..

$18.60

532-0 CENTER PUNCH 7/16X5

PUNCH CENTER 7/16 X 5IN LGTH..

$6.76

In Stock

539-0 PRICK PUNCH 1/4X4

PUNCH PRICK 1/4 PT X 4 IN LGTH..

$5.31

583-0 PIN PUNCH 5/32X5-1/2

In Stock

PUNCH PIN 5/32PT X5-1/2IN LGTH..

$6.71

592-0 PIN PUNCH 1/16X4-1/2

PUNCH PIN 1/16PT X4-1/2IN LGTH..

$5.38

606-0 DRIFT PUNCH 1/4IN

PUNCH DRFT 1/4IN TAPER 12IN OL..

$17.73

CLIP STRIP MINI PRY BAR

High quality tempered steel. Rust-resistant powder coat finish. Rocker head provides additional leverage. Beveled nail slots...

$5.96

Dasco Pro 253-0 Roll Pin Punch, 1/8 in Tip, 4 in L, Steel

Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft...

$7.71

Dasco Pro 255-0 Roll Pin Punch, 3/16 in Tip, 4-1/2 in L, Steel

Made of heat-treated high carbon American steel. Machined specifically for removing spring or roll pins. Made with a hardened point, long shaft...

$9.32

Dasco Pro 337-0 Utility Chisel, 1-1/4 in Tip, 12 in OAL, HCS Blade

Dasco Pro long cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of h..

$13.58

Dasco Pro 401-0 Cold Chisel, 5/16 in Tip, 5-1/4 in OAL, HCS Blade

Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high c..

$6.18

Dasco Pro 402-0 Cold Chisel, 3/8 in Tip, 5-5/8 in OAL, HCS Blade

Dasco Pro cold chisels are precision ground for cutting, shaping and removing metal that is softer than the cutting edge of the chisel. Made of high c..

$6.40

Dasco Pro 434-0 Brick Set, 2-1/2 in W Blade, 7 in OAL, HCS Blade

Made of heat treated high carbon American steel construction. Designed for scoring, cutting and trimming bricks and blocks. Features sharp, durable cu..

$12.34