CASEMENT OPERATORS

Replacing the old Truth EntryGard Series the TH 23028 is a left handed, 13-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plast..

Replacing the old Truth EntryGard Series the TH 23031 is a right handed, 13-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plas..

TH 23076 is a left handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (optiona..

TH 23077 is a right handed dual arm operator with a 4-1/16 in offset (up) link arm. The long continuous arm and the jointed arm create an action that pushes the sash open while pulling the hinge side of sash to the open position. This is the mechanism only - no cover or crank handle included (option..

TH 24000 is a matching combination cover in plastic and a matching die-cast crank, both in a bronze finish. Both cover and crank are specifically used on the Truth EntryGard dual arm operators TH 23076 through TH 23079...

TH 24002 is a matching combination cover in plastic and a matching die-cast crank, both in a white finish. Both cover and crank are specifically used on the EntryGard dual arm operators TH 23076 through TH 23079...

The H 3501 casement window operator is a left hand aluminum teardrop body type. It has a 8 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dri..

The H 3502 casement window operator is a left hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dri..

The H 3505 casement window operator is a left hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear drive..

The H 3507 casement window operator is a right hand aluminum teardrop body type. It has a 8 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dr..

The H 3508 casement window operator is a right hand aluminum teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dr..

The H 3511 casement window operator is a right hand bronze teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driv..

The H 3517 casement window operator is a bronze square body type. It has a 7 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven by a 3/8 i..

The H 3520 casement window operator is a right handed aluminum square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear dr..

The H 3523 casement window operator is a right handed bronze square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driv..

The H 3528 is non-handed casement operator for butt-hinged casement windows. It has a 10-3/4 in rotating arm and is only 1-3/8 in between screen and sash. It is driven by a heavy cast worm gear and has a full 90 deg motion in both directions. Found on Parlyn windows as well as many others. For brass..

The H 3687 is a brass non-handed casement operator for butt-hinged casement windows. It has a 10-3/4 in rotating arm and is only 1-3/8 in between screen and sash. It is driven by a heavy cast worm gear and has a full 90 deg motion in both directions. Found on Parlyn windows as well as many others. F..

The H 3708 casement window operator is a left hand white teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven..

The H 3709 casement window operator is a right hand white teardrop body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear drive..

The H 3711 casement window operator is a right hand white square body type. It has a 9 in steel arm with a round disc on the tip (some older styles had a small wheel instead of a disc). The disc slides in the H 3529 casement track located on the bottom of the casement window. It is worm gear driven ..

Replacing the old Truth EntryGard Series the TH 23022 is a left handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plasti..

Replacing the old Truth EntryGard Series the TH 23025 is a right handed, 9-1/2 in single arm operator with a baked enamel white finish. It is made of heavy-duty die-cast zinc. The steel arm, worm drive and gears are protected with a corrosive-resistant finish and it opens to a full 90 deg. The plast..

TH21937 ENTRYGARD OPERATOR COV..

OPR ARM LT HND CUTONE..

ARM CASEMENT 4-1/2IN GRY..